Anritsu Spectrum Master MT8212A Manuel utilisateur

Fast. Accurate, Repeatable, Portable Spectrum Analysis

Spectrum Master™

MS2711D

User’s Guide

MS2712

SiteMaster SpectrumMaster CellMaster

MS2711DSpectrumMaster

S331DSiteMaster SiteMaster SpectrumMaster MT8212A CellMaster CellMaster

WARRANTY

The Anritsu product(s) listed on the title page is (are) warranted against defects in

materials and workmanship for one year from the date of shipment.

Anritsu's obligation covers repairing or replacing products which prove to be defec-

tive during the warranty period. Buyers shall prepay transportation charges for

equipment returned to Anritsu for warranty repairs. Obligation is limited to the origi-

nal purchaser. Anritsu is not liable for consequential damages.

LIMITATION OF WARRANTY

The foregoing warranty does not apply to Anritsu connectors that have failed due to

normal wear. Also, the warranty does not apply to defects resulting from improper or

inadequate maintenance by the Buyer, unauthorized modification or misuse, or op-

eration outside the environmental specifications of the product. No other warranty is

expressed or implied, and the remedies provided herein are the Buyer's sole and

exclusive remedies.

TRADEMARK ACKNOWLEDGMENTS

MS-DOS, Windows, Windows for Workgroups, Windows 95/98/NT4/2000/ME/XP

are registered trademarks of the Microsoft Corporation.

Spectrum Master is a trademark of Anritsu Company.

NOTICE

Anritsu Company has prepared this manual for use by Anritsu Company personnel

and customers as a guide for the proper installation, operation and maintenance of

Anritsu Company equipment and computer programs. The drawings, specifications,

and information contained herein are the property of Anritsu Company, and any un-

authorized use or disclosure of these drawings, specifications, and information is

prohibited; they shall not be reproduced, copied, or used in whole or in part as the

basis for manufacture or sale of the equipment or software programs without the

prior written consent of Anritsu Company.

UPDATES

Updates to this manual, if any, may be downloaded from the Anritsu internet site at:

http://www.us.anritsu.com.

June 2008 10580-00097

Equipment marked with the Crossed-out Wheelie

Bin symbol complies with the European

Parliament and Council Directive 2002/96/EC (the

“WEEE Directive”) in European Union.the

For Products placed on the EU market after

August 13, 2005, please contact your local Anritsu

representative at the end of the product's useful

life to arrange disposal in accordance with your

initial contract and the local law.

ѻકЁ᳝↦᳝ᆇ⠽䋼៪ܗ㋴ⱘৡ⿄ঞ৿䞣

᳝↦᳝ᆇ⠽䋼៪ܗ㋴䚼ӊৡ⿄

䪙

3E

∲

+J

䬝

&G

݁Ӌ䫀

>&UĎ@

໮⒈㘨㣃

3%%

໮⒈Ѡ㣃䝮

3%'(

ࠋ㒓䏃ᵓ

3&$



hhƻƻ

ᴎ໇ǃᬃᶊ

&KDVVLV

h

ƻhhƻƻ

/&'hhhhƻƻ

݊Ҫ˄⬉㓚ǃ亢᠛ǃ

䖲᥹఼ㄝ˅

$SSHQGHGJRRGV

hƻhhƻƻ

ƻ˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ 6-7 󰵼ޚ㾘

ᅮⱘ䰤䞣㽕∖ҹϟǄ

h˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ 6-7

󰵼ޚ㾘ᅮⱘ䰤䞣㽕∖Ǆ

⦃ֱՓ⫼ᳳ䰤

䖭Ͼ󰵼䆄ᰃḍ᥂  ݀Ꮧⱘǋ⬉ᄤֵᙃѻક∵ᶧ᥻ࠊㅵ⧚ࡲ⊩ǌҹঞ

6-7ǋ⬉ᄤֵᙃѻક∵ᶧ᥻ࠊ󰵼䆚㽕∖ǌⱘ㾘ᅮˈ䗖⫼Ѣ೼Ё೑

䫔ଂⱘ⬉ᄤֵᙃѻકⱘ⦃ֱՓ⫼ᳳ䰤Ǆҙ䰤Ѣ೼䙉ᅜ䆹ѻકⱘᅝܼ㾘㣗ঞՓ⫼

⊼ᛣџ乍ⱘ෎⸔ϞˈҢ⫳ѻ᮹䍋ㅫⱘ䆹ᑈ䰤ݙˈϡӮ಴ѻક᠔৿᳝ᆇ⠽䋼ⱘ⊘

ⓣ៪さথᗻবᓖˈ㗠ᇍ⦃๗∵ᶧˈҎ䑿ঞ䋶ѻѻ⫳⏅ࠏഄᕅડǄ

⊼˅⬉∴ⱘ⦃ֱՓ⫼ᳳ䰤ᰃ  ᑈǄ⫳ѻ᮹ᳳ󰵼Ѣѻકᑣোⱘࠡಯⷕ

བ 61;;;;

 ᑈ㄀  ⫳ѻǄ

For Chinese Customers Only YLYB

Table of Contents

Chapter 1 - General Information

Introduction ..................................1-1

Description ...................................1-1

Standard Accessories .............................1-1

Options .....................................1-2

Printers .....................................1-2

Optional Accessories..............................1-3

Performance Specifications ..........................1-6

Preventive Maintenance ...........................1-10

Calibration ..................................1-11

Annual Calibration ..............................1-11

ESD Cautions .................................1-11

Anritsu Service Centers............................1-12

Chapter 2 - Quick Start Guide

Introduction ..................................2-1

Turning the MS2711D On for the First Time .................2-1

Front Panel Overview .............................2-2

Display Overview ...............................2-3

Test Panel Connectors ............................2-15

Making Spectrum Analyzer Measurements .................2-16

Making a Basic Measurement ........................2-22

Example – Measuring a 900 MHz signal...................2-22

Save and Recall Display ...........................2-27

Printing ....................................2-27

Battery Information..............................2-29

Charging a New Battery ...........................2-29

Charging the Battery in the Instrument ...................2-29

Charging the Battery in the Optional Charger ................2-29

Determining Remaining Battery Life.....................2-30

Symbols....................................2-33

Self Test ...................................2-34

Error Messages ................................2-35

Using the Soft Carrying Case.........................2-39

Chapter 3 - Key Functions

Introduction ..................................3-1

Hard Keys ...................................3-1

Soft Keys....................................3-4

Power Meter (Internal).............................3-4

Power Monitor (External Detector) Option 5 .................3-8

High Accuracy Power Meter (Option 19) ..................3-10

Spectrum Analyzer Menus ..........................3-12

Transmission Measurement Menus......................3-27

Interference Analyzer Mode (Option 25)...................3-36

Channel Scanner Mode (Option 27) .....................3-46

CW Signal Generator Mode (Option 28) ...................3-50

All Modes...................................3-53

Chapter 4 - Measurement Fundamentals

Introduction ..................................4-1

Measurement Fundamentals ..........................4-1

Preamplifier ..................................4-4

Preamplifier Operation.............................4-4

Preamplifier Measurement Example......................4-5

Chapter 5 - Field Measurements

Introduction ..................................5-1

Occupied Bandwidth..............................5-1

Channel Power Measurement .........................5-3

CDMA Channel Power Measurement .....................5-3

GSM Channel Power Measurement ......................5-5

AMPS Channel Power Measurement .....................5-7

Adjacent Channel Power Ratio ........................5-9

Adjacent Channel Power Measurement ....................5-9

GSM Adjacent Channel Power Measurement ................5-11

AMPS (TDMA) Adjacent Channel Power Measurement ..........5-13

Out-of-Band Spurious Emissions.......................5-15

Out-of-Band Spurious Emission Measurement ...............5-15

In-band/Out-of-Channel Measurements ...................5-17

In-band Spurious Measurement .......................5-17

Field Strength .................................5-19

Dynamic Attenuation Control ........................5-22

Frequency Converter Interface (Option 6) ..................5-23

Bias Tee (Option 10) .............................5-23

AM/FM Demodulation ............................5-24

Demodulation Procedure ...........................5-24

Carrier to Interference Ratio Measurement..................5-26

Interference Analysis .............................5-29

Noise Marker .................................5-30

Chapter 6 - Power Measurements

Introduction ..................................6-1

Making Power Measurements with the Option 29 Power Meter (Internal) . . 6-1

Making Power Measurements with the Option 5 Power Monitor (External) . 6-4

Making Power Measurements with the Option 19 High Accuracy Power Meter6-6

Chapter 7 - Transmission Measurement

Introduction ..................................7-1

Measuring Active Devices ...........................7-1

Calibration ...................................7-1

Transmission Measurement Procedure ....................7-2

Chapter 8 - GPS Feature

Introduction ..................................8-1

Activating the GPS Feature ..........................8-1

Saving with GPS Information .........................8-3

Recalling GPS Information ..........................8-3

Chapter 9 - Interference Analyzer Mode

Introduction ..................................9-1

Interference Analysis .............................9-1

Spectrogram ..................................9-1

Signal Strength .................................9-3

RSSI ......................................9-4

Signal ID ...................................9-5

Chapter 10 - Channel Scanner Mode

Introduction ..................................10-1

Channel Scanner ...............................10-1

Chapter 11 - Signal Generator Mode

Introduction ..................................11-1

Required Equipment .............................11-1

Procedure ...................................11-1

Softkeys....................................11-2

Chapter 12 - Handheld Software Tools

Introduction ..................................12-1

Features ....................................12-1

System Requirements.............................12-1

Installation ..................................12-2

Using Handheld Software Tools .......................12-3

Downloading Traces .............................12-3

Plot Capture to the PC ............................12-4

Plot Upload to the Instrument ........................12-4

Plot Properties ................................12-4

Index

iii

Chapter 1

General Information

Introduction

This chapter provides a description, performance specifications, optional accessories, pre-

ventive maintenance, and calibration requirements for the Anritsu Handheld Spectrum Ana-

lyzer model listed below. Throughout this manual, this instrument may be referred to as an

Anritsu Spectrum Masterä.

Model Frequency Range

MS2711D 100 kHz to 3 GHz

Description

The Anritsu Spectrum Master is a synthesizer-based hand held spectrum analyzer that pro-

vides quick and accurate signal results. Measurements can be easily made by using the

main instrument functions: frequency, span, amplitude and bandwidth. Dedicated keys for

common functions and a familiar calculator-type keypad are available for fast data entry.

Automatic time and date stamping of measurement data of up to 200 results is provided as

is storage and recall of up to 10 measurement setups. A large, daylight-viewable TFT color

display provides easy viewing in a variety of lighting conditions. The Anritsu Spectrum

Master is capable of up to one and one-half hours of continuous operation from a fully

charged battery and can be operated from a 12.5 Vdc source (which also simultaneously

charges the battery). Built-in energy conservation features can be used to extend battery life

over an eight-hour workday.

The Anritsu Spectrum Master is designed for monitoring, measuring, and analyzing signal

environments. Typical measurements include: in-band interference, transmit spectrum anal-

ysis, antenna isolation and cell area interference. A full range of marker capabilities such as

peak, center and delta functions are provided for faster, more comprehensive measurement

of displayed signals. Multiple limit lines are available for creating quick, simple pass/fail

measurements. A menu option provides for an audible beep when the limit value is ex-

ceeded.

Standard Accessories

Anritsu Handheld Software Tools, a PC-based software program, provides an on-line data-

base record for storing measurement data. Handheld Software Tools can also convert the

Anritsu Spectrum Master display to a Microsoft Windows 95/98/NT4/2000/ME/XP

graphic. Measurements stored in the Anritsu Spectrum Master internal memory can be

down-loaded to a PC using the included null-modem serial cable. Once stored, the graphic

trace can then be displayed, scaled, or enhanced with markers and limit lines. Historical

graphs can be overlaid with current data using the PC mouse in a drag-and-drop fashion.

The underlying data can be extracted and used in spreadsheets or for other analytical tasks.

1-1

The following standard accessories are supplied with the MS2711D:

·10580-00097 MS2711D Spectrum Master User's Guide

·48258 Soft Carrying Case, part number

·40-168 AC-DC Adapter with Power Cord

·806-62 Automotive Cigarette Lighter 12 Volt DC Adapter

·633-27 Rechargeable NiMH Battery

·800-441 Serial Interface Cable (null modem type)

·2300-347 Anritsu Handheld Software Tools CDROM

·One Year Warranty (includes battery, firmware, and software)

Options

·Option 5 Power Monitor - Requires external detector

·Option 6 Frequency Converter Interface

·Option 10 Bias Tee

·Option 19 High Accuracy Power Meter (sensor not included)

·Option 21 Transmission Measurement

·Option 25 Interference Analyzer - Requires directional antenna

·Option 27 Channel Scanner

·Option 28 CW Signal Generator - Requires CW Signal Generator Kit

(Anritsu Part Number 61534)

·Option 29 Internal Power Meter

·Option 31 GPS - Requires GPS Antenna

NOTE: Options 5 and 6 are mutually exclusive. That is, the MS2711D can be

configured with either Option 5, Power Monitor, or Option 6, Frequency Con-

verter Interface, but not both.

Printers

·2000-1214 HP DeskJet 450 Printer, w/ Interface Cable, Black Print Cartridge,

and U.S. Power Cable and Cable Adapter

·2000-753 Serial-to-Parallel Converter Cable

·2000-1216 Black Print Cartridge

·2000-1217 Rechargeable Battery Pack for HP 450 Deskjet

·2000-663 Power Cable (Europe) for DeskJet Printer

·2000-664 Power Cable (Australia) for DeskJet Printer

·2000-1218 Power Cable (U.K.) for DeskJet Printer

·2000-666 Power Cord (Japan) for DeskJet Printer

·2000-667 Power Cable (So. Africa) for DeskJet Printer

1-2

Chapter 1 General Information

Table des matières

Autres manuels Anritsu Instrument de mesure

Anritsu

Anritsu BTS Master Manuel utilisateur

Anritsu

Anritsu Bit Master MP1026B Manuel du propriétaire

Anritsu

Anritsu MT8820A Manuel utilisateur

Anritsu

Anritsu ML2480B Series Manuel utilisateur

Anritsu

Anritsu MS2690A Manuel d'installation

Anritsu

Anritsu MP1595A Manuel utilisateur

Anritsu

Anritsu Site Master S114C Manuel utilisateur

Anritsu

Anritsu BTS Master MT8222A Manuel utilisateur

Anritsu

Anritsu MU196020A PAM4 PPG Manuel utilisateur

Anritsu

Anritsu VectorStar ME7848A-0272 Manuel utilisateur

Anritsu

Anritsu ML248 A Series Manuel utilisateur

Anritsu

Anritsu Lightning 37 E Series Manuel utilisateur

Anritsu

Anritsu Microwave Site Master S820E Manuel utilisateur

Anritsu

Anritsu MP1590B Manuel utilisateur

Anritsu

Anritsu MS2690A Manuel utilisateur

Anritsu

Anritsu ShockLine MS46131A-020 Manuel utilisateur

Anritsu

Anritsu LMR Master Manuel utilisateur

Anritsu

Anritsu MS462 Series Manuel utilisateur

Anritsu

Anritsu VectorStar ME7848A Series Manuel utilisateur

Anritsu

Anritsu CMA50 Manuel utilisateur

Anritsu

Anritsu Network Master MT9090A Series Manuel utilisateur

Anritsu

Anritsu Spectrum Master MS2721B Manuel utilisateur

Anritsu

Anritsu MS2830A-040 Manuel utilisateur

Anritsu

Anritsu MT8802A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur