Anritsu MS2711A Manuel utilisateur

MS2711A

Hand Held

Spectrum Analyzer

User's Guide

Hand-Held Spectrum Analyzer for Measuring,

Monitoring and Analyzing Signal Environments

color cover part #: 00986-00040

Advanced Test Equipment Rentals

www.atecorp.com 800-404-ATEC (2832)

WARRANTY

The Anritsu product(s) listed on the title page is (are) warranted against defects in

materials and workmanship for one year from the date of shipment.

Anritsu's obligation covers repairing or replacing products which prove to be defec-

tive during the warranty period. Buyers shall prepay transportation charges for

equipment returned to Anritsu for warranty repairs. Obligation is limited to the origi-

nal purchaser. Anritsu is not liable for consequential damages.

LIMITATION OF WARRANTY

The foregoing warranty does not apply to Anritsu connectors that have failed due to

normal wear. Also, the warranty does not apply to defects resulting from improper or

inadequate maintenance by the Buyer, unauthorized modification or misuse, or op-

eration outside the environmental specifications of the product. No other warranty is

expressed or implied, and the remedies provided herein are the Buyer's sole and

exclusive remedies.

TRADEMARK ACKNOWLEDGMENTS

MS-DOS, Windows, Windows for Workgroups, Windows NT, and Windows 95 are

registered trademarks of the Microsoft Corporation.

Anritsu and Cable Mate are trademarks of Anritsu Company.

NOTICE

Anritsu Company has prepared this manual for use by Anritsu Company personnel

and customers as a guide for the proper installation, operation and maintenance of

Anritsu Company equipment and computer programs. The drawings, specifications,

and information contained herein are the property of Anritsu Company, and any un-

authorized use or disclosure of these drawings, specifications, and information is

prohibited; they shall not be reproduced, copied, or used in whole or in part as the

basis for manufacture or sale of the equipment or software programs without the

prior written consent of Anritsu Company.

Table of Contents

Chapter 1 - General Information 1-1

Introduction..................................1-1

Description ..................................1-1

Standard Accessories.............................1-1

Options ....................................1-2

Printers ....................................1-2

Optional Accessories .............................1-2

Performance Specifications .........................1-4

Preventive Maintenance ...........................1-6

Calibration ..................................1-6

Annual Verification..............................1-6

Anritsu Service Centers ...........................1-6

Chapter 2 - Quick Start Guide 2-1

Introduction..................................2-1

Turning the MS2711A On for the First Time ...............2-1

Front Panel Overview ............................2-2

Test Panel Connectors ............................2-5

Making Spectrum Analyzer Measurements ................2-6

Required Equipment......................................2-6

Procedure ............................................2-6

Making a Measurement ....................................2-6

Selecting the Frequency ....................................2-6

Selecting the Span .......................................2-6

Selecting the Amplitude ....................................2-7

Selecting Bandwidth Parameters . . .............................2-7

Selecting Sweep Parameters. . . . . .............................2-7

Adjusting Markers .......................................2-7

Adjusting Limits ........................................2-8

Adjusting Attenuator Settings. ................................2-8

Making a Basic Measurement ........................2-9

Example – Measuring a 900 MHz signal ..................2-9

Set the center frequency ....................................2-9

Set the frequency span ....................................2-10

Set the amplitude .......................................2-11

Activate the marker......................................2-12

Save the Display........................................2-13

Recall the Display .......................................2-13

Printing....................................2-13

Printer Switch Settings ....................................2-13

Printing a Screen .......................................2-14

Determining Remaining Battery Life ...................2-15

Symbols ...................................2-16

Self Test ...................................2-16

June 2002 10580-00048

Error Codes .................................2-17

Self Test Errors ........................................2-17

Range Errors .........................................2-17

Using the Soft Carrying Case........................2-18

Chapter 3 - Key Functions 3-1

Introduction..................................3-1

Hard Keys............................................3-1

Soft Keys ............................................3-4

Chapter 4 - Advanced Measurement Fundamentals 4-1

Introduction..................................4-1

Advanced Measurement Fundamentals...................4-1

Chapter 5 - Field Measurements 5-1

Introduction..................................5-1

Occupied Bandwidth .............................5-1

XdB Down Method.......................................5-1

N% Method...........................................5-1

Occupied Bandwidth Measurement with the MS2711A ..........5-1

Required Equipment......................................5-1

Procedure ............................................5-1

Adjacent Channel Power Leakage .....................5-2

Adjacent Channel Power Measurement with the MS2711A........5-2

Required Equipment......................................5-2

Procedure ............................................5-2

Out-of-Band Spurious Emission Measurements ..............5-3

Out-of-band Spurious Measurement with the MS2711A .........5-3

Required Equipment......................................5-3

Procedure ............................................5-3

In-Band/Out-Of-Channel Measurements..................5-4

In-band Spurious Measurement with the MS2711A ............5-4

Required Equipment......................................5-4

Procedure ............................................5-4

Field Strength.................................5-5

Required Equipment......................................5-5

Procedure ............................................5-5

ANTENNA CALCULATIONS . . . .............................5-6

Making Power Measurements with the Power Meter ...........5-7

Displaying Power in dBm and Watts .............................5-7

Displaying Relative Power. . . . . . .............................5-7

AM/FM Demodulation ............................5-8

Chapter 6 - Software Tools Program 6-1

Description ..................................6-1

Requirements .................................6-1

Communication Port Setting.........................6-1

Changing COM Port Settings–Windows 95/98/NT/2000 .........6-1

Software Installation .............................6-2

Plot Capture..................................6-3

Capture multiple to database . ................................6-3

Capture multiple traces to PC screen.............................6-4

Single trace capture ......................................6-4

Program Operation..............................6-4

Entering Antenna Factors ..........................6-5

Uploading Antenna Factors .........................6-5

Saving a Plot as a Windows Metafile ....................6-6

Saving Data to a Spreadsheet ........................6-6

Saving Data as a Data File ..........................6-6

Saving Data to a Database ..........................6-6

“Drag-n-Drop” ................................6-7

Printing ....................................6-7

iii

1-0

Chapter 1 General Information

MS2711A

CONT

SINGLE

TRACE MEAS

SAVE

SETUP

RECALL

SETUP

LIMIT MARKER

SAVE

DISPLAY

RECALL

DISPLAY

MODE FREQ / SPAN AMPLITUDE BW/SWEEP

SYS

ENTER

CLEAR

ESCAPE

OFF

Figure 1-1. Anritsu MS2711A Hand Held Spectrum Analyzer™

Chapter 1

General Information

Introduction

This chapter provides a description, performance specifications, optional accessories, pre-

ventive maintenance, and calibration requirements for the Anritsu Hand Held Spectrum An-

alyzer model listed below. Throughout this manual, this instrument may be referred to as an

Anritsu HHSA.

Model Frequency Range

MS2711A 100 kHz to 3000 MHz

Description

The Anritsu HHSA is a synthesized-based hand held spectrum analyzer that provides quick

and accurate signal results. Measurements can be easily made by using the main instrument

functions: frequency, span, amplitude and bandwidth. Dedicated keys for common func-

tions and a familiar calculator type keypad are available for fast data entry. Automatic time

and date stamping of measurement data of up to 200 results is provided as is storage and re-

call of up to 10 different measurement setups. A large, high-resolution liquid crystal display

(LCD) provides easy viewing in a variety of lighting conditions. The Anritsu HHSA is ca-

pable of up to two and one-half hours of continuous operation from a fully charged battery

and can be operated from a 12.5 Vdc source (which will also simultaneously charge the bat-

tery). Built-in energy conservation features can be used to extend battery life over an

eight-hour workday.

The Anritsu HHSA is designed for monitoring, measuring, and analyzing signal environ-

ments. Typical measurements include: in-band interference, transmit spectrum analysis, an-

tenna isolation and cell area interference. A full range of marker capabilities such as peak,

center and delta functions are provided for faster, more comprehensive measurement of dis-

played signals. Limit lines are available for creating quick, simple pass/fail measurements.

A menu option provides for an audible beep when the limit value is exceeded. To permit

use in low-light environments, the LCD can be back lit using a front panel key.

Standard Accessories

Anritsu HHSA Software Tools, a PC based software program, provides an on-line database

record for storing measurement data. Software Tools can also convert the Anritsu HHSA

display to a Microsoft Windows 95/98ägraphic. Measurements stored in the Anritsu

HHSA internal memory can be down-loaded to a PC using the included null-modem serial

cable. Once stored, the graphic trace can then be displayed, scaled, or enhanced with mark-

ers and limit lines. Historical graphs can be overlaid with current data using the PC mouse

in a drag-and-drop fashion. The underlying data can be extracted and used in spreadsheets

or for other analytical tasks.

1-1

The following standard accessories are supplied with the MS2711A:

·Soft Carrying Case

·AC-DC Adapter

·Automotive Cigarette Lighter 12 Volt DC Adapter

·CD ROM containing the Software Tools program.

·Serial Interface Cable (Null Modem Type)

·Rechargeable NiMH Battery

·One year Warranty (includes battery, firmware, and software)

·User's Guide

Options

·Option 5 — Add RF Wattmeter Power Monitor (RF detector not included)

Printers

·2000-766 HP DeskJet Printer, with Interface Cable, Black Print Cartridge,

and U.S. Power Cable

·2000-753 Serial-to-Parallel Converter Cable

·2000-661 Black Print Cartridge

·2000-662 Rechargeable Battery for DeskJet Printer

·2000-663 Power Cable (Europe) for DeskJet Printer

·2000-664 Power Cable (Australia) for DeskJet Printer

·2000-665 Power Cable (U.K.) for DeskJet Printer

·2000-667 Power Cable (So. Africa) for DeskJet Printer

·2000-1008 Sieko DPU-414-30BU Thermal Printer with Internal

Battery, Thermal Printer Paper, Serial Cable, Power Cable

·2000-755 Five rolls of Thermal Paper

·2000-1002 U.S. Adapter for Seiko DPU-414-30B

·2000-1003 Euro Adapter for Seiko DPU-414-30B

·2000-1004 Battery Pack Adapter for Seiko DPU-414-30B

·2000-1012 Serial 9-pin male to 9-pin female cable for Seiko DPU-414-30B

·2000-1046 Serial-to-parallel Converter Cable w/ DIP switch labeling, 36-pin

female Centronics to DB25 female

Optional Accessories

Optional Accessories are shown in Table 1-1

1-2

Chapter 1 General Information

1-3

Chapter 1 General Information

Part Number Description

5400-71N50

42N50A-30 RF Detector, N(m), 50 ohm, 1 to 3000 MHz

Attenuator, 30 dB, 50 Watt, bi-directional

15NN50-1.5A Test Port Cable Armored, 1.5 meter, N(m) to N(m), 3.5 GHz

15NN50-3.0A Test Port Cable Armored, 3.0 meter, N(m) to N(m), 3.5 GHz

15NN50-5.0A Test Port Cable Armored, 5.0 meter, N(m) to N(m), 3.5 GHz

15NNF50-1.5A Test Port Cable Armored, 1.5 meter, N(m) to N(f), 3.5 GHz

15NNF50-5.0A Test Port Cable Armored, 3.0 meter, N(m) to N(f), 3.5 GHz

15NNF50-3.0A Test Port Cable Armored, 5.0 meter, N(m) to N(f), 3.5 GHz

15ND50-1.5A Test Port Cable Armored, 1.5 meter, N(m) to 7/16 DIN(m), 3.5 GHz

15NDF50-1.5A Test Port Cable Armored, 1.5 meter, N(m) to 7/16 DIN(f), 3.5 GHz

800-109 Detector Extender Cable, 7.6m (25 ft.)

800-110 Detector Extender Cable, 15.2m (50 ft.)

800-111 Detector Extender Cable, 30.5m (100 ft.)

800-112 Detector Extender Cable, 61m (200 ft.)

510-90 Adapter 7-16 (f) to N(m), 3.5 GHz

510-91 Adapter 7-16 (f) to N(f), 3.5 GHz

510-92 Adapter 7-16 (m) to N(m), 3.5 GHz

510-96 Adapter 7-16 DIN (m) to 7/16 DIN (m), 3.5 GHz

510-97 Adapter 7-16 DIN (f) to 7/16 DIN (f), 3.5 GHz

1091-26 Adapter, DC to 18 GHz, 50 Ohm, N(m)-SMA(m)

1091-27 Adapter, DC to 18 GHz, 50 Ohm, N(m)-SMA(f)

1091-172 Adapter, DC to 1.3 GHz, 50 Ohm, N(m)-BNC(f)

34NN50A Precision Adapter, DC to 18 GHz, 50 Ohm, N(m)-N(m)

34NFNF50 Precision Adapter, DC to 18 GHz, 50 Ohm, N(f)-N(f)

48258 Spare Soft Carrying Case

40-115 Spare AC/DC Adapter

806-62 Spare Automotive Cigarette Lighter/12 Volt DC adapter

800-441 Spare Serial Interface Cable

760-215A Transit Case for Anritsu Hand Held Spectrum Analyzer

633-27 Rechargeable Battery, NiMH

2300-347 Anritsu Hand Held Spectrum Analyzer Software Tools

10580-00048 Anritsu HHSA User’s Guide, Model MS2711A

10580-00049

10580-00050 Anritsu HHSA Programming Manual, Model MS2711A

Anritsu HHSA Maintenance Manual, Model MS2711A

2000-1029 Battery Charger (NiMH), with Universal Power Supply

2000-1030 Portable Antenna, 50 Ohm, SMA (m), 1.71 to 1.88 GHz

2000-1031 Portable Antenna, 50 Ohm, SMA (m), 1.85 to 1.99 GHz

2000-1032 Portable Antenna, SMA (m), 2.4 to 2.5 GHz, 50 Ohm

2000-1034 Portable Antenna, 50 Ohm, SMA (f), 806-960 MHz

2000-1035

70-28 Portable Antenna, 50 Ohm, SMA (m), 902-960 MHz

Headset

Table 1-1. Optional Accessories

Autres manuels pour MS2711A

Table des matières

Autres manuels Anritsu Instrument de mesure

Anritsu

Anritsu Network Data Analyzer MD6430A Manuel utilisateur

Anritsu

Anritsu MS2830A Manuel utilisateur

Anritsu

Anritsu MP1800A Manuel utilisateur

Anritsu

Anritsu Bit Master MP1026B Manuel du propriétaire

Anritsu

Anritsu MS27101A-IBCM Manuel utilisateur

Anritsu

Anritsu MP1632C Manuel utilisateur

Anritsu

Anritsu Spectrum Master MS2720T Manuel utilisateur

Anritsu

Anritsu MU196020A PAM4 PPG Manuel utilisateur

Anritsu

Anritsu ms2602a Manuel utilisateur

Anritsu

Anritsu MU196060A Manuel utilisateur

Anritsu

Anritsu Spectrum Master MS2721A Manuel utilisateur

Anritsu

Anritsu Cell Master MT8212B Manuel utilisateur

Anritsu

Anritsu MS2711B Manuel utilisateur

Anritsu

Anritsu ShockLine MS46131A-020 Manuel utilisateur

Anritsu

Anritsu MT8801C Manuel utilisateur

Anritsu

Anritsu HA-100 Series Manuel utilisateur

Anritsu

Anritsu Site Master S331D Manuel du propriétaire

Anritsu

Anritsu Spectrum Master MS2720T Manuel utilisateur

Anritsu

Anritsu Field Master Manuel utilisateur

Anritsu

Anritsu MS27100A Manuel utilisateur

Anritsu

Anritsu Field Master MS2080A Manuel utilisateur

Anritsu

Anritsu MT9085 Series Manuel d'instructions

Anritsu

Anritsu MT8820A Manuel utilisateur

Anritsu

Anritsu LMR Master Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur