AMD MD740 Manuel utilisateur

MB740

AMD Geode NX

Mini-ITX Motherboard

USER’S MANUAL

Version 1.0

ii MB740 User’s Manual

Acknowledgments

Award is a registered trademark of Award Software International,

Inc.

PS/2 is a trademark of International Business Machines

Corporation.

AMD is a trademark of Advanced Micro Devices, Inc.

Microsoft Windows is a registered trademark of Microsoft

Corporation.

Winbond is a registered trademark of Winbond Electronics

Corporation.

All other product names or trademarks are properties of their

respective owners.

MB740 User’s Manual iii

Table of Contents

Introduction.......................................................1

Product Description.............................................................1

Checklist..............................................................................2

MB740 Specifications.........................................................3

Board Dimensions...............................................................4

Installations.......................................................5

Installing the CPU...............................................................6

Installing the Memory.........................................................7

Setting the Jumpers .............................................................8

Connectors on MB740 ......................................................11

BIOS Setup.......................................................21

Drivers Installation......................................41

SIS 741CX Chipset VGA Driver ......................................42

SIS Chipset Ethernet Driver..............................................45

Realtek Gigabit Ethernet Driver........................................46

Realtek AC97 Codec Driver .............................................47

Appendix...........................................................49

A. I/O Port Address Map...................................................49

B. Interrupt Request Lines (IRQ)......................................50

C. Watchdog Timer Configuration....................................52

D. Digital I/O Sample Code..............................................56

THE MB740 MINI ITX MOTHERBOARD

iv MB740 User’s Manual

INTRODUCTION

MB740 User’s Manual 1

Introduction

Product Description

The MB740 Mini ITX board incorporates a Socket A processor socket that

supports AMD Geode NX series processors that support processor speed up to

1.4GHz. With the SIS 741CX chipset, it delivers maximum performance for

demanding thin client or embedded applications that require silent system

operation. With a higher processor speed and active cooling, it is best suited for

demanding applications such as graphics and point of sales systems. The board

comes with integrated chipset VGA and Ethernet controllers. Optionally

provided is a Realtek Gigabit Ethernet and daughter cards for CRT2/TMDS or

LVDS/TV out interface.

Features

Socket A for AMD Geode NX processor

Up to 1.4GHz speed, 133MHz FSB

DDR DIMM x 1, max. 1GB, DDR266/333

Onboard 10/100 and Optional Realtek 8110S Gigabit LAN

Integrated SiS 741CX CRT VGA

Optional CRT2/DVI, optional LVDS/TV out

2 x SATA, 6 x USB 2.0, 2 x COM, watchdog timer

Digital I/O, optional 1394, 1x PCI, 1x Mini PCI

Dimensions of the board are 170mm x 170mm. Optional daughter cards include

IBA140-301 support CRT2/DVI and IBA140-302 supporting LVDS/TV out.

INTRODUCTION

2MB740 User’s Manual

Checklist

Your MB740 package should include the items listed below.

•The MB740 AMD Geode Mini-ITX motherboard

•This User’s Manual

•1 CD containing chipset drivers and flash memory utility

•Cable kit (40-pin IDE, Serial port, Serial ATA)

440

INTRODUCTION

MB740 User’s Manual 3

MB740 Specifications

[

Features Socket A for AMD Geode NX processor

Up to 1.4GHz speed, 133MHz FSB

DDR DIMM x 1, max. 1GB, DDR266/333

Onboard 10/100 and Optional Realtek 8110S Gigabit LAN

Integrated SiS 741CX CRT VGA

Optional CRT2/DVI, optional LVDS/TV out

2 x SATA, 6 x USB 2.0, 2 x COM, watchdog timer

Digital I/O, optional 1394, 1x PCI, 1x Mini PCI

System

CPU Socket A (462-pin) for AMD Geode, up to 1.4GHz

(NX1250 = 667MHz, NX1500 = 1GHz, NX1750 =1.4GHz)

System Memory DDR DIMM x 1, max. 1GB, DDR333

System Chipset SiS 741CX + SiS 964

BIOS Award 4Mbit

Watchdog Timer 256 levels

SSD Optional CF socket (on solder side via IDE2)

H/W Monitor Yes

Expansion Slot 1 PCI, 1 Mini PCI, 1 MicroAGP

Graphics

VGA Controller SiS 741CX integrated for CRT

VGA Memory Shared memory; Max. 64MB

LCD / TV-out / DVI /

CRT2 Optional SiS 302LV MicroAGP card (IBA140-302)

supports 18/24-bit dual channel LVDS and TV out;

Optional SiS 301 MicroAGP card (IBA140-301)

supports DVI/CRT2 interface

Ethernet

Controller SiS 964 built-in 10/100 and Optional Realtek

RTL8110S-32 Gigabit LAN

Multi I/O

Chipset SiS 964, ITE 8705

2x IDE (UDMA33/66/100), 1x FDD, 1x KB, 1x Mouse; 2x

RS-232, 2x SATA

USB 4 ports on board

Pin header for 2 additional ports (USB 2.0)

Audio SiS 964 built-in audio + AC97 codec, SPDIF support;

2W+2W volume amplifier

Others 1394, ATX power connector

Mechanical and Environmental

Dimensions 170mm x 170mm

INTRODUCTION

Board Dimensions

4MB740 User’s Manual

INSTALLATIONS

MB740 User’s Manual 5

Installations

This section provides information on how to use the jumpers and

connectors on the MB740 in order to set up a workable system. The

topics covered are:

Installing the CPU........................................................................ 6

Installing the Memory.................................................................. 7

Setting the Jumpers...................................................................... 8

Connectors on MB740............................................................... 11

INSTALLATIONS

Installing the CPU

The MB740 board supports a Socket A processor socket for AMD NX

Series processors.

The Socket A processor socket comes with a lever to secure the

processor. Raise this lever to about a 90°angle to allow the insertion of

the processor. Place the processor into the socket by making sure the

notch on the corner of the CPU corresponds with the notch on the inside

of the socket. Once the processor has slide into the socket, return the

lever to the lock position. Refer to the figures below.

After you have installed the processor into the socket, check if the

jumpers for the CPU type and speed are correct.

NOTE: Ensure that the CPU heat sink and the CPU top surface are in

total contact to avoid CPU overheating problem that would

cause your system to hang or be unstable.

6MB740 User’s Manual

Table des matières

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur