AMD SD188ES Manuel utilisateur

1.1

SD188ES/SD188EM Demonstration Board User’s Manual vii

About the SD188ES/SD188EM

Demonstration Board

The AMD®SD188ES/SD188EM Demonstration Board is designed as an

exceptionally small, low-cost product for demonstration of the AMDAm188ES

and Am188EM microcontrollers. See page ix for a block diagram of the board.

The SD188ES/SD188EM demonstration board is a stand-alone evaluation

platform for the Am188ES or Am188EM microcontroller. The Am188ES and

Am188EM microcontrollers integrate peripherals such as 12 chip-select

controllers, serial controllers, 32 programmable I/Os, three timers, an interrupt

controller, and watchdog timer to increase system functionality while reducing

overall cost. The memory controller supports a glueless connection to SRAM,

EPROM, Flash memory, and pseudo-static RAM. The Am188ES and Am188EM

microcontrollers also feature an innovative bus design that frees the processor to

run at nearly twice the speed of standard 80C188 processors while using

commodity memory devices.

TheSD188ES/SD188EM demonstrationboardisdesigned witha 104-pinAm188

expansion interface that provides access to the Am188ES and Am188EM

microcontrollers signals. The Am188 expansion interface facilitates prototyping

with external devices by using the SD188ES/SD188EM demonstration board as

the minimal system core of a design.

The SD188ES/SD188EM demonstration board highlights the Am188ES and

Am188EM microcontrollers’ serial ports, glueless interface to SRAM and Flash

memory, and the expansion interface to peripheral attachments. A complete

description of the board can be found in Chapter 2, “Demonstration Board

Functional Description”.

frtbook : about1 Page vii Monday, June 2, 1997 3:37 PM

SD188ES/SD188EM Demonstration Board User’s Manual

viii

1.1

Theory of Operation

The SD188ES/SD188EM demonstration board demonstrates the basic processor

functionality and features of the Am188ES and Am188EM microcontrollers, and

the simplicity of their system design. As a stand-alone platform, the board enables

you to test the Am188ES and Am188EM microcontrollers’ performance and

functionality. The minimal number of components on the board exhibits the

integration present in the processor.

Demonstration Board Features

The SD188ES/SD188EM demonstration board provides the following features:

• Am188ES or Am188EM 40-MHz microcontroller

•E86

™

family boot monitor (E86MON) board-resident utility

Information on invoking and using the E86MON software is provided in the

E86MONTM Software User’s Manual included in your kit.

• 128 Kbyte SRAM

• 128 Kbyte Am29F010-70 Flash memory

• Am188 104-pin expansion interface

• Two RS-232 serial ports with DB-9 connectors

Please note that the Am188EM microcontroller provides one asynchronous

serial port. Thus, when the board is populated with the Am188EM

microcontroller, only one serial port is featured.

• Activity LED indicators for PIO signals

• Power-on LED indicator

• Reset circuitry

frtbook : about1 Page viii Monday, June 2, 1997 3:37 PM

SD188ES/SD188EM Demonstration Board User’s Manual ix

1.1

Figure 0-1. SD188ES/SD188EM Demonstration Board Block Diagram

Address Bus

A/D Bus

Control

Am188ES or Am188EM

Microcontroller

CPU

Clock &

Reset

Circuitry

Power

& Ground

5.5-mm

Barrel

Connector

Am29F010-70

Flash Bank

(128 Kbyte)

SRAM Bank

(128 Kbyte)

Am188

Expansion

Interface

RS-232 Serial Port

Level Converter

Circuitry DB-9

Connector

RS-232 Serial Port

Level Converter

Circuitry*

DB-9

Connector*

*Second asynchronous serial port implemented only

with Am188ES microcontroller

frtbook : about1 Page ix Monday, June 2, 1997 3:37 PM

SD188ES/SD188EM Demonstration Board User’s Manual

1.1

SD188ES/SD188EM Demonstration Board

Documentation

The SD188ES/SD188EM Demonstration Board User’s Manual provides

informationon thedesign andfunctionof the SD188ES/SD188EMdemonstration

board. Detailed instructions for using the E86MON software are provided in the

E86MONTMSoftwareUser’sManualincludedinyourkit.Thedemonstrationboard

is shipped with the E86MON software installed in the on-board Flash memory.

About This Manual

Chapter 1, “Quick Start” provides implementation and installation information for

the demonstration board and instructions for invoking the E86MON software.

DetailedinformationonusingtheE86MONsoftwareisprovidedintheE86MONTM

Software User’s Manual included in your kit.

Chapter 2, “Demonstration Board Functional Description” contains descriptions

of the basic sections of thedemonstration board: layout, processor, Flash memory,

SRAM, serial ports, power and signal LED indicators, clock and reset logic,

expansion interface, and power-supply circuitry.

Chapter3,“ProductSupport”providesinformationonreachingandusingtheAMD

Corporate Applications technical support services, product information available

throughAMD’sWorldWideWebandFTPsites,andsupporttoolsfortheembedded

E86 family.

AppendixA,“LayoutDiagram,Schematics,andBoardBillof Materials”contains

a board layout drawing along with schematics and a Bill of Materials (BOM) for

the SD188ES/SD188EM demonstration board.

frtbook : about1 Page x Monday, June 2, 1997 3:37 PM

SD188ES/SD188EM Demonstration Board User’s Manual xi

1.1

Suggested Reference Material

For information on ordering the literature listed below, see Chapter 3, “Product

Support”.

•Am186ES and Am188ES Microcontrollers Data Sheet

Advanced Micro Devices, order number 20002

•Am186EM and Am188EM Microcontrollers Data Sheet

Advanced Micro Devices, order number 19168

•Am186EM and Am188EM Microcontrollers User’s Manual

Advanced Micro Devices, order number 19713

•Am186ES and Am188ES Microcontrollers User’s Manual

Advanced Micro Devices, order number 21096

•Am186and Am188Family Instruction Set Manual

Advanced Micro Devices, order number 21267

•FusionE86SM Catalog

Advanced Micro Devices, order number 19255

• For current application notes and technical bulletins, see our World Wide Web

page at http://www.amd.com.

frtbook : about1 Page xi Monday, June 2, 1997 3:37 PM

SD188ES/SD188EM Demonstration Board User’s Manual

xii

1.1

Documentation Conventions

The Advanced Micro Devices SD188ES/SD188EM Demonstration Board User’s

Manual uses the conventions shown in Table 0-1 (unless otherwise noted). These

same conventions are used in all E86 family support product manuals.

Table 0-1. Notational Conventions

Symbol Usage

Boldface Indicates that characters must be entered

exactly as shown, except that the alphabetic case is

only significant when indicated.

Typewriter face Indicatescomputertextinputoroutputinanexample

or listing.

frtbook : about1 Page xii Monday, June 2, 1997 3:37 PM

1.1

SD188ES/SD188EM Demonstration Board User’s Manual 1-1

Chapter 1

Quick Start

This chapter provides information that will help you quickly set up and start using

the SD188ES/SD188EM demonstration board.

The SD188ES/SD188EM demonstration board is supported by the E86MON

software. The E86MON software enables you to load, run, and debug programs

on the SD188ES/SD188EM demonstration board. For detailed information on

using the E86MON software, refer to the E86MONTM Software User’s Manual

included in your kit.

For information on how to:

• Connect the SD188ES/SD188EM demonstration board to a PC, see page 1-2

• Invoke the E86MON software, see page 1-4

• Troubleshoot installation problems, see page 1-5

• Locate related sources of information, see page 1-6

frtbook : ch1 Page 1 Monday, June 2, 1997 3:37 PM

SD188ES/SD188EM Demonstration Board User’s Manual

1-2

1.1

Connecting to a PC

Follow the steps below to connect the SD188ES/SD188EM demonstration board

to your PC.

Installation Requirements

The items listed below are necessary to install and run the SD188ES/SD188EM

demonstration board:

• PC with an available COM port

• Terminal emulation software (such as Microsoft Windows®Terminal or

ProComm Plus) that supports ASCII file transfers, software flow control (Xon/

Xoff), and send break capability

• Power source for universal power supply

Board Installation

1. Removetheboardfromtheshippingcarton.Visuallyinspecttheboardtoverify

that it was not damaged during shipment.

!CAUTION: As with all computer equipment, the

SD188ES/SD188EM demonstration board may be

damaged by electrostatic discharge (ESD). Please take

proper ESD precautions when handling any board.

frtbook : ch1 Page 2 Monday, June 2, 1997 3:37 PM

SD188ES/SD188EM Demonstration Board User’s Manual 1-3

1.1

2. Connect the demonstration board’s DB-9 serial port (either P1 or P0 on the ES

version of the board; P1 on the EM version of the board) to an available COM

port. Use the serial cable included in the SD188ES/SD188EM demonstration

board kit and note that a DB-9 to DB-25 serial connector adapter is provided

if your host system requires it. The pinout of the demonstration board’s serial

connector is shown on page 2-9.

3. Connect the power supply to the barrel connectoron the SD188ES/SD188EM

demonstration board.

4. Applypowertotheboardbyconnectingthepowersupplytoanelectricaloutlet.

Once the board is powered up, the LEDs (CR3-CR10) should flash in an

oscillating pattern.

COM1

COM2

serial

cable

!DANGER:Makesurethepowersupplyisnotpluggedinto

an electrical outlet before connecting it to the SD188ES/

SD188EM demonstration board

!CAUTION: If using your own power supply, ensure that

it is a 5-V supply with the proper polarity (see page 2-14).

Using a 9-V supply will permanently damage the board.

frtbook : ch1 Page 3 Monday, June 2, 1997 3:37 PM

SD188ES/SD188EM Demonstration Board User’s Manual

1-4

1.1

5. Invoke the terminal emulation program at 19200 baud, no parity, 8 data bits, and 1

stop bit; enable the software flow control (Xon/Xoff), if supported.

6. Reset the board by depressing and releasing the RESET switch (see location in

Figure 2-1 on page 2-3). The LEDs on the board (CR3-CR10) will again flash in

an oscillating pattern for three seconds, as they did upon power up.

During the three-second period while the LEDs are oscillating, type an ain the

terminal window to ensure that the E86MON software uses the correct baud rate.

When the E86MON software receives an a, it adjusts its baud rate (if necessary)

and displays the welcome message and prompt.

If you type a character other than an a, or type no character at all, the E86MON

software still displays the welcome message and prompt, but may be using an

incorrect baud rate. Depressing and releasing the RESET switch gives you another

opportunity to type an a.

7. To display the version of the E86MON software and the commands available, type

?and press Enter.

For detailed information on using the E86MON software, refer to the E86MONTM

Software User’s Manual included in your manual.

frtbook : ch1 Page 4 Monday, June 2, 1997 3:37 PM

Ce manuel convient aux modèles suivants

Table des matières

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur