Altronix Trove Series Manuel utilisateur

Trove1V1R

- Trove rack enclosure with

Altronix/HID VertX®backplane (TV1R)

Access & Power Integration

Rev. TVR112818

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

More than just power.TM

Installation Guide

All registered trademarks are property of their respective owners.

- 2 - Trove1V1R Installation Guide

Overview:

Altronix Trove1V1R rack mount access & power integration solution accommodates various combinations of

HID VertX®boards with or without Altronix power supplies and accessories for access systems.

Specifications:

Agency Listings:

• CE European Conformity.

Trove1V1R

Trove1R rack mount enclosure with TVR Altronix/HID VertX®backplane.

• 16 Gauge black enclosure with ample knockouts for convenient access.

• Modular 2U standard EIA 19” drawer with extendable slides up to 48”.

• Dimensions (H x W x D): 3.375” x 19.0” x 26.5” (85.8mm x 482.6mm x 673.1mm).

• Includes tamper switch (Altronix Model TS112 or equivalent) and cam lock.

TV1R

Altronix/HID VertX®backplane.

• 16 Gauge backplane.

• Dimensions (H x W x D): 18.5” x 15.25” x 0.3125” (469.9mm x 387.4mm x 7.9mm).

Optional Accessories:

• RE2: Rack Mount Battery Enclosure accommodates up to four (4) 12VDC/7AH batteries

• WM5, WM25, WM100: Magnetic Cable Tie Mounts (5, 25, 100 counts).

• LC3: 6 ft. three-wire line cord.

Backplane Accommodates a Combination of the Following:

Altronix:

• Up to two (2) eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB, ACMS8(CB) or ACM8(CB).

• Up to three (3) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), or VR6.

HID VertX®:

• Up to six (6) V100, V200, V300, V1000 or V2000.

Hardware and Accessories:

Spacer | 7/8” Pan Head Screw | Lock Nut

Trove1V1R Installation Guide - 3 -

Installing Trove1R into Rack Tower:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local

codes and authorities having jurisdiction. These products are for indoor use only and must be installed within

the protected premises.

Note: First assemble and Install Z Bracket Wire Management Accesory

(refer to Z Bracket Installation pg. 4)

1. Remove backplane from enclosure prior to installing into rack cabinet

(do not discard hardware).

2. In order to mount included UL Listed tamper switch (Altronix Model TS112 or

equivalent) turn the enclosure upside down. Punch out the knockout in

designated location, on the back of the unit, from outside of the drawer

(Fig. 1, pg. 3). Insert the tamper switch into the knockout from outside of the

drawer with the button facing outwards and spaded connectors inside the drawer.

Connect tamper switch wiring to the Access Control Panel input or the

appropriate UL Listed reporting device.

To activate alarm signal open the rack drawer.

3. Slide the rack enclosure into an open 2U location in the four post rack cabinet.

4. Utilizing proper fasteners attach front ears to the rack rails.

5. Attach the rear of the adjustable slides to the rear rails of the rack cabinet with the proper fasteners.

6. Secure the rack cover (Fig. 2a, pg. 3) and rack drawer to earth ground (Fig. 2b, pg. 3).

7. Make sure that all internal cofigurations (wiring, voltage selection, switch settings, etc.) are complete before

mounting backplane back into enclosure.

8. After all components are mounted on the backplane, attach it to the enclosure using included hardware.

Fig. 1

Back of the drawer,

viewed from outside.

Tamper Switch

mounting location

Fig. 2

Fig. 2a

Fig. 2b

- 4 - Trove1V1R Installation Guide

Assembling and Attaching

Z Bracket Wire Management Accessory (included):

Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory.

Hardware (included):

Ten (10) bolts and eight (8) lock nuts.

1. Carefully unpack Z Bracket. Do not discard hardware

(included) (Fig. 3, pg. 4).

2. Attach arms to each other using bolts and

lock nuts (Fig. 3a, pg. 4).

3. Attach the hinge brackets to the ends of

arms using bolts and nuts positioning

them as shown on (Fig. 3b, pg. 4).

4. Make sure that all nuts are tightened.

5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable slide using bolts and lock nuts

(included) (Fig. 4, 4a, pg. 4).

6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts

(included).

Fig. 4

Fig. 4a

Fig. 3b

Two (2)

Fig. 3

Fig. 3a

Trove1V1R Installation Guide - 5 -

TV1R:

Configuration of Altronix Power Supply and/or Sub-Assembly Boards

1. Fasten spacers onto metal pems configuration (A) or (B) of backplane depending on the board (Fig. 5, pg. 5).

2. Position access controller module over corresponding spacers and fasten screws into spacers (Fig. 5a, pg. 5).

3. Mount backplane to enclosure with hardware.

Position Chart for the Following Models:

Altronix Power Supply/Charger or Sub-Assembly Pem Mounting

eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB, or ACM8(CB), ACMS8(CB) A

ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), PD16W(CB) or VR6 B

Fig. 5

Metal

Spacer

Placement

for Altronix

Power

Supplies

Metal

Spacer

Placement

for Altronix

Power

Supplies

Pem

Spacer

Backplane

Power Supply

Sub-Assembly

Pan Head Screw

Fig. 5a

- 6 - Trove1V1R Installation Guide

TV1R:

Configuration of HID VertX®Boards

1. Fasten spacers onto metal pems configuration (A) of backplane (Fig. 6, pg. 6).

2. Position access controller module over corresponding spacers and fasten screws into spacers (Fig. 6a, pg. 6).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

HID VertX®Sub-Assembly Pem Mounting

V100, V200, V300, V1000, V2000 A

Fig. 6

Pem

Spacer

Backplane

Pan Head Screw

HID VertX®

Board

Fig. 6a

Trove1V1R Installation Guide - 7 -

Notes:

- 8 - Trove1V1R Installation Guide

Trove1R Enclosure Dimensions:

3.375” x 19.0” x 26.5” (85.8mm x 482.6mm x 673.1mm). Shown with Z Bracket attached.

0.1”

2.5mm

1.5”

38.1mm

11.175” (283.8mm)

Tamper

Switch

3/4” Conduit

1” Conduit

Conduit

3/4”

1/2”

2.4”

61mm

4.57”

116.1mm

3.375”

85.8mm

26.5”

673.1mm

19” (482.6mm)

R 1.27” (32.3mm)

1” (25.4mm)

0.55” (14mm)

3.62”

92mm

Altronix is not responsible for any typographical errors.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

website: www.altronix.com | e-mail: [email protected]

IITrove1V1R D09V MEMBER

Autres manuels pour Trove Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Altronix Enceinte

Altronix

Altronix Trove1BL1R Manuel utilisateur

Altronix

Altronix THN2 Manuel utilisateur

Altronix

Altronix Trove T3MK75F16 Manuel utilisateur

Altronix

Altronix Trove T1RSH3F8 Manuel utilisateur

Altronix

Altronix Trove 1AL1R Manuel utilisateur

Altronix

Altronix Trove T1RAL13F8P8 Manuel utilisateur

Altronix

Altronix TROVE Trove3WC Series Manuel utilisateur

Altronix

Altronix trove1m1 Manuel utilisateur

Altronix

Altronix Trove1HW1R Manuel utilisateur

Altronix

Altronix Trove Series Manuel utilisateur

Altronix

Altronix Trove1M1R Manuel utilisateur

Altronix

Altronix TROVE TDMD2 Manuel utilisateur

Altronix

Altronix Trove2AG2 Manuel utilisateur

Altronix

Altronix TSL2 Manuel utilisateur

Altronix

Altronix TROVE T1MK1F4 Manuel utilisateur

Altronix

Altronix Trove2M2 Instructions d'utilisation et d'entretien

Altronix

Altronix TROVE T2PXK7F8DV Manuel utilisateur

Altronix

Altronix Trove2KA2 Manuel utilisateur

Altronix

Altronix Trove1M1R Manuel utilisateur

Altronix

Altronix TROVE T2MK3F4D Manuel utilisateur

Altronix

Altronix RE2 Manuel utilisateur

Altronix

Altronix RE2 Manuel utilisateur

Altronix

Altronix TROVE T2PXK7F8V Manuel utilisateur

Altronix

Altronix Trove1V1R Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur