Altronix Trove1HW1R Manuel utilisateur

Trove1HW1R

- Trove rack enclosure with

Altronix/Honeywell backplane (THW1R)

Access & Power Integration

Rev. THWR031119 More than just power.TM

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

Installation Guide

All registered trademarks are property of their respective owners.

- 2 - Trove1HWR Installation Guide

Overview:

Altronix Trove1HW1R rack mount access & power integration solution accommodates various combinations of

Honeywell boards with or without Altronix power supplies and accessories for access systems.

Specifications:

Agency Listings:

• CE European Conformity.

Trove1HW1R

Trove1R rack mount enclosure with THW1R Altronix/Honeywell backplane.

• 16 Gauge black enclosure with ample knockouts for convenient access.

• Modular 2U standard EIA 19” drawer with extendable slides up to 48”.

• Dimensions (H x W x D): 3.375” x 19.0” x 26.5” (85.8mm x 482.6mm x 673.1mm).

• Includes tamper switch (Altronix Model TS112 or equivalent) and cam lock.

THW1R

Altronix/Honeywell backplane.

• 16 Gauge backplane.

• Dimensions (H x W x D): 18.5” x 15.25” x 0.3125” (469.9mm x 387.4mm x 7.9mm).

Optional Accessories:

• RE2: Rack Mount Battery Enclosure accommodates up to four (4) 12VDC/7AH batteries

• WM5, WM25, WM100: Magnetic Cable Tie Mounts (5, 25, 100 counts).

• LC3: 6 ft. three-wire line cord.

Backplane Accommodates a Combination of the Following:

Altronix:

• One (1) eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB, ACMS8(CB) or ACM8(CB).

• Up to two (2) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), or VR6.

Honeywell:

• Up to four (4) PRO32E1PS, PRO32IC, PRO32R2, PRO32IN, PRO32OUT, PW6K2E2PS, PW6K1IC, PW6K1IN,

PW6K1OUT, PW6K1R2.

• One (1) PRO32E1PS or PW6K2E2PS.

Hardware and Accessories:

Spacer | 5/16” Pan Head Screw | Lock Nut

Trove1HW1R Installation Guide - 3 -

Installing Trove1R into Rack Tower:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local

codes and authorities having jurisdiction. These products are for indoor use only and must be installed within

the protected premises.

Note: First assemble and Install Z Bracket Wire Management Accesory

(refer to Z Bracket Installation pg. 4)

1. Remove backplane from enclosure prior to installing into rack cabinet

(do not discard hardware).

2. In order to mount included UL Listed tamper switch (Altronix Model TS112 or

equivalent) turn the enclosure upside down. Punch out the knockout in

designated location, on the back of the unit, from outside of the drawer

(Fig. 1, pg. 3). Insert the tamper switch into the knockout from outside of the

drawer with the button facing outwards and spaded connectors inside the drawer.

Connect tamper switch wiring to the Access Control Panel input or the

appropriate UL Listed reporting device.

To activate alarm signal open the rack drawer.

3. Slide the rack enclosure into an open 2U location in the four post rack cabinet.

4. Utilizing proper fasteners attach front ears to the rack rails.

5. Attach the rear of the adjustable slides to the rear rails of the rack cabinet with the proper fasteners.

6. Secure the rack cover (Fig. 2a, pg. 3) and rack drawer to earth ground (Fig. 2b, pg. 3).

7. Make sure that all internal cofigurations (wiring, voltage selection, switch settings, etc.) are complete before

mounting backplane back into enclosure.

8. After all components are mounted on the backplane, attach it to the enclosure using included hardware.

Fig. 1

Back of the drawer,

viewed from outside.

Tamper Switch

mounting location

Fig. 2

Fig. 2a

Fig. 2b

- 4 - Trove1HWR Installation Guide

Assembling and Attaching

Z Bracket Wire Management Accessory (included):

Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory.

Hardware (included):

Ten (10) bolts and eight (8) lock nuts.

1. Carefully unpack Z Bracket. Do not discard hardware

(included) (Fig. 3, pg. 4).

2. Attach arms to each other using bolts and

lock nuts (Fig. 3a, pg. 4).

3. Attach the hinge brackets to the ends of

arms using bolts and nuts positioning

them as shown on (Fig. 3b, pg. 4).

4. Make sure that all nuts are tightened.

5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable slide using bolts and lock nuts

(included) (Fig. 4, 4a, pg. 4).

6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts

(included).

Fig. 4

Fig. 4a

Fig. 3b

Two (2)

Fig. 3

Fig. 3a

Trove1HW1R Installation Guide - 5 -

THW1R:

Configuration of Altronix Power Supply and/or Sub-Assembly Boards

1. Fasten spacers onto metal pems configuration (A) or (B) of backplane depending on the board (Fig. 5, pg. 5).

2. Position access controller module over corresponding spacers and fasten screws into spacers (Fig. 5a, pg. 5).

3. Mount backplane to enclosure with hardware.

Position Chart for the Following Models:

Altronix Power Supply/Charger or Sub-Assembly Pem Mounting

eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB, or ACM8(CB), ACMS8(CB) A

ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), PD16W(CB) or VR6 B

Fig. 5

Metal

Spacer

Placement

for Altronix

Power

Supplies

Pem

Spacer

Backplane

Power Supply

Sub-Assembly

Pan Head Screw

Fig. 5a

- 6 - Trove1HWR Installation Guide

Installation Instructions for

Honeywell PRO32E1PS or PW6K2E2PS to THW1R:

1. Install four (4) mounting screws approximately halfway into mounting holes in the power supply’s frame.

2. Position the power supply over four (4) keyholes (B) on THW1R.

3. Slide the power supply forward until secure. Tighten the mounting screws.

Installation Instructions for

Honeywell Access Controllers to THW1R:

1. Fasten spacers (provided) into pem configuration (A) of backplane (Fig. 6, pg. 6).

2. Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 6a, pg. 6).

3. Mount backplane to enclosure with hardware.

Honeywell ProWatch/WinPak Power Supply or Access Controller

Position Chart for the Following Models:

Honeywell Board Pem Mounting

3200 Series or WIN-PAK Series A

PRO32E1PS or PW6K2E2PS B

Fig. 6

A A

Pem

Spacer

Backplane

Pan Head Screw

Honeywell

Board

Fig. 6a

Trove1HW1R Installation Guide - 7 -

THW1R Backplane Dimensions (H x W x D):

18.5” x 15.25” x 0.3125” (469.9mm x 387.4mm x 7.9mm)

15.25” (387.4mm)

18.5” (469.9mm)

- 8 - Trove1HWR Installation Guide

Trove1R Enclosure Dimensions:

3.375” x 19.0” x 26.5” (85.8mm x 482.6mm x 673.1mm). Shown with Z Bracket attached.

0.1”

2.5mm

1.5”

38.1mm

11.175” (283.8mm)

2.4”

61mm

4.57”

116.1mm

3.375”

85.8mm

26.5”

673.1mm

19” (482.6mm)

R 1.27” (32.3mm)

1” (25.4mm)

0.55” (14mm)

3.62”

92mm

Altronix is not responsible for any typographical errors.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty

IITrove1HW1R I01U MEMBER

Table des matières

Autres manuels Altronix Enceinte

Altronix

Altronix Trove1HW1R Manuel utilisateur

Altronix

Altronix Trove Trove2KA2 Manuel utilisateur

Altronix

Altronix Trove2BL2 Manuel utilisateur

Altronix

Altronix TSL2 Manuel utilisateur

Altronix

Altronix TROVE Trove2KS2 Manuel utilisateur

Altronix

Altronix Trove 1AL1R Manuel utilisateur

Altronix

Altronix TROVE T1MK1F4 Manuel utilisateur

Altronix

Altronix TROVE Trove3WC Series Manuel utilisateur

Altronix

Altronix Trove Series Manuel utilisateur

Altronix

Altronix TROVE T2MK3F4D Manuel utilisateur

Altronix

Altronix Trove1BL1R Manuel utilisateur

Altronix

Altronix Trove2M2R Manuel utilisateur

Altronix

Altronix TROVE Trove1PD1 Manuel utilisateur

Altronix

Altronix Trove T1PDK7F24 Manuel utilisateur

Altronix

Altronix RE2 Manuel utilisateur

Altronix

Altronix Trove2DM2 Manuel utilisateur

Altronix

Altronix Trove Series Manuel utilisateur

Altronix

Altronix TROVE T1RAG3F8 Manuel utilisateur

Altronix

Altronix Trove1V1R Manuel utilisateur

Altronix

Altronix THN2 Manuel utilisateur

Altronix

Altronix Trove T2KSK3F8 Manuel utilisateur

Altronix

Altronix Trove2M2 Instructions d'utilisation et d'entretien

Altronix

Altronix Trove1V1R Manuel utilisateur

Altronix

Altronix TROVE T3MK75F16 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur