Agilent Technologies E5080 Series Manuel utilisateur

Agilent Technologies

Agilent 

E5080 Series Cryogen

Monitor with Pressure

Control

User Guide

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from

Agilent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

9100382900

Edition

Revision A, April 2012

Printed in USA

Agilent Technologies, Inc.

5301 Stevens Creek Boulevard 

Santa Clara, CA 95051 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S. Gov-

ernment will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Govern-

ment users will receive no greater than

Limited Rights as defined in FAR 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and met.

E5080 Series Cryogen Monitor User Guide 1

Contents

1 Introduction

Safety 4

Compliance Notice 5

Important Notice 6

Disclaimer 6

Contact Information 7

Europe 7

USA 7

Agilent website (all countries) 7

2 Operation

Description and Specifications 10

E5084 - pressure regulation for twin cryogen magnets 10

E5083 - pressure regulation for refrigerated magnets 11

Technical specification 13

Operation 14

Overview 14

Connecting the E5080 to a magnet system 15

Using the Menu System 16

Troubleshooting 18

Problems that occur on E5084 and E5083 units 18

Problems that occur on E5084 unit only 19

Problems that occur on E5083 unit only 20

Helium probe hardware errors 22

Thermal sensor hardware errors 22

Gas Heater hardware error 22

Settings for Hyperterminal 23

To make advanced settings 24

To make serial cable pin connections 25

Using Hyperterminal to upload logged data 26

Command Instruction Set 27

General commands 27

Helium commands 28

Thermal channel commands 29

Pressure commands 30

Gas flow (E5084 only) 30

Gas heater (E5083 only) 30

2 E5080 Series Cryogen Monitor User Guide

Request command 31

Connector Pin Assignments 32

Agilent E5080 Series Cryogen Monitor with Pressure Control

User Guide

Agilent Technologies

Introduction

Safety 4

Compliance Notice 5

Important Notice 6

Contact Information 7

4 E5080 Series Cryogen Monitor User Guide

1Introduction

Safety

Clean the equipment case and front panel with a

non- abrasive non- water based cleaner.

Store or install the equipment within the following

environmental conditions:

The unit contains an internal lithium battery that should not

be removed or changed other than by Agilent personnel.

There are no consumable parts associated with the

instrument nor is there any preventative inspection or

maintenance associated with the operation of the

instrument.

There are no user maintainable parts within the instrument.

Should the unit require repair, return it to Agilent

Technolgies; see “Contact Information” on page 7.

Do not move the equipment after installation and connection

to a magnet.

WARNING

Isolate or disconnect from mains supply before opening this unit for any

reason. LIVE PARTS INSIDE.

WARNING

This equipment must be connected to an earthed mains supply. For

continued protection against risk of fire or electric shock, replace

fuses with the same type, rating and UL listing.

CAUTION

This equipment is not suitable for, and must not be used in areas

with flammable mixtures.

Ambient temperature range 5oC to 40oC

Relative humidity range 30% to 95% non- condensing

Atmospheric pressure :700 hPA to 1060 hPA

Introduction 1

E5080 Series Cryogen Monitor User Guide 5

Compliance Notice

Marking by the symbol indicates compliance of this

device to the EMC (electromagnetic compatibility) and LV

(low voltage) directives of the European Community. This

unit is to be installed and operated as detailed. Any

modification or maintenance procedure undertaken which is

not approved by Agilent Technologies UK Ltd could nullify

the marking of this product and lead to prosecution. A

'Declaration Of Conformity' in accordance with the above

directive has been made and is located at Agilent

Technologies, Yarnton, Oxfordshire, UK.

6 E5080 Series Cryogen Monitor User Guide

1Introduction

Important Notice

Inspect goods immediately on arrival for possible transit

damage, and notify Agilent Technologies within three days of

receipt of goods. Failure to do this invalidates any possible

claim.

Disclaimer

Every precaution has been taken in the preparation of this

publication. Agilent Technologies assumes no responsibility

for errors or omissions. Neither is any liability assumed for

damages resulting from the use of the information contained

herein.

Introduction 1

E5080 Series Cryogen Monitor User Guide 7

Contact Information

Europe

Address:

Agilent Technologies UK Ltd.

6 Mead Road

Oxford Industrial Estate

Yarnton, Oxfordshire OX5 1QU

Telephone Numbers:

To find contact information for your country, click the

following link, select your country, and then click Go.

http://www.chem.agilent.com/en- us/ContactUS/Pages/Contact

Us.aspx

USA

Address:

Agilent Technologies, Inc.

5301 Stevens Creek Blvd.

Santa Clara, CA 95051

Telephone Numbers:

Toll Free: +1 (800) 227 9770

Agilent website (all countries)

To find contact information for your country, click the

following link, select your country, and then click Go.

http://www.chem.agilent.com/en- us/ContactUS/Pages/Contact

Us.aspx

8 E5080 Series Cryogen Monitor User Guide

1Introduction

Table des matières

Autres manuels Agilent Technologies Instrument de mesure

Agilent Technologies

Agilent Technologies ENA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies Agilent 4396B Manuel utilisateur

Agilent Technologies

Agilent Technologies B1542A Manuel utilisateur

Agilent Technologies

Agilent Technologies 16962A Manuel utilisateur

Agilent Technologies

Agilent Technologies X Series Manuel utilisateur

Agilent Technologies

Agilent Technologies E1420B Manuel utilisateur

Agilent Technologies

Agilent Technologies 4285A Manuel utilisateur

Agilent Technologies

Agilent Technologies N9010A Manuel utilisateur

Agilent Technologies

Agilent Technologies 16712A Guide de référence

Agilent Technologies

Agilent Technologies N5225-60114 Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies E4417A Manuel utilisateur

Agilent Technologies

Agilent Technologies FieldFox N9923AN Manuel utilisateur

Agilent Technologies

Agilent Technologies ESA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies E4991A Manuel utilisateur

Agilent Technologies

Agilent Technologies 6890 Series Mode d’emploi

Agilent Technologies

Agilent Technologies 4263B Manuel utilisateur

Agilent Technologies

Agilent Technologies X Series Guide de l'utilisateur

Agilent Technologies

Agilent Technologies U1731A Manuel utilisateur

Agilent Technologies

Agilent Technologies N4962A Manuel utilisateur

Agilent Technologies

Agilent Technologies 4284A Manuel utilisateur

Agilent Technologies

Agilent Technologies FieldFox N9913A Manuel utilisateur

Agilent Technologies

Agilent Technologies 3200P Manuel utilisateur

Agilent Technologies

Agilent Technologies U1211A Manuel utilisateur

Agilent Technologies

Agilent Technologies E8361C Guide de démarrage rapide

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur