Agilent Technologies 8712ET Manuel utilisateur

Option 100 Fault Location and Structural

Return Loss Measurements

Agilent Technologies 8712ET/ES and 8714ET/ES

RF Network Analyzers

User’s Guide Supplement

Part No. 08714-90020

Printed in USA

Print Date: June 2000

Supersedes: October 1999

Notice

The information contained in this document is subject to change without

notice. Agilent Technologies makes no warranty of any kind with regard

tothis material, including but not limited to, the implied warranties of

merchantability and ﬁtness for a particular purpose. Agilent

Technologies shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the furnishing,

performance, or use of this material.

Safety Information

Refer to your analyzer’s User’s Guide for safety, warranty, and assistance

information.

Key Conventions

This manual uses the following conventions:

: This represents a key physically located on the

analyzer (a “hardkey”).

: This indicates a “softkey”—a key whose label is determined

by the instrument’s ﬁrmware, and is displayed on the right side of the

instrument’s screen next to the eight unlabeled keys.

FRONT PANEL KEY

Softkey

iii

Agilent Technologies Sales & Service Ofﬁces

UNITED STATES

Instrument Support Center

Agilent Technologies

(800) 403-0801

EUROPEAN FIELD OPERATIONS

Headquarters

Agilent Technologies S.A.

150, Route du Nant-d’Avril

1217 Meyrin 2/ Geneva

Switzerland

(41 22) 780.8111

France

Agilent Technologies France

1 Avenue Du Canada

Zone D’Activite De Courtaboeuf

F-91947 Les Ulis Cedex

France

(33 1) 69 82 60 60

Germany

Agilent Technologies GmbH

Agilent Technologies Strasse

61352 Bad Homburg v.d.H

Germany

(49 6172) 16-0

Great Britain

Agilent Technologies

Eskdale Road, Winnersh

Triangle Wokingham,

Berkshire RG41 5DZ

England

(44 118) 9696622

INTERCON FIELD OPERATIONS

Headquarters

Agilent Technologies

3495 Deer Creek Rd.

Palo Alto, CA 94304-1316

USA

(650) 857-5027

Japan

Agilent Technologies Japan, Ltd.

Measurement Assistance Center

9-1, Takakura-Cho, Hachioji-Shi

Tokyo 192-8510, Japan

TEL (81) -426-60-2111

FAX (81) -426-56-7840

Australia

Agilent Technologies Australia Ltd.

31-41 Joseph Street

Blackburn, Victoria 3130

(61 3) 895-2895

Singapore

Agilent Technologies Singapore (Pte.)

Ltd.

150 Beach Road

#29-00 Gateway West

Singapore 0718

(65) 291-9088

Canada

Agilent Technologies (Canada)

Ltd.

17500 South Service Road

Trans-Canada Highway

Kirkland, Quebec H9J 2X8

Canada

(514) 697-4232

Taiwan

Agilent Technologies Taiwan

8th Floor, H-P Building

337 Fu Hsing North Road

Taipei, Taiwan

(886 2) 712-0404

China

China Agilent Technologies

38 Bei San Huan X1 Road

Shuang Yu Shu

Hai Dian District

Beijing, China

(86 1) 256-6888

Book Overview

This book documents the use of Option 100 (fault location and structural

return loss (SRL) measurement capability) with the following network

analyzers:

• Agilent Technologies 8712ET/ES

• Agilent Technologies 8714ET/ES

Fault location and SRL measurements can help you test and

troubleshoot 50 ohm or 75 ohm transmission lines. Both fault location

and SRL measurements are used to identify damaged cables.

Fault location is best used to identify single faults greater than −40 dB.

SRL measurements are typically made before a cable has been installed

and are best used to identify many small evenly-spaced imperfections

that may be too small for a fault location measurement to detect.

The following illustration depicts a cable being measured simultaneously

in fault location and SRL modes. The upper display shows a fault

location measurement in the distance domain. The bottom display shows

a structural return loss measurement.

Agilent 8712ET/ES and 8714ET/ES

Network Analyzer

Documentation Map

The CDROM provides the contents of all of the documents

listed below.

The User’s Guide shows how to make measurements,

explains commonly-used features, and tells you how to get

the most performance from the analyzer.

The LAN Interface User’s Guide Supplement shows

how to use a local area network (LAN) for programming and

remote operation of the analyzer.

The Automating Measurements User’s Guide

Supplement provides information on how to conﬁgure and

control test systems for automation of test processes.

The Programmer’s Guide provides programming

information including GPIB and SCPI command references,

as well as short programming examples.

The Example Programs Guide provides a tutorial

introduction using BASIC programming examples to

demonstrate the remote operation of the analyzer.

The Service Guide provides the information needed to

adjust, troubleshoot, repair, and verify analyzer conformance

to published speciﬁcations.

The HP Instrument BASIC User’s Handbook describes

programming and interfacing techniques using

HP Instrument BASIC, and includes a language reference.

The HP Instrument BASIC User’s Handbook

Supplement shows how to use HP Instrument BASIC to

program the analyzer.

The Option 100 Fault Location and Structural Return

Loss Measurements User’s Guide Supplement provides

theory and measurement examples for making fault location

and SRL measurements. (Shipped only with Option 100

analyzers.)

The CATV Quick Start Guide provides abbreviated

instructions for testing the quality of coaxial cables.

(Shipped only with Option 100 analyzers.)

The Cellular Antenna Quick Start Guide provides

abbreviated instructions for verifying the performance of

cellular antenna systems. (Shipped only with Option 100

analyzers.)

Contents

vii

1. Introduction and Measurement Theory

Fault Location Measurement Theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

How the Analyzer Converts Frequency Data to Distance Data . . . . . . . . . . . . . . . . 1-4

Start/Stop Distance and Frequency Span Explanation . . . . . . . . . . . . . . . . . . . . . . . 1-5

Cable Impedance and Structural Return Loss Measurement Theory . . . . . . . . . . . . . 1-6

Cable Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

SRL and Periodic Cable Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

SRL and Discrete Cable Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

Techniques for Removing Connector Effects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

Measurement Uncertainties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18

2. Cable Preparation

Cable Preparation Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Bent Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Deformed Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Contaminated Dielectric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Damaged Outer Conductor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Non-Flush Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

Recommended Tools and Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Recommended Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Recommended Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

3. Making Fault Location Measurements

How to Make and Interpret Fault Location Measurements . . . . . . . . . . . . . . . . . . . . . 3-3

1. Select Fault Location as the Type of Measurement . . . . . . . . . . . . . . . . . . . . . . . . 3-4

2. Enter the Measurement Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

3. Calibrate the Analyzer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

4. Connect the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

5. Interpret the Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Example Fault Location Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Example 1: Identify Mismatches Expressed as Return Loss. . . . . . . . . . . . . . . . . . 3-14

Example 2: Identify Mismatches as the Magnitude of Reﬂection Coefﬁcient. . . . . 3-16

Example 3: Identify Mismatches at Greater Distances . . . . . . . . . . . . . . . . . . . . . . 3-17

4. Making SRL Measurements

How to Make and Interpret SRL Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

viii

Contents

1. Select SRL as the Type of Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

2. Calibrate the Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

3. Connect the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8

4. Determine the Connector Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8

5. Perform the SRL Cable Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16

6. Interpret the SRL Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-19

5. Making Simultaneous Fault Location and SRL Measurements

How to Make Simultaneous Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4

6. Making Impedance Measurements

How to Make Impedance Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-4

7. Characterizing and Verifying Antenna Systems

Antenna Feedline System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3

Potential Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-5

Transmission Lines/Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-5

Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-6

Typical Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-7

Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9

Installation and Maintenance Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10

8. Key Reference

Alphabetical Key Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3

9. Characteristics

Overview of Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2

Frequency Range Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2

Phase Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2

General Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-3

SRL Measurement Uncertainty vs System Directivity . . . . . . . . . . . . . . . . . . . . . . . . .9-4

SRL Measurement Uncertainty vs Connector Fault . . . . . . . . . . . . . . . . . . . . . . . . . . .9-8

Minimizing Measurement Uncertainty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-8

Contents

Fault Location Distance Range and Resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12

Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12

Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12

Typical Distance Data in Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13

Distance Data in Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16

A. Cable Loss and Velocity Factors

Cable Loss and Velocity Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-2

1-1

1 Introduction and Measurement

Theory

Autres manuels pour 8712ET

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Agilent Technologies Instrument de mesure

Agilent Technologies

Agilent Technologies E5500A Manuel utilisateur

Agilent Technologies

Agilent Technologies AA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies E4991A Manuel utilisateur

Agilent Technologies

Agilent Technologies ESA-E E4402B Manuel utilisateur

Agilent Technologies

Agilent Technologies Agilent E6474A Manuel utilisateur

Agilent Technologies

Agilent Technologies 8753ET Manuel utilisateur

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuel utilisateur

Agilent Technologies

Agilent Technologies N9342C Manuel utilisateur

Agilent Technologies

Agilent Technologies 85301B Manuel utilisateur

Agilent Technologies

Agilent Technologies E5071C ENA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 6811B Manuel utilisateur

Agilent Technologies

Agilent Technologies HP 16500B Manuel de service

Agilent Technologies

Agilent Technologies 16800 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies N6705 Manuel utilisateur

Agilent Technologies

Agilent Technologies U3401A Manuel

Agilent Technologies

Agilent Technologies 86122A Manuel utilisateur

Agilent Technologies

Agilent Technologies U1701A Manuel utilisateur

Agilent Technologies

Agilent Technologies ESA-E E4404B Manuel utilisateur

Agilent Technologies

Agilent Technologies G6691A Manuel utilisateur

Agilent Technologies

Agilent Technologies 1670G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 1664A Manuel utilisateur

Agilent Technologies

Agilent Technologies 8560 E-Series Manuel utilisateur

Agilent Technologies

Agilent Technologies PSA Series Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies VARIAN Dual Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur