Agilent Technologies 86122A Manuel utilisateur

Agilent Technologies

Agilent 86122A

Multi-Wavelength Meter

User's Guide

Notices

This document contains proprietary

information that is protected by

No part of this document may reproduced

in (including electronic storage and

retrieval or translation into a foreign

language) without prior agreement and

written consent from Agilent Technologies

GmbH as governed by United States and

international copywright laws.

Agilent Technologies Deutschland GmbH

Herrenberger Str. 130

71034 Böblingen

Germany

Manual Part Number

86122-90004

Edition

Second edition, November 2004

First edition, July 2003

Warranty

This Agilent Technologies instrument

product is warranted against defects in

material and workmanship for a period

of one year from date of shipment.

During the warranty period, Agilent

will, at its option, either repair or

replace products that prove to be

defective.

For warranty service or repair, this

product must be returned to a service

facility designated by Agilent. Buyer

shall prepay shipping charges to

Agilent and Agilent shall pay shipping

charges to return the product to Buyer.

However, Buyer shall pay all shipping

charges, duties, and taxes for products

returned to Agilent from another

country.

Agilent warrants that its software and

firmware designated by Agilent for use

with an instrument will execute its

programming instructions when

properly installed on that instrument.

Agilent does not warrant that the

operation of the instrument, software,

or firmware will be uninterrupted or

error free.

Limitation of Warranty

The foregoing warranty shall not apply

to defects resulting from improper or

inadequate maintenance by Buyer,

Buyer-supplied software or interfacing,

unauthorized modification or misuse,

operation outside of the environmental

specifications for the product, or

improper site preparation or

maintenance.

No other warranty is expressed or

implied. Agilent Technologies

specifically disclaims the implied

warranties of Merchantability and

Fitness for a Particular Purpose.

Exclusive Remedies

The remedies provided herein are

Buyer's sole and exclusive remedies.

Agilent Technologies shall not be liable

for any direct, indirect, special,

incidental, or consequential damages

whether based on contract, tort, or any

other legal theory.

Assistance

Product maintenance agreements and

other customer assistance agreements

are available for Agilent Technologies

products. For any assistance contact

your nearest Agilent Technologies

Sales and Service Office.

Certification

Agilent Technologies Inc. certifies that

this product met its published

specifications at the time of shipment

from the factory.

Agilent Technologies further certifies

that its calibration measurements are

traceable to the United States National

Institute of Standards and Technology,

NIST (formerly the United States

National Bureau of Standards, NBS) to

the extent allowed by the Institutes’s

calibration facility, and to the

calibration facilities of other

International Standards Organization

members.

ISO 9001 Certification

Produced to ISO 9001 international

quality system standard as part of our

objective of continually increasing

customer satisfaction through

improved process control.

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in damage to the product or loss of

important data. Do not proceed

beyond a CAUTION notice until the

indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated

conditions are fully understood

and met.

Warnings and Notices

WARNING

To avoid the possibility of injury or death, you must observe the following

precautions before switching on the instrument.

Insert the power cable plug only into a socket outlet provided with a

protective earth contact. Do not negate this protective action by the

using an extension cord without a protective conductor.

WARNING

Never look directly into the end of a fiber or a connector, unless you are

absolutely certain that there is no signal in the fiber.

Agilent Technologies Sales and Service Offices

For more information about Agilent Technologies test and measurement

products, applications, services, and for a current sales office listing, viesit

our web site:

http://www.agilent.com/comms/lightwave

You can also contact one of the following centers and ask for a test and

measurement sales representative.

United States: 1 800 829 4444

1 800 829 4433(FAX)

Canada: 1 877 894 4414

(1888 900 8921(FAX)

Europe: (31 20) 547 2111

(31 20) 547 2190 (FAX)

Japan: 0120 421 345

0120 421 678 (FAX)

Mexico (52 55) 5081 9469

(52 55) 5081 9467 (FAX)

Australia: 1 800 629 485

1 800 142 134 (FAX)

Asia-Pacific: 800 930 871

800 908 476 (FAX)

Brazil (55 11) 4197 3600

(55 11) 4197 3800 (FAX)

Agilent 86122A Multi-Wavelength Meter, Second Edition 5

Contents

Setting Up the 86122A 9

General Safety Considerations 10

Step 1. Inspect the Shipment 15

Options and Accessories 16

Step 2. Consider Environmental Specifications 18

Step 3. Configure for Bench Top or Rack Mount Use 20

Step 4. Connect a Keyboard and Mouse (Optional) 22

Step 5. Connect the Line Cord 23

Line Power Cable 24

Step 6. Turn On the Line Power 25

Interacting With the Display 26

Step 7. Calibrate the Touch Screen (Optional) 27

Step 8. Set the Time and Date 29

Step 9. Set the System Standby Mode 30

Step 10. Add a Printer 32

Step 11. Avoid costly repairs 36

Step 12. For More Information 37

Cleaning Connections for Accurate Measurements 38

Choosing the Right Connector 38

Inspecting Connectors 41

Cleaning Connectors 45

Returning the Instrument for Service 49

Preparing the instrument for shipping 50

Agilent Technologies Service Offices 52

Call Center 52

Service Center 52

Hard Drive Backup and Recovery 53

Create a New System Utility Disk 54

Working in Comfort 55

About Repetitive Strain Injury 56

Mice and Other Input Devices 58

6Agilent 86122A Multi-Wavelength Meter, Second Edition

Using the 86122A 59

Introduction 60

Differences Between the 86122A and the 86120C 61

Differences in General Operation 62

Differences in Remote Commands 63

Front and Rear Panel Features 64

Rear Panel 64

Front Panel 65

Main Screen Layout 66

Graphs and Tables 68

Front Panel Buttons 69

Menus 71

86122A Dialog Box Operation 75

Making Measurements 76

Step 1. Consider Measurement Limitations 76

Step 2. Select Basic Measurement Setup Parameters 78

Step 3. Define Laser-Line Peaks 81

Step 4. Make Measurements 83

Step 5. Adjust the Graph to Your Preference 86

Step 6. Save Measurement Results 89

Using the Built-In Information System 93

Introduction 94

The 86122A Help Contents 95

Description of the Contents Topics 96

Getting Help While Changing Instrument Settings 98

Hiding the Help 99

Printing the Contents of a Topic 100

Selecting the Help Language 101

Specifications and Regulatory Information 103

Specifications 104

Laser Safety Information 107

Agilent 86122A Multi-Wavelength Meter, Second Edition 7

Compliance with German Noise Requirements 108

Compliance with Canadian EMC Requirements 108

Declaration of Conformity 109

8Agilent 86122A Multi-Wavelength Meter, Second Edition

Agilent 86122A Multi-Wavelength Meter, Second Edition 9

Setting Up the 86122A

General Safety Considerations. . . . . . . . . . . . . . . . . . . . . . . 10

Step 1. Inspect the Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Step 2. Consider Environmental Specifications . . . . . . . . . . . . .18

Step 3. Configure for Bench Top or Rack Mount Use . . . . . . . .20

Step 4. Connect a Keyboard and Mouse (Optional). . . . . . . . . .22

Step 5. Connect the Line Cord . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Step 6. Turn On the Line Power . . . . . . . . . . . . . . . . . . . . . . . . . .25

Step 7. Calibrate the Touch Screen (Optional) . . . . . . . . . . . . . .27

Step 8. Set the Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Step 9. Set the System Standby Mode . . . . . . . . . . . . . . . . . . . .30

Step 10. Add a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Step 11. Avoid costly repairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Step 12. For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Cleaning Connections for Accurate Measurements . . . . 38

Returning the Instrument for Service . . . . . . . . . . . . . . . . .49

Agilent Technologies Service Offices . . . . . . . . . . . . . . . . .52

Hard Drive Backup and Recovery . . . . . . . . . . . . . . . . . . . .53

This chapter shows you how to properly set up your 86122A. Follow the

setup steps in the order presented. In addition, you will learn how to use

proper optical connection cleaning techniques to avoid costly repairs.

Lastly, this chapter explains how to return your instrument for service.

Setting Up the 86122A General Safety Considerations

10 Agilent 86122A Multi-Wavelength Meter, Second Edition

General Safety Considerations

This product has been designed and tested in accordance with the

standards listed in the Manufacturer’s Declaration of Conformity, and has

been supplied in a safe condition. The documentation contains information

and warnings which must be followed by the user to ensure safe operation

and to maintain the product in a safe condition.

Safety Symbols

The caution sign denotes a hazard. It calls attention to a procedure

which, if not correctly performed or adhered to, could result in

damage to or destruction of the product. Do not proceed beyond a

caution sign until the indicated conditions are fully understood and

met.

CAUTION

The warning sign denotes a hazard. It calls attention to a

procedure which, if not correctly performed or adhered to, could

result in injury or loss of life. Do not proceed beyond a warning

sign until the indicated conditions are fully understood and met.

WARNING

Table des matières

Autres manuels Agilent Technologies Instrument de mesure

Agilent Technologies

Agilent Technologies 4156b Manuel utilisateur

Agilent Technologies

Agilent Technologies 83438A Manuel utilisateur

Agilent Technologies

Agilent Technologies E8356A Manuel utilisateur

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuel utilisateur

Agilent Technologies

Agilent Technologies E8361C Guide de démarrage rapide

Agilent Technologies

Agilent Technologies 1680 series Manuel utilisateur

Agilent Technologies

Agilent Technologies M9302A Manuel utilisateur

Agilent Technologies

Agilent Technologies 4352B Manuel utilisateur

Agilent Technologies

Agilent Technologies U1701B Manuel

Agilent Technologies

Agilent Technologies 89410A Manuel utilisateur

Agilent Technologies

Agilent Technologies E4417A Manuel utilisateur

Agilent Technologies

Agilent Technologies 8510C Manuel utilisateur

Agilent Technologies

Agilent Technologies FieldFox MW N9913A Manuel utilisateur

Agilent Technologies

Agilent Technologies 11867A? Manuel de service

Agilent Technologies

Agilent Technologies N5230C Manuel utilisateur

Agilent Technologies

Agilent Technologies U2300A Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 8753ET Manuel utilisateur

Agilent Technologies

Agilent Technologies 1290 Infinity II 2D-LC Solution Manuel utilisateur

Agilent Technologies

Agilent Technologies 8720E Series Manuel utilisateur

Agilent Technologies

Agilent Technologies Agilent 4396B Manuel utilisateur

Agilent Technologies

Agilent Technologies B1500A Manuel utilisateur

Agilent Technologies

Agilent Technologies EMC Series Manuel

Agilent Technologies

Agilent Technologies E444xAU Option H37 Manuel utilisateur

Agilent Technologies

Agilent Technologies B1500A Guide d'installation

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur