Agilent Technologies U1701A Manuel utilisateur

Agilent Technologies

Data Logger for Agilent

Handheld Capacitance

Meter

Quick Start Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

U1701-90033

Edition

Third Edition, December 1, 2009

Printed in Malaysia

Agilent Technologies, Inc.

5301 Stevens Creek Blvd.

Santa Clara, CA 95052 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

II Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide

Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide III

Contents

Introduction 1

System Requirements 2

Agilent License Terms 3

A. Hardware and Data Logger Installation 6

Hardware Installation 6

Data Logger Software Installation 7

B. Equipment Setup and Connection 8

C. Using the Data Logger 9

Automatic - Continuous Mode 10

Automatic - Up To x Count Mode 11

Manual Mode 12

D. Removing the Data Logger 13

Uninstalling from the Windows Start menu 13

Uninstalling from the Windows Add/Remove Programs 14

IV Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide

Contents

Introduction

Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide 1

Introduction

The Agilent U1701A/U1701B Dual Display Handheld Capacitance

Meter has a bi- directional (full duplex) communication capability that

enables data transfer from the meter to a PC. The required accessory

for this communication capability is an optional IR- USB cable, to be

used with an application software that is downloadable from the

Agilent Web site.

The Data Logger for Agilent Handheld Capacitance Meter is an

application software that is targeted to extend the capabilities of the

U1701A/U1701B Dual Display Handheld Capacitance Meter. The

software provides a simple graphical user interface (GUI) that allows

you to perform basic controls and measurements through the PC. The

installation of this application software will not affect the electronic

characteristics, specifications, functions, and operations of the

instrument.

For instrument set up and operation, please refer to the Agilent

U1701A Dual Display Handheld Capacitance Meter User's and Service

Guide, U1701- 90032 or Agilent U1701B Dual Display Handheld

Capacitance Meter User's and Service Guide, U1701- 90055.

Figure 1 Cable connection for remote communication

IR-USB Cable

NOTE

The IR-USB cable functions as a serial RS-232 that connects the instrument to the

USB port of the computer.

2 Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide

Introduction

System Requirements

Hardware Requirements

Instrument Requirements:

•U1701A/U1701B Dual Display Handheld Capacitance Meter

•IR- USB Cable*

PC Requirements

For best performance, ensure that your PC meets the following

minimum requirements:

Software Requirements

* The IR-USB cable and the USB-Serial cable are used interchangeably throughout this

document. Both terms are referring to the same item.

PC Requirements Specification (Minimum)

Processor Pentium® 1 GHz 32-bit (x86) processor or better

Operating System Microsoft® Windows 2000/XP Service Pack 3

Available RAM 512 MB minimum (1 GB recommended)

Hard Disk Space 1 GB minimum (2 GB recommended)

Software Requirements Version (Minimum)

Prerequisites Microsoft .NET Framework 3.5*

Agilent VEE Pro 9.0 Runtime*

PL-2303 USB-Serial Driver*

* Bundled with Data Logger for Agilent Handheld Capacitance Meter installer.

Introduction

Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide 3

Agilent License Terms

The following License Terms govern your use of the Licensed

Materials unless you have a separate written agreement with Agilent,

in which case, that written agreement will control and take

precedence.

License Grant. Agilent grants you a non- exclusive license to use one

copy of the Licensed Materials. With respect to the software portion

of the Licensed Materials, “use” means to install, store, display,

execute and use the software on the computer or device, or on the

class or series of equipment, for which you have paid the

corresponding license fee. If no fee is required, you may use the

software on one computer or device. If the software is licensed for

concurrent or network use, you may not allow more than the

maximum number of authorized users to access and use the software

concurrently.

License Restrictions. You may make copies or adaptations of the

Licensed Materials only for archival purposes or only when copying

or adaptation is an essential step in the authorized use of the

Licensed Materials. You must reproduce all copyright notices in the

original Licensed Materials on all permitted copies or adaptations.

Except as provided here, you may not copy, modify or translate the

Licensed Materials or disable any of its features. You may not copy

the Licensed Materials onto any public or distributed network or

service bureau. In addition, you may not lease, rent or sublicense the

Licensed Materials without Agilent's prior written consent.

Upgrades. This license does not entitle you to receive upgrades,

updates or technical support. Such services may be purchased

separately. If the Licensed Materials include an upgrade to previously

licensed material, your license in that material automatically

terminates and you should destroy the previous content and any

copies or adaptations.

4 Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide

Introduction

Ownership. The Licensed Materials are owned and copyrighted by

Agilent or its third party suppliers. Your license confers no title to, or

ownership in, the Licensed Materials and is not a sale of any rights in

the Licensed Materials. Agilent's third party suppliers may protect

their rights in the event of any violation of these License Terms.

No Disassembly. You may not disassemble or decompile the Licensed

Materials unless you obtain Agilent's prior written consent. In some

jurisdictions, Agilent's consent may not be required for limited

disassembly or decompilation. Upon request, you will provide Agilent

with reasonably detailed information regarding any such permitted

disassembly or decompilation.

High Risk Activities. The Licensed Materials are not specifically

designed, manufactured or intended for use in the planning,

construction, maintenance or direct operation of a nuclear facility,

nor for use in on- line control or fail safe operation of aircraft

navigation, control or communication systems, weapon systems or

direct life support systems.

Transfer. You may transfer the license granted to you here provided

that you deliver all the Licensed Materials to the transferee along

with these License Terms. The transferee must accept these License

Terms as a condition to any transfer. Your license to use the Licensed

Materials will terminate upon transfer.

Termination. Agilent may terminate your license upon notice for

failure to comply with any of these License Terms. Upon termination,

you must immediately destroy the Licensed Materials, together with

all copies, adaptations and merged portions in any form.

Introduction

Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide 5

Export Requirements. The Licensed Materials may be subject to

export control laws, including the U.S. Export Administration

Regulations and other export laws and regulations of other countries.

You may not export or re- export the Licensed Materials or any copy

or adaptation in violation of any applicable laws or regulations. You

certify that you are not on the U.S. Department of Commerce's Denied

Persons List, the U.S. Department of Treasury's Specially Designated

Nationals list or other government list prohibiting you from receiving

the Licensed Materials.

U.S. Government Restricted Rights. If the Licensed Materials are

licensed for use in the performance of a U.S. Government prime

contract or subcontract, you agree that they have been developed

entirely at private expense. You further agree that they are licensed

as “commercial computer software” as defined in DFARS 252.227 7014

(June 1995), as a “commercial item” as defined in FAR 2.101(a), or as

“Restricted computer software” as defined in FAR 52.227 19 (June

1987) (or any equivalent agency regulation or contract clause),

whichever is applicable. You agree that you acquire only those rights

provided for such Licensed Materials by the applicable FAR or DFARS

clause or the Agilent standard license agreement for the product

involved. Contractor/Manufacturer is Agilent Technologies, Inc., 5301

Stevens Creek Blvd, Santa Clara, CA 95051 USA.

6 Data Logger for Agilent Handheld Capacitance Meter Quick Start Guide

A Hardware and Data Logger Software Installation

A. Hardware and Data Logger Installation

Hardware Installation

1Connect the USB connector of the IR- USB cable to an available

USB port on your PC and the other end of the cable with the text

side facing upwards to the instrument.

2Your PC will automatically detect the USB cable.

NOTE

Make sure you have downloaded the Data Logger for Agilent Handheld

Capacitance Meter application software from the Agilent Web site and

install it to your PC before connecting the IR-USB cable to your PC. The

IR-USB cable driver will be installed automatically as a pre-requisites prior

to install the application software.

Autres manuels pour U1701A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Agilent Technologies Instrument de mesure

Agilent Technologies

Agilent Technologies B1500A Manuel utilisateur

Agilent Technologies

Agilent Technologies 34136A Manuel utilisateur

Agilent Technologies

Agilent Technologies ESA-L1500A Guide de démarrage rapide

Agilent Technologies

Agilent Technologies 8753ES Manuel utilisateur

Agilent Technologies

Agilent Technologies VS Series Guide de référence

Agilent Technologies

Agilent Technologies 339B Guide d'installation

Agilent Technologies

Agilent Technologies 1664A Manuel utilisateur

Agilent Technologies

Agilent Technologies 8702D Manuel utilisateur

Agilent Technologies

Agilent Technologies Agilent 4396B Manuel utilisateur

Agilent Technologies

Agilent Technologies N2797A Manuel utilisateur

Agilent Technologies

Agilent Technologies 4284A Manuel utilisateur

Agilent Technologies

Agilent Technologies 86082A Manuel utilisateur

Agilent Technologies

Agilent Technologies N9340B Manuel

Agilent Technologies

Agilent Technologies 89604 Manuel utilisateur

Agilent Technologies

Agilent Technologies 8504B Manuel utilisateur

Agilent Technologies

Agilent Technologies E5062A ENA-L Series Guide de démarrage rapide

Agilent Technologies

Agilent Technologies E4419B Manuel utilisateur

Agilent Technologies

Agilent Technologies K6460 Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies 8453 Manuel utilisateur

Agilent Technologies

Agilent Technologies ESA-E E4402B Manuel utilisateur

Agilent Technologies

Agilent Technologies PSA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies ESA-E Series Manuel

Agilent Technologies

Agilent Technologies AN 1287-6 Instructions d'installation et d'utilisation

Agilent Technologies

Agilent Technologies ADM series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur