AEMC instruments CM605 Manuel utilisateur

AC/DC LOW CURRENT

CLAMP-ON METER

CM605

E N G L I S H User Manual

www. .com information@itm.com1.800.561.8187

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

certiﬁes that this instrument has been calibrated

using standards and instruments traceable to

international standards.

We guarantee that at the time of shipping your

instrument has met its published speciﬁcations.

An NIST traceable certiﬁcate may be

requested at the time of purchase, or obtained

by returning the instrument to our repair and

calibration facility, for a nominal charge.

The recommended calibration interval for this

instrument is 12 months and begins on the date of

receipt by the customer. For recalibration, please

use our calibration services. Refer to our repair

and calibration section at www.aemc.com.

Serial #: ________________________________

Catalog #: 7000.02

Model #: CM605

Please ﬁll in the appropriate date as indicated:

Date Received: _________________________________

Date Calibration Due: _______________________

Chauvin Arnoux®, Inc.

d.b.a AEMC®Instruments

www.aemc.com

www. .com information@itm.com1.800.561.8187

Table of Contents

1. INTRODUCTION............................................................................... 2

1.1 International Electrical Symbols...........................................................3

1.2 Receiving Your Shipment.....................................................................3

1.3 Ordering Information ............................................................................3

2. PRODUCT FEATURES ...................................................................... 4

2.1 Control Features ..................................................................................4

2.2 Display Features ..................................................................................5

2.3 Button Functions ..................................................................................5

2.3.1 HOLD/PEAK Button ...............................................................5

2.3.2 ZERO Button...........................................................................5

3. SPECIFICATIONS............................................................................. 6

3.1ElectricalSpeciﬁcations .......................................................................6

3.2EnvironmentalSpeciﬁcations...............................................................7

3.3MechanicalSpeciﬁcations....................................................................8

3.4 SafetySpeciﬁcations............................................................................8

4. OPERATION .................................................................................... 9

4.1 Preparation Before Use........................................................................9

4.2 AC Current Measurement ..................................................................10

4.3 DC Current Measurement..................................................................11

4.4 AC Voltage Measurement ..................................................................12

4.5 DC Voltage Measurement..................................................................13

4.6 Resistance Measurement ..................................................................14

4.7 Continuity Test....................................................................................15

4.8 Analog Output ....................................................................................16

5. MAINTENANCE ............................................................................. 17

5.1 Warning .............................................................................................17

5.2 Battery Replacement..........................................................................17

5.3 Cleaning.............................................................................................17

Repair and Calibration........................................................................................18

Technical and Sales Assistance .........................................................................18

Limited Warranty ................................................................................................19

Warranty Repairs................................................................................................19

www. .com information@itm.com1.800.561.8187

AC Clamp-on Meter Model CM605

CHAPTER 1

INTRODUCTION

Warning

These safety warnings are provided to ensure the safety of personnel

and proper operation of the instrument.

• Readtheinstructionmanualcompletelyandfollowallsafetyinfor-

mation before operating this instrument.

• OnlyuseleadsthatcomplywiththeIEC/EN61010.Beforeusing

them, make sure that they are in safe working order.

• Onlyusefactorysuppliedleads.

• Neverexceedtheprotectionlimitvaluesindicatedinthespeciﬁca-

tions for each type of measurement.

• Nevermeasurecurrentwhilethetestleadsareconnectedtothe

input jacks.

• Useextremecautionwhenmeasuringlivesystemswithvoltages

greater than 50VDC or 30VAC.

•

Do not perform resistance or continuity tests on a live circuit.

• Useextremecarewhenworkingaroundbusbarsandbareconduc-

tors.

• Donotusethemeterinoverrange/overloadconditions(OL).

• Whenthemultimeterclampislinkedtothemeasurementcircuits,

do not touch any unused terminals.

• Beforechangingthefunction,disconnectthemeasurementleads

from the circuit measured.

www. .com information@itm.com1.800.561.8187

AC Clamp-on Meter Model CM605

1.1 International Electrical Symbols

Thissymbolsigniﬁesthattheinstrumentisprotectedbydoubleorrein-

forcedinsulation.Useonlyspeciﬁedreplacementpartswhenservicingthe

instrument.

This symbol on the instrument indicates a WARNING and that the

operator must refer to the user manual for instructions before operating

the instrument. In this manual, the symbol preceding instructions indicates

that if the instructions are not followed, bodily injury, installation/sample and

product damage may result.

Risk of electric shock. The voltage at the parts marked with this symbol

may be dangerous.

1.2 Receiving Your Shipment

Upon receiving your shipment, make sure that the contents are consistent with the

packing list. Notify your distributor of any missing items. If the equipment appears

tobedamaged,ﬁleaclaimimmediatelywiththecarrierandnotifyyourdistributor

at once, giving a detailed description of any damage. Save the damaged packing

container to substantiate your claim. Do not use an instrument that appears to be

damaged.

1.3 Ordering Information

Model CM605 ..................................................................................Cat. #7000.02

Includes clamp-on meter, lead set (red & black lead) with needle point test probes,

carrying case, 2x1.5V AAA batteries and a user manual.

Set of 2, 5 ft color-coded leads...........................................................Cat. #2154.74

www. .com information@itm.com1.800.561.8187

AC Clamp-on Meter Model CM605

CHAPTER 2

PRODUCT FEATURES

2.1 Control Features

Tapered jaws for

crowded wiring or areas

(

Ø.45"- 12mm

)

2. Safety barrier

anti-slip guard

3. Lever for jaw

opening/closing

4. LCD display

5. COM(Black)andPositive

(Red)inputterminaljacks

6. Data hold and Peak hold

buttons

7. Rotary range

selector switch

ZERO

OFF

HOLD

PEAK

Press

2 Sec

COM

600V

CAT II

www. .com information@itm.com1.800.561.8187

AC Clamp-on Meter Model CM605

2.2 Display Features

Negative polarity

Auto shutdown

Low battery

AC mode

DC mode

Auto range

Zero(Relative)

Peak function

Hold function

Continuity

A V

Current / Voltage

Ω

Resistance

2.3 Button Functions

2.3.1 HOLD/PEAK Button

Data Hold Function: This function locks the displayed value.

• Toactivate,pressthisbuttonduringthemeasurement.The symbol

appears and the measurement is locked.

• Todeactivate,pressthebuttonagain.

Peak Hold Function: This function displays the peak value.

•To activate, press this button during a measurement until the symbol

appears.

• Thehighestmeasurementisstoredinmemory.

• TodeactivatethePEAKfunction,pressandholddownthebuttonfor

approximately2seconds.

2.3.2 ZERO Button

• Toactivate,presstheZERO button to enter the Zero mode.

• The symbol will appear and Zero the display.

The reading is stored as a reference value for subsequent measure-

ments.

• ToexittheZeromode,presstheZERO button again.

www. .com information@itm.com1.800.561.8187

AC Clamp-on Meter Model CM605

CHAPTER 3

SPECIFICATIONS

3.1 Electrical Speciﬁcations

Reference Conditions: Accuracy given @ 23°C ± 5°C, 80% RH Max, Conductor centered in jaws, 45-65Hz, No

DC Component.

AC Current ( )

Range Resolution Accuracy Frequency

10A 1mA 2.0% R ± 10cts

50 to 500Hz

100A 10mA 80A: 2.0% R ± 10cts

>80A: 3.5% R ± 10cts

DC Current ( ) - Positive only*

Range Resolution Accuracy

10A 1mA 2.5% R ± 10cts

100A 10mA 80A: 2.5% R ± 10cts

>80A: 4.5% R ± 10cts

AC Volts ( )

Range Resolution Accuracy Impedance Frequency

600V 100mV 1.5% R ± 5cts 10MΩ, <50pF 40 to 500Hz

Overload Protection: 660Vrms

DC Volts ( ) - Positive only*

Range Resolution Accuracy Input Impedance

600V 100mV 1.0% R ± 2cts 10MΩ

Overload Protection: 660Vrms

* For negative measurement, add 2cts to the accuracy

www. .com information@itm.com1.800.561.8187

AC Clamp-on Meter Model CM605

Resistance (Ω)

Range Resolution Accuracy Test Voltage Protection

10kΩ(9999Ω)1Ω1.0% R ± 3cts <3.0VDC 600Vrms

Continuity ( )

Buzzer Resolution Test Voltage Protection

<100Ω± 25Ω1Ω<3.0VDC 600Vrms

Analog Output

Range Output Frequency Output Impedance

AAC & ADC 10mV/A through

front banana jacks 0 to 20kHz @ ± 3db 3kΩ, <50pF

Digital display: 10,000-count4digitLCDdisplay(9999max)

Polarity:

When a negative signal is applied, the symbol appears.

Overload:

Iftherangeisexceeded,thesymbol is displayed.

Low Battery Indicator:

is displayed when the voltage supplied by the batteries is lower than the operat-

ing voltage.

Power Supply:

2batteries-1.5VtypeAAA(LR03)

Auto-off:

Automaticshutdownafterapprox10minutewithover-ride

Sampling:

Approx2measurements/second

3.2 Environmental Speciﬁcations

Operating Temperature:

32°to104°F(0°to40°C),<80%RHmaxnon-condensing

Storage Temperature:

14°to140°F(-10°to60°C),<70%RHmaxnon-condensing

Altitude: 6000ft(2000m)

www. .com information@itm.com1.800.561.8187

AC Clamp-on Meter Model CM605

3.3 Mechanical Speciﬁcations

Maximum Cable Diameter:

Ø 0.45"(12mm)

Maximum Jaw Opening:

Ø 0.60"(15mm)

Dimensions:

7.44x2.80x1.46"(189x71x37mm)

Weight:

6.5oz(180g)

3.4 Safety Speciﬁcations

IEC/EN 61010-1, 600V CAT II, 300V CAT III

- Insulation: Class II

- Pollution Degree: 2

www. .com information@itm.com1.800.561.8187

Table des matières

Autres manuels AEMC instruments Instrument de mesure

AEMC instruments

AEMC instruments 300-24-2-10 Manuel utilisateur

AEMC instruments

AEMC instruments MN290 Manuel utilisateur

AEMC instruments

AEMC instruments 6505 Manuel utilisateur

AEMC instruments

AEMC instruments 1510 Manuel utilisateur

AEMC instruments

AEMC instruments 5050 Instructions d'utilisation et de sécurité

AEMC instruments

AEMC instruments 6550 Manuel utilisateur

AEMC instruments

AEMC instruments 6536 Manuel utilisateur

AEMC instruments

AEMC instruments CA7027 Manuel utilisateur

AEMC instruments

AEMC instruments JM840A Manuel utilisateur

AEMC instruments

AEMC instruments MN379T Manuel utilisateur

AEMC instruments

AEMC instruments 5050 Manuel utilisateur

AEMC instruments

AEMC instruments AmpFlex 193-24-BK Manuel utilisateur

AEMC instruments

AEMC instruments MN375 Manuel utilisateur

AEMC instruments

AEMC instruments Simple Logger AmpFlex AL24-2500 Manuel utilisateur

AEMC instruments

AEMC instruments SR601 Manuel utilisateur

AEMC instruments

AEMC instruments MN09 Manuel utilisateur

AEMC instruments

AEMC instruments 6240 Manuel utilisateur

AEMC instruments

AEMC instruments MA194-24-BK Manuel utilisateur

AEMC instruments

AEMC instruments DIGITAL FLEXPROBE 400D-6 Manuel utilisateur

AEMC instruments

AEMC instruments 6526 Manuel utilisateur

AEMC instruments

AEMC instruments A196-24-BK Manuel utilisateur

AEMC instruments

AEMC instruments MN261 Manuel utilisateur

AEMC instruments

AEMC instruments Chauvin Arnoux 6412 Manuel utilisateur

AEMC instruments

AEMC instruments 6505 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur