Advantech PCM-4141 Series Manuel utilisateur

PCM-4141 Series

STPC Atlas 120 MHz CPU Mod-

ule with VGA/LAN/FDD

User Manual

PCM-4141 User Manual ii

All rights are reserved. The original manufacturer reserves the right to

make improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or transmit-

ted in any form or by any means without the prior written permission of

the original manufacturer. Information provided in this manual is

intended to be accurate and reliable. However, the original manufacturer

assumes no responsibility for its use, nor for any infringements upon the

rights of third parties which may result from its use.

Acknowledgements

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc.

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft WindowsÆ is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semiconductor Co., Ltd.

C&T is a trademark of Chips and Technologies, Inc.

UMC is a trademark of United Microelectronics Corporation.

Winbond is a trademark of Winbond Electronics Corp.

STPC is a trademark of SGS Thomson Corp.

For more information on this and other Advantech products, please visit

our website at:

http://www.advantech.com

http://www.advantech.com/epc

For technical support and service, please visit our support website at:

http://www.advantech.com/support

This manual is for the PCM-4141.

Part No. 2006414110 1st. Edition

Printed in Taiwan Jan. 2007

iii

Packing List

Before you begin installing your card, please make sure that the following

materials have been shipped:

• 1 PCM-4141 all-in-one single board computer

• 1 Start-up manual

• CD-ROM or Disks for utility, drivers, and manual (in PDF format)

• 1 IDE flat cable, 44-pin to 44-pin p/n: 1701440504

• 1 Keyboard / PS2 mouse cable p/n: 1700060202

• 1 cable 6-pin (MINI-DIN) to 6-pin (Wafer 2.0 mm) p/n: 1703060053

• 4 COM ports cable p/n: 1701400181

• 1 Parallel cable p/n: 1700260250

• 1 LAN cable p/n: 1701100202

• 1 VGA cable p/n: 1701160150

• 1 FDD converter module p/n: 9681000044E

If any of these items are missing or damaged, contact your distributor or

sales representative immediately.

PCM-4141 User Manual iv

Contents

Chapter 1 General Information ........................................2

1.1 Introduction ....................................................................... 2

1.2 Features ............................................................................. 3

1.3 Specifications .................................................................... 3

1.3.1 Standard SBC functions.................................................. 3

1.3.2 Display ............................................................................ 3

1.3.3 Ethernet function............................................................. 3

1.3.4 Solid state disk ................................................................ 4

1.3.5 Mechanical and environmental....................................... 4

1.4 Board Dimensions ............................................................. 5

Figure 1.1:PCM-4141 Dimensions (component side) .... 5

Figure 1.2:PCM-4141 Dimensions (solder side) ............ 5

Chapter 2 Introduction ......................................................8

2.1 Connectors......................................................................... 8

Table 2.1:Connectors ...................................................... 8

2.2 Locating connectors .......................................................... 9

Figure 2.1:Locating connectors (component side) ......... 9

Figure 2.2:Locating connectors (solder side) ............... 10

2.3 Installation Procedures .................................................... 11

2.4 Ethernet connector (CN6) ............................................... 11

2.4.1 Ethernet connector (CN6)............................................. 11

2.5 TFT panel connector (CN12) .......................................... 11

2.6 Serial ports (CN8) ........................................................... 12

2.6.1 COM1,COM2,COM3,COM4 RS-232 port (CN8) ....... 12

2.6.2 COM2 RS-232/422/485 port (CN3) ............................. 12

Table 2.2:Serial port default settings ............................ 12

2.7 Primary IDE 44-pin connector (CN2)............................. 12

2.7.1 Connecting the hard drive............................................. 12

2.8 PC/104 connector (CN10)............................................... 13

2.9 Parallel port connector (CN7) ......................................... 13

2.10 Backlight connector (CN15) ........................................... 13

2.11 VGA connector (CN13) .................................................. 13

2.11.1 CRT display connector (CN13) .................................... 13

2.12 Reset button connector (CN1)......................................... 14

2.13 PS/MS connector (CN17)................................................ 14

2.14 External -5 V, -12 V power input (CN16) ...................... 14

2.15 Floppy (CN19) ................................................................ 15

2.15.1 Connecting the floppy drive ......................................... 15

2.16 IR connector (CN4)......................................................... 15

PCM-9381 User Manual vi

2.17 Power and HDD LED connector (CN5) ......................... 15

Chapter 3 Software Configuration .................................18

3.1 Introduction ..................................................................... 18

3.2 Connections for four standard LCDs (PCM-4141) ......... 18

3.2.1 Toshiba LTM10C209A(640x480 TFT color LCD)...... 18

Table 3.1:Connections to Toshiba LTM10C209A ....... 18

3.2.2 Connections to Toshiba LTM12C275C (800 x 600 TFT

color LCD)........................................................................19

Table 3.2:Connections to Toshiba LTM12C275C ....... 19

3.3 Ethernet software configuration ...................................... 20

Chapter 4 Award BIOS Setup.........................................24

4.1 System test and initialization........................................... 24

4.1.1 System configuration verification................................. 24

4.1.2 Further CMOS Data Safeguards ................................... 24

4.2 Award BIOS setup .......................................................... 25

4.2.1 Entering setup ............................................................... 25

4.2.2 Standard CMOS setup .................................................. 25

Figure 4.1:BIOS setup initial screen............................. 26

Figure 4.2:Standard CMOS setup screen...................... 26

4.2.3 Advanced BIOS setup................................................... 27

Figure 4.3:Advanced BIOS setup screen...................... 27

4.2.4 Advanced chipset setup ................................................ 28

Figure 4.4:Advanced chipset setup............................... 28

4.2.5 Power management setup ............................................. 29

Figure 4.5:Power management setup............................ 29

4.2.6 PCI / Plug and Play configuration ................................ 30

Figure 4.6:Plug and Play Configuration ....................... 30

4.2.7 Peripheral setup............................................................. 31

Figure 4.7:Peripheral setup ........................................... 31

4.2.8 Load BIOS defaults ...................................................... 32

Figure 4.8:Load BIOS Defaults .................................... 32

4.2.9 Change password .......................................................... 33

4.2.10 Save settings and exit.................................................... 34

Figure 4.9:Save and exit settings .................................. 34

4.2.11 Exit without saving ....................................................... 35

Figure 4.10:Exit without saving.................................... 35

Chapter 5 VGA Setup ......................................................38

5.1 Introduction ..................................................................... 38

5.1.1 Chipset .......................................................................... 38

5.1.2 Display memory............................................................ 38

5.2 Installation of VGA driver .............................................. 38

5.2.1 Installation for Windows 95/98 .................................... 39

Chapter 6 PCI Bus Ethernet Interface...........................46

vii

6.1 Introduction ..................................................................... 46

6.2 Installation of Ethernet driver ......................................... 46

6.2.1 Installation for Windows 95/98/NT.............................. 46

6.3 Further information ......................................................... 48

Chapter 7 Keyboard and Mouse Driver for Win95/98 .50

7.1 Overview ......................................................................... 50

7.2 Keyboard and mouse Installation for Windows 98......... 50

Appendix A Programming the Watchdog Timer .............56

A.1 Programming the watchdog timer ................................... 56

Appendix B Installing PC/104 Modules ............................60

B.1 Installing PC/104 modules .............................................. 60

Table B.1:PCM-4141 PC/104 (CN10).......................... 62

Appendix C Pin Assignments .............................................66

C.1 System reset button (CN1) .............................................. 66

Table C.1:System reset button (CN1)........................... 66

C.2 Primary IDE 44 pin Connector(CN2) ............................ 67

Table C.2:Primary IDE 44 pin Connector(CN2) .......... 67

C.3 RS-422/485 connector (CN3).......................................... 68

Table C.3:RS-422/485 connector (CN3) ...................... 68

C.4 IR connector (CN4)......................................................... 68

Table C.4:IR connector (CN4)...................................... 68

C.5 Power and Hdisk LED connector (CN5)......................... 69

Table C.5:Power and Hdisk LED connector (CN5) ..... 69

C.6 LAN connector (CN6)..................................................... 69

Table C.6:LAN connector (CN6) ................................. 69

C.7 Print port connector (CN7).............................................. 70

Table C.7:Print port connector (CN7) .......................... 70

C.8 4 COM Port connector (CN8) ......................................... 71

Table C.8:4 COM Port connector (CN8)...................... 71

C.9 USB connector (CN9) ..................................................... 72

Table C.9:USB connector (CN9).................................. 72

C.10 PC/104 connector (CN10)............................................... 72

C.11 GPIO connector (CN11).................................................. 73

Table C.10:GPIO connector (CN11) ............................ 73

C.12 TFT Panel connector (CN12).......................................... 74

Table C.11:TFT Panel connector (CN12)..................... 74

C.13 VGA connector (CN13) .................................................. 75

Table C.12:VGA connector (CN13)............................. 75

C.14 Main power input connector (CN14) .............................. 76

Table C.13:Main power input connector (CN14)......... 76

C.15 Panel back-light power connector (CN15)...................... 77

Table C.14:Panel back-light power connector (CN15) 77

PCM-9381 User Manual viii

C.16 External -5V, -12V power input (CN16) ........................ 77

Table C.15:External -5V, -12V power input (CN16) ... 77

C.17 KB/MS connector (CN17) .............................................. 78

Table C.16:KB/MS connector (CN17) ......................... 78

C.18 Floppy (CN19) ................................................................ 79

Table C.17:Floppy (CN19)........................................... 79

Appendix D System Assignments .......................................82

D.1 System I/O ports.............................................................. 82

Table D.1:System I/O ports .......................................... 82

D.2 DMA channel assignments.............................................. 83

Table D.2:DMA channel assignments .......................... 83

D.3 Interrupt assignments ...................................................... 84

Table D.3:Interrupt assignments................................... 84

D.4 1st MB memory map ...................................................... 85

Table D.4:1st MB memory map ................................... 85

Appendix E LCD Services ..................................................88

E.1 LCD Services .................................................................. 88

CHAPTER

General Information

This chapter gives background infor-

mation on the PCM-4141.

Sections include:

• Introduction

• Features

• Specifications

• Board dimensions

PCM-4141 User Manual 2

Chapter 1 General Information

1.1 Introduction

The PCM-4141 is the ultimate cost-effective PC/104 solution for limited-

space applications. It offers all the functions of an AT-compatible indus-

trial computer on a single board, and occupies less space than a 3¾" hard

drive. The PCM-4141 comes with an embedded STPC Atlas 120 MHz

processor on board. For maximum performance, the PCM-4141 also sup-

ports on board memory that can accept up to 64 MB memory. Onboard

features include a socket for a CompactFlash™ Card, 100Base-T Ether-

net, Enhanced IDE interface, one parallel port, four serial ports (RS-232),

a keyboard, and a PS/2 mouse interface. A SVGA LCD display controller

allows CRT resolutions up to 1024 x 768 @ 16bpp colors, LCD resolu-

tions up to 1024 x 768 @ 16bpp colors.

PCM-4141 use the most industrial grade material and passed the Advan-

tech Phoebus testing profile. Very suitable for wide range temperature

operating, PCM-4141 can operate under -40~85° C environment temper-

ature and with the total onboard materials feature which can have the

strong anti-vibration feature. PCM-4141 is the best choice for rugguized

environment application.

Table des matières

Autres manuels Advantech Matériel informatique

Advantech

Advantech AIMC-3202 Manuel d'installation et d'exploitation

Advantech

Advantech MIO-5376 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6154 Manuel utilisateur

Advantech

Advantech AIMB-588 Manuel utilisateur

Advantech

Advantech ROM-5420 Manuel utilisateur

Advantech

Advantech MIC-75M11 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6178 Manuel utilisateur

Advantech

Advantech PCA-6186 Manuel utilisateur

Advantech

Advantech PCA-6742 Series Manuel d'installation et d'exploitation

Advantech

Advantech PCL-734 Manuel utilisateur

Advantech

Advantech CPC-2520 Manuel utilisateur

Advantech

Advantech PCA-6742 Series Manuel d'installation et d'exploitation

Advantech

Advantech ACP-2020G Manuel utilisateur

Advantech

Advantech SKY-MXM-A500 Manuel utilisateur

Advantech

Advantech ASMB-610V3 Manuel d'installation et d'exploitation

Advantech

Advantech MIO-2375 Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-219 Manuel utilisateur

Advantech

Advantech MIO-4370 Manuel utilisateur

Advantech

Advantech PCA-6186VE Manuel utilisateur

Advantech

Advantech Watchdog Timer UNO-2171 Manuel utilisateur

Advantech

Advantech PCA-6011 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6154 Manuel d'installation et d'exploitation

Advantech

Advantech ECU-P1522LPE Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1710 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur