Advantech PCL-818 Series Manuel utilisateur

PCL-818 Series

12-bit ISA Multifunction Card

User Manual

PCL-818 Series User Manual ii

The documentation and the software included with this product are copy-

righted 2010 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

Part No. 20038180A0 2nd Edition

Printed in Taiwan January 2010

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

PCL-818 Series User Manual iv

Declaration of Conformity

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from Advantech. Please

contact your local supplier for ordering information.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning.

Use a damp cloth. Do not use liquid or spray detergents for clean-

ing.

4. For plug-in equipment, the power outlet socket must be located

near the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Drop-

ping it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before con-

necting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or elec-

trical shock.

13. Never open the equipment. For safety reasons, the equipment

should be opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked

by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

WHERE THE STORAGE TEMPERATURE MAY GO BELOW -

PCL-818 Series User Manual vi

20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAM-

AGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A

CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS

INCORRECTLY REPLACED. REPLACE ONLY WITH THE

SAME OR EQUIVALENT TYPE RECOMMENDED BY THE

MANUFACTURER, DISCARD USED BATTERIES ACCORD-

ING TO THE MANUFACTURER'S INSTRUCTIONS.

The sound pressure level at the operator's position according to IEC 704-

1:1982 is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1.

Advantech disclaims all responsibility for the accuracy of any statements

contained herein.

vii Table of Contents

Contents

Chapter 1 Overview .......................................................... 2

1.1 Introduction ....................................................................... 2

1.2 Features ............................................................................. 3

1.3 Applications ...................................................................... 4

1.4 Installation Guide .............................................................. 5

Figure 1.1:Installation Flow Chart ................................. 6

1.5 Software Overview............................................................ 7

1.6 Device Driver Roadmap.................................................... 8

1.7 Accessories...................................................................... 10

Chapter 2 Installation ..................................................... 12

2.1 Unpacking ....................................................................... 12

2.2 Driver Installation .......................................................... 13

Figure 2.1:Advantech Automation Software Setup ..... 13

Figure 2.2:Options for Driver Setup ............................ 14

2.3 Hardware Installation ..................................................... 15

2.4 Device Setup & Configuration........................................ 16

Figure 2.3:Device Manager ......................................... 16

Figure 2.4:Device Settings ........................................... 17

Figure 2.5:Device Name .............................................. 18

Figure 2.6:Test Utility .................................................. 19

Chapter 3 Signal Connections ........................................ 22

3.1 Overview ......................................................................... 22

3.2 Switch & Jumper Settings............................................... 22

Figure 3.1:Connectors, Jumpers& Switches ................ 22

3.3 Signal Connections.......................................................... 30

3.3.1 Pin Assignments .......................................................... 30

3.3.2 I/O Connector Signal Description ................................ 31

Figure 3.2:Analog Output Connections ....................... 34

3.4 Field Wiring Considerations ........................................... 36

Appendix A Specifications ................................................. 38

A.1 Analog Input ................................................................... 38

A.2 Analog Output................................................................. 39

A.3 Digital Input /Output ....................................................... 39

A.4 Counter/Timer ................................................................. 40

A.5 General ............................................................................ 40

Appendix B Block Diagram............................................... 42

B.1 PCL-818HD/HG.............................................................. 42

B.2 PCL-818L........................................................................ 42

Appendix C Register Structure & Format....................... 44

C.1 Overview ........................................................................ 44

C.2 I/O Port Address Map .................................................... 44

C.3 A/D Data & Channels — BASE+00H~01H .................. 47

PCL-818 Series User Manual viii

C.4 Software A/D Trigger — BASE+00H ........................... 48

C.5 A/D RangeControl — BASE+01H ................................ 48

C.6 MUX Scan Channel Control — BASE+02H.................. 50

C.7 MUX Scan Channel Status — BASE+02H .................... 52

C.8 Digital I/O Registers - BASE + 03/0BH ......................... 52

C.9 D/A Output — BASE+04/05H ....................................... 53

C.10 FIFO Interrupt Control — BASE+06H........................... 54

C.11 Clear Interrupt Request — BASE+08H.......................... 55

C.12 A/D Status — BASE+08H.............................................. 55

C.13 A/D Control — BASE+09H ........................................... 57

C.14 Timer/Counter Enable — BASE+0AH........................... 59

C.15 Programmable Timer/Counter — BASE+0C~0FH ........ 59

C.16 Clear FIFO Interrupt Request — BASE+14H ................ 60

C.17 A/D Data and Channel from FIFO - BASE + 17/18H .... 60

C.18 FIFO Status — BASE+19H ............................................ 61

C.19 FIFO Clear — BASE+19H ............................................. 62

Appendix D Calibration ..................................................... 64

D.1 VR Assignment .............................................................. 65

Figure D.1:PCL-818HD/HG/L VR Assignment ......... 65

D.2 A/D Calibration ............................................................... 66

D.3 D/A Calibration ............................................................... 66

CHAPTER

Overview

Sections include:

• Introduction

• Features

• Applications

• Installation guide

• Software Overview

• Device Driver Roadmap

• Accessories

PCL-818 Series User Manual 2

Chapter 1 Overview

1.1 Introduction

Thank you for buying the Advantech PCL-818HD/HG/L. The PCL-

818HD/HG/L is a high-performance multifunction data acquisition card

for IBM PC/XT/AT or compatible computers. It offers the five most

desired measurement and control functions: 12-bit A/D conversion, D/A

conversion, digital input, digital output and timer/counter.

A programmable-gain instrument amplifier (x 0.5, 1, 2, 4 and 8) lets you

acquire different input signals without external signal conditioning. An

onboard 1 K word FIFO buffer provides high-speed data transfer and pre-

dictable performance under Windows.

Automatic channel scanning circuitry and on-board SRAM let you per-

form multiple-channel A/D conversion with DMA and individual gains

for each channel.

The PCL-818HD uses a CPLD chip designed in-house by Advantech

engineers. This single chip integrates most of the card's functions, giving

you maximum accuracy and reliability, along with minimum cost, size

and power consumption.

The PCL-818HD is hardware and software compatible with its popular

predecessor, the PCL-8l8HG. This puts rich software support and a wide

variety of external signal conditioning boards at your disposal.

Note: AI data acquisition in DMA mode is only recommended

when using an Intel Pentium 3 motherboard. It will not

function properly on a Pentium 4 motherboard or above.

Table des matières

Autres manuels Advantech Matériel informatique

Advantech

Advantech PCA-6743 Manuel d'installation et d'exploitation

Advantech

Advantech SOM-5786 Manuel utilisateur

Advantech

Advantech ECU-P1528PE Manuel d'installation et d'exploitation

Advantech

Advantech PCE-2033 Manuel utilisateur

Advantech

Advantech TREK-550-A00E Manuel utilisateur

Advantech

Advantech PCE-7131 Manuel d'installation et d'exploitation

Advantech

Advantech AIMC-3421 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6185 Manuel utilisateur

Advantech

Advantech 3U Compact PCI Manuel utilisateur

Advantech

Advantech PCM-3864 Manuel d'installation et d'exploitation

Advantech

Advantech ECU-P1522LPE Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6742 Series Manuel d'installation et d'exploitation

Advantech

Advantech PCE-3026 Manuel d'installation et d'exploitation

Advantech

Advantech PPC-615W Manuel utilisateur

Advantech

Advantech EVA-X4300 Manuel utilisateur

Advantech

Advantech PCE-5B06V-04A1E Manuel d'installation et d'exploitation

Advantech

Advantech PCIE-1756 Manuel utilisateur

Advantech

Advantech ROM-5420 Manuel utilisateur

Advantech

Advantech MOS-1121Y Series Manuel utilisateur

Advantech

Advantech PCA-6180 Series Manuel utilisateur

Advantech

Advantech POC-615 Series Manuel utilisateur

Advantech

Advantech EPD-660 Manuel utilisateur

Advantech

Advantech PCL-841 Series Manuel utilisateur

Advantech

Advantech PCIE-1753 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur