Advantech PCA-6179 Manuel utilisateur
PCA-6179
Full-size socket 370 Intel®
Pentium® III processor-
based PCI/ISA-bus CPU
card
Copyright notice
This document is copyrighted, 2000, by Advantech Co., Ltd. All
rights are reserved. Advantech Co., Ltd. reserves the right to make
improvements to the products described in this manual at any time
without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this
manual is intended to be accurate and reliable. However, Advantech
Co., Ltd. assumes no responsibility for its use, nor for any in-
fringements upon the rights of third parties which may result from its
use.
Acknowledgements
• AWARD is a trademark of AWARD Software, Inc.
• IBM and PC are trademarks of International Business Machines
Corporation.
• Intel®and Pentium®III are trademarks of Intel Corporation.
• MS-DOS is a trademark of Microsoft Corporation.
• SMC is a trademark of Standard Microsystems Corporation.
• WinBond is a trademark of Winbond Corporation.
• SYMBIOS is a registered trademark of Symbios, Inc.
• ATI is a registered trademark of ATI Technologies, Inc.
• VIA is a registered trademark of VIA Technologies Inc.
All other product names or trademarks are the properties of their
respective owners.
Part No. 2006617910
2nd Edition Printed in Taiwan Nov. 2000
A Message to the Customer
Advantech customer services
Each and every Advantech product is built to the most exacting
specifications to ensure reliable performance in the harsh and
demanding conditions typical of industrial environments. Whether
your new Advantech equipment is destined for the laboratory or the
factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has
come to be known.
Your satisfaction is our primary concern. Here is a guide to
Advantech’s customer services. To ensure you get the full benefit of
our services, please follow the instructions below carefully.
Technical support
We want you to get the maximum performance from your products.
So if you run into technical difficulties, we are here to help. For the
most frequently asked questions, you can easily find answers in your
product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer,
gather all the information or questions that apply to your problem, and
with the product close at hand, call your dealer. Our dealers are well
trained and ready to give you the support you need to get the most
from your Advantech products. In fact, most problems reported are
minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech
engineers every business day. We are always ready to give advice on
application requirements or specific information on the installation
and operation of any of our products.
elbatnosirapmocseireS9716-ACP
ledoML9716-ACPV9716-ACPEV9716-ACPSV9716-ACPF9716-ACP
:UPC letnI
®
muitneP
®
073tekcoSIII ✓✓✓ ✓✓
:tespihcmetsyS A331orPollopAAIV ✓✓✓ ✓✓
:SOIB SOIBhsalFP&PdrawA ✓✓✓ ✓✓
:ehcaC2L )UPCno(BK652 ✓✓✓ ✓✓
:MARmetsyS.xaM
)stekcosnip-861x3(BG5.1 ✓✓✓ ✓✓
:evirDhgiHASI Am46otpu ✓✓✓ ✓✓
troPBSU 22 222
srotcennocEDIE2 ✓✓✓ ✓✓
:ksidetatsdiloS COD
©
0002 ✓✓✓ ✓✓
stroplellarap1,laires2 ✓✓✓ ✓✓
:AGV AGV/PGA
)LX4orPegaRITA( ✕✓ ✓ ✓ ✓
:NAL tenrehtET-esaB001/01
)C9318ketlaeR:tespihc( ✕✕✓ ✕✓
)598C35MYS(ISCS2artlU ✕✕✕ ✓✓
Product warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
two years from the date of purchase.
This warranty does not apply to any products which have been
repaired or altered by persons other than repair personnel authorized
by Advantech, or which have been subject to misuse, abuse, accident
or improper installation. Advantech assumes no liability under the
terms of this warranty as a consequence of such events.
If an Advantech product is defective, it will be repaired or replaced at
no charge during the warranty period. For out-of-warranty repairs,
you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, type of PC, CPU speed, Advantech products used, other
hardware and software used, etc.) Note anything abnormal and list
any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
material authorization) number from your dealer. This allows us to
process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
Initial Inspection
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 PCA-6179 socket 370 Pentium III®processor-based single board
computer
• 1PentiumIII®processor, (optional)1coolingfan,P/N:1759205400
• 1 PCA-6179 startup Manual
• 1CDdriverutilityandmanual(inPDFformat)
• 4 SCSI driver disks (optional)
• 1FDDcable,P/N:1701340703
• 2UDMA66HDDcables,P/N:1701400452
• 1printer(parallelport)cable&COMportcable kit, P/N: 1700060305
• 1ATX-to-PS/2powercable,P/N: 1700000450
• 1ivorycableforPS/2 keyboard and PS/2 mouse, P/N: 1700060202
• 1SCSIcable (optional),P/N1701060000
• 1USBcable (optional),P/N1700100170
If any of these items are missing or damaged, contact your distributor
or sales representative immediately.
We have carefully inspected the PCA-6179 mechanically and
electrically before shipment. It should be free of marks and scratches
and in perfect working order upon receipt.
As you unpack the PCA-6179, check it for signs of shipping damage.
(For example, damaged box, scratches, dents, etc.) If it is damaged or
it fails to meet the specifications, notify our service department or
your local sales representative immediately. Also notify the carrier.
Retain the shipping carton and packing material for inspection by the
carrier. After inspection, we will make arrangements to repair or
replace the unit.
Contents
Chapter 1 Hardware Configuration.............................. 1
1.1 Introduction........................................................................2
1.2 Features...............................................................................3
1.3 Specifications ......................................................................5
1.3.1 System.........................................................................5
1.3.2 Memory.......................................................................5
1.3.3 Input/Output ................................................................6
1.3.4 VGA interface .............................................................6
1.3.5 SCSI interface .............................................................6
1.3.6 Ethernet LAN ..............................................................6
1.3.7 Solid state disk ............................................................6
1.3.8 Industrial features .......................................................7
1.3.9 Mechanical and environmental specifications............7
1.4 Board Layout: Main Features ..........................................8
1.5 Jumpers and Connectors...................................................9
1.6 Board Layout: Jumper and Connector Locations .......11
1.7 Safety Precautions............................................................12
1.8 Jumper Settings................................................................13
1.8.1 How to set jumpers ...................................................13
1.8.2 CPU clock ratio setting (SW1) .................................13
1.8.4 CMOS clear (J1)................................................................15
1.8.5 Watchdog timer output (J2) ......................................15
1.8.5 DiskOnChip® 2000 Flash disk address select (SW3) ....16
1.9 System Memory................................................................18
1.9.1 Sample calculation: DIMM memory capacity................18
1.9.2 Supplementary information about DIMMs ..............19
1.10 Memory Installation Procedures ....................................20
1.11 Cache Memory .................................................................20
1.12 CPU Installation...............................................................21
Chapter 2 Connecting Peripherals ............................ 23
2.1 Primary (CN1) and Secondary (CN2) IDE Connectors24
2.2 Floppy Drive Connector (CN3).......................................25
2.3 Parallel Port (CN4) ..........................................................25
2.4 SCSI Connector (CN5) ....................................................26
2.5 USB Port (CN6) ................................................................27
2.6 VGA Connector (CN7) ....................................................27
2.7 10/100Base-T Ethernet Connector (CN8) ......................28
2.8 Serial Ports (CN9: COM1; CN10: COM2)....................28
2.9 PS/2 Keyboard and Mouse Connector (CN11) .............29
2.10 External Keyboard Connector (CN12) ..........................29
2.11 Infrared (IR) Connector (CN13) ....................................30
2.12 CPU Fan Connector (CN14) ...........................................30
2.13 Front Panel Connectors (CN16, CN17, CN18, CN19,
CN21 and CN22).........................................................................31
2.13.1 Keyboard lock and power LED (CN16) .................31
2.13.2 External speaker (CN17) ................................................31
2.13.3 Reset (CN18)...........................................................31
2.13.4 HDD LED (CN19) ..................................................32
2.13.5 ATX soft power switch (CN21)..............................32
2.14 ATX Power Control Connectors (CN20 and CN21).....32
2.14.1 ATX feature connector (CN20) and soft power
switch connector (CN21) ...................................................32
CN20 32
2.14.2 Controlling the soft power switch...........................33
Award BIOS Setup........................................................ 35
3.1 Introduction......................................................................36
3.2 Entering Setup..................................................................36
3.3 Standard CMOS Features...............................................37
3.4 Advanced BIOS Features ................................................38
3.4.1 Virus Warning..........................................................39
3.4.2 Quick Power On Self Test ........................................40
3.4.3 Boot Up Floppy Seek ................................................40
3.4.4 Boot Up NumLock Status .........................................40
3.4.5 Gate A20 Option .......................................................40
3.4.6 Typematic Rate Setting.............................................40
3.4.7 Typematic Rate (Chars/Sec) .....................................41
3.4.8 Typematic Delay (msec) ...........................................41
3.4.9 Security Option .........................................................41
3.4.10 OS Select for DRAM > 64MB................................41
3.4.11 Video BIOS Shadow ...............................................41
3.4.12 C8000-CBFFF Shadow / DC000-DFFFF Shadow .42
3.5 Advanced Chipset Features.............................................42
3.5.1 Memory Hole At 15 M ~ 16 M.................................43
3.5.2 AGP Aperture Size (MB)..........................................43
3.6 Integrated Peripherals.....................................................43
3.6.1 IDE HDD Block Mode .............................................43
3.6.2 IDE Primary Master/Slave PIO/UDMA Mode,
IDE Secondary Master/Slave PIO/UDMA Mode (Auto) ..44
3.6.3 Onboard FDC Controller ..........................................44
3.6.4 Onboard Serial Port 1 (3F8H/IRQ4).........................44
3.6.5 Onboard Serial Port 2 (2F8H/IRQ3).........................44
3.6.6 Onboard Parallel Port (378H/IRQ7) .........................44
3.6.7 Parallel Port Mode (ECP + EPP) ..............................44
3.6.8 ECP Mode Use DMA ...............................................45
3.7 Power Management Setup ..............................................45
3.7.1 Power Management ..................................................46
3.7.2 HDD Power Down ....................................................46
3.7.3 Soft-Off by PWR-BTTN...........................................46
3.7.4 Wakeup Event ...........................................................47
3.7.5 IRQs Activity Monitoring.........................................47
3.8 PnP/PCI Configurations..................................................48
3.9 PC Health Status ..............................................................48
3.10 Frequency Control ...........................................................49
3.11 Load Setup Defaults.........................................................49
3.12 Set Password.....................................................................49
3.13 Save & Exit Setup ............................................................50
3.14 Exit Without Saving.........................................................50
Chapter 4 AGP SVGA Setup....................................... 51
4.1 Before You Begin .............................................................52
4.2 Features.............................................................................52
4.3 Installation ........................................................................53
Chapter 5 LAN Configuration..................................... 55
5.1 Introduction......................................................................56
5.2 Features.............................................................................56
5.3 Driver Installation............................................................57
5.4 Windows 9X Drivers Setup
Procedure ....................................................................................58
5.5 Windows NT Drivers Setup Procedure..........................65
5.6 Windows 2000 Drivers Setup Procedure .......................70
Chapter 6 SCSI Setup and Configurations................ 77
6.1 Introduction......................................................................78
6.2 Before You Begin .............................................................78
6.3 Basic Rules for SCSI Host Adapter and Device Installa-
tion 79
6.4 Configuring the SCSI Adapter .......................................79
6.5 SCSI Terminators ............................................................80
6.6 SDMS Drivers...................................................................81
Appendix A Programming the Watchdog Timer....... 99
A.1 Programming the Watchdog Timer .............................100
Appendix B Pin Assignments ................................... 103
B.1 IDE Hard Drive Connector (CN1, CN2)......................104
B.2 Floppy Drive Connector (CN3).....................................105
B.3 Parallel Port Connector (CN4) .....................................106
B.4 SCSI Connector (CN5) ..................................................107
B.5 USB Connector (CN6) ...................................................108
B.6 VGA Connector (CN7) ..................................................108
B.7 Ethernet 10/100Base-T RJ-45 Connector (CN8).........109
B.8 COM1/COM2 RS-232 Serial Port (CN9, CN10).........109
B.9 Keyboard and Mouse Connnector (CN11) ..................110
Table des matières
Autres manuels Advantech Matériel informatique
Advantech
Advantech PCI-1752U Manuel utilisateur
Advantech
Advantech POC-824 Manuel utilisateur
Advantech
Advantech PCL-848A/B Manuel utilisateur
Advantech
Advantech PCIe-1674 Manuel utilisateur
Advantech
Advantech PPC-615W Manuel utilisateur
Advantech
Advantech IPC-610B Manuel utilisateur
Advantech
Advantech AMAX-5070 Manuel utilisateur
Advantech
Advantech SOM-4463D-S8B2E Manuel utilisateur
Advantech
Advantech PCI-1716 Manuel utilisateur
Advantech
Advantech MIO-4370 Manuel utilisateur
Advantech
Advantech AIMC-3421 Manuel d'installation et d'exploitation
Advantech
Advantech PPC-IPS Manuel utilisateur
Advantech
Advantech MIC-3365 Manuel utilisateur
Advantech
Advantech PCA-6011 Manuel d'installation et d'exploitation
Advantech
Advantech LGA 1700 Manuel utilisateur
Advantech
Advantech MIO-5377 Manuel d'installation et d'exploitation
Advantech
Advantech PCI-1710 Manuel utilisateur
Advantech
Advantech MIC-75M11 Manuel d'installation et d'exploitation
Advantech
Advantech MIO-5375 Manuel utilisateur
Advantech
Advantech PCE-5B12-07 Manuel d'installation et d'exploitation
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
