Advantech MIC-3365 Manuel utilisateur

Modular

Industrial

Computer

MIC-3365

6U-sized Intel Pentium III/Celeron CPU

board for CompactPCI

Preface and Table of Contents

This document is copyrighted, 2000. All rights are reserved. The

original manufacturer reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

Fast EtherChannel (FEC) is a trademark of Cisco Systems, Inc.

IBM, PS/2, OS/2, and VGA are trademarks of International Business

Machines Corporation.

Intel, Pentium, Celeron, and PRO/100+ are trademarks of Intel

Corporation.

Windows is a registered trademark of Microsoft Corporation.

NetWare is a trademark of Novell, Inc.

Symbios is a trademark of Symbios Logic Corporation.

PICMG™, CompactPCI™ and the PICMG™, and CompactPCI™

logos are trademarks of the PCI Industrial Computers Manufacturers

Group.

All other product names or trademarks are properties of their

respective owners.

CE Notification

The MIC-3365, developed by Advantech CO., LTD., has passed the

CE test for environment specification when shielded cables are used

for external wiring. We recommend the use of shielded cables.

Part No. 2006336500 1st Edition

Printed in aiwan May 2000

MIC-3365 User's Manual

Preface and Table of Contents

Prod ct warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

one year from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If

an Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any on-

screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair

and Replacement Order Card and a photocopy proof of purchase

date (such as your sales receipt) in a shippable container. A

product returned without proof of the purchase date is not eligible

for warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

MIC-3365 User's Manual

Packing List

Before installing your board, ensure that the following materials have

been received:

• One MIC-3365 all-in-one single board computer

• One utility CD-ROM disc

• One 6-pin mini-DIN to PS/2 keyboard and PS/2 mouse cable

• One heat sink plate

• One optional bracket for mounting on-board hard disk drive and

floppy disk drive

• One hard disk drive (IDE) interface cable (44-pin)

• One 26-pin FPC for floppy drive

• One warranty certificate

• This user's manual

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Technical S pport and Sales Assistance

If you have any technical questions about the MIC-3365 or any other

Advantech products, please visit our support website at:

•http://www.advantech.com.tw/support

For more information about Advantech's products and sales informa-

tion, please visit:

•http://www.advantech.com

Preface and Table of Contents

Contents

1. Hardware Config ration ................................................... 1

1.1 Introduction ..................................................................................... 2

1.2 Specifications ................................................................................... 3

1.2.1 Standard SBC functions ........................................................................ 3

1.2.2 VGA interface ....................................................................................... 4

1.2.3 Ultra 2 SCSI Interface (MIC-336 and MIC-336 F) ........................... 4

1.2.4 Mechanical and environmental specifications ....................................... 4

1.3 Function Block Diagram ................................................................ 5

1.4 Board Dimensions ........................................................................... 6

1.5 Jumpers ............................................................................................ 7

1. .1 Jumper Locations .................................................................................... 7

1. .2 Jumper Settings ....................................................................................... 8

1. .3 Clear CMOS (JP ) .................................................................................. 9

1.6 Connectors ..................................................................................... 10

1.7 Front Panel Connectors and Indicators ....................................... 12

1.8 Safety Precautions ......................................................................... 13

1.9 Installing SDRAM (DIMMs) ......................................................... 14

1.10 Installing CPU heat sink and HDD, FDD brackets ...................... 15

1.11 Software Support ........................................................................... 17

2. Connecting Peripherals ................................................. 19

2.1 IDE Device (CN12) ........................................................................ 20

2.2 Floppy Drive (CN11) ..................................................................... 20

2.3 VGA Display Connector (CN2) ..................................................... 21

2.4 Parallel Port Connector (CN1) .....................................................21

2.5 PS/2 Keyboard and Mouse Connector (CN7) .............................. 21

2.6 Serial Ports (CN13 and CN6) ........................................................ 21

2.7 Ethernet Configuration (CN4 and CN5) ...................................... 22

2.8 USB Connector (CN8) ................................................................... 22

2.9 Ultra 2 SCSI Interface ................................................................... 23

2.10 Card Installation .......................................................... 23Chapter 1

MIC-3365 User's Manual

3. Ethernet Software Config ration .................................. 25

3.1 Introduction ................................................................................... 26

3.2 Utility and Drivers ......................................................................... 26

3.3 Installation for Windows NT 4.0 ..................................................... 29

4. AGP VGA Set p ............................................................... 39

4.1 Introduction ................................................................................... 40

4.2 Installation of SVGA Driver ......................................................... 40

4.3 Installation for Windows NT 4.0 .................................................. 41

5. SCSI Software Config ration ........................................ 47

5.1 Introduction ................................................................................... 48

5.2 Utility and Drivers ......................................................................... 48

5.3 Installation for Windows NT 4.0 .................................................. 50

6. Award BIOS Set p ........................................................... 59

6.1 Introduction ................................................................................... 60

6.2 Entering Setup ............................................................................... 60

6.3 Standard CMOS Features ............................................................. 61

6.4 Advanced BIOS Features .............................................................. 62

6.5 CHIPSET Features Setup ............................................................. 65

6.6 Integrated Peripherals .................................................................. 65

6.7 Power Management Setup ............................................................ 66

6.8 PnP/PCI Configurations ............................................................... 67

6.9 Load Optimized Defaults .............................................................. 68

6.10 Set Password .................................................................................. 69

6.11 Save & Exit Setup ........................................................................... 70

6.12 Exit Without Saving ....................................................................... 71

Appendix A Pin Assignments ............................................ 73

A.1 VGA Display Connector (CN2) ..................................................... 74

A.2 Keyboard and Mouse Connnector (CN7) ..................................... 74

A.3 COM1 and COM2 Serial Port (CN13 and CN6) ......................... 75

A.4 USB Connector (CN8) ................................................................... 76

A.5 Ethernet RJ-45 Connector (CN4 and CN5) .................................. 76

Preface and Table of Contents

A.6 Parallel Port Connector (CN1) ..................................................... 77

A.7 IDE Connector (CN12) .................................................................. 78

A.8 Floppy Drive Connnector (CN11) ................................................ 79

A.9 System I/O Ports ............................................................................ 80

A.10 DMA Channel Assignments ........................................................... 81

A.11 Interrupt Assignments ................................................................... 81

A.12 1st MB Memory Map .................................................................... 82

A.13 J1 connector pin assignments ....................................................... 83

A.14 J2 connector pin assignments ....................................................... 84

A.15 J3 connector pin assignments ....................................................... 85

A.16 J4 connector pin assignments ....................................................... 86

A.17 J5 connector pin assignments ....................................................... 87

Appendix B Pin Assignments ............................................ 89

B.1 VGA Display Connector (CN2) ..................................................... 90

B.2 Keyboard and Mouse Connnector (CN7)..................................... 90

B.3 COM1 and COM2 Serial Port (CN13 and CN6) ......................... 91

B.4 USB Connector (CN8) ................................................................... 92

B.5 Ethernet RJ-45 Connector (CN4 and CN5).................................. 92

B.6 Parallel Port Connector (CN1) ..................................................... 93

B.7 IDE Connector (CN12) .................................................................. 94

B.8 Floppy Drive Connnector (CN11) ................................................ 95

B.9 System I/O Ports ............................................................................ 96

B.10 DMA Channel Assignments ........................................................... 97

B.11 Interrupt Assignments ................................................................... 97

B.12 1st MB Memory Map .................................................................... 98

B.13 J1 connector pin assignments ....................................................... 99

B.14 J2 connector pin assignments ..................................................... 100

B.15 J3 connector pin assignments ..................................................... 101

B.16 J4 connector pin assignments ..................................................... 102

B.17 J5 connector pin assignments ..................................................... 103

MIC-3365 User's Manual

Tables

able 1-1: MIC-3365 jumper descriptions ............................................ 7

able 1-2: Clear CMOS ......................................................................9

able 1-3: MIC-3365 connector descriptions ..................................... 10

able 2-1: MIC-3365 serial port default settings ................................ 22

able A-1: MIC-3365 CR display connector ..................................... 74

able A-2: MIC-3365 keyboard connector .......................................... 74

able A-3: MIC-3365 COM1 and COM2 serial port ............................ 75

able A-4: MIC-3365 USB1/USB2 connector .................................... 76

able A-5: MIC-3365 Ethernet RJ-45 connector ................................. 76

able A-6: MIC-3365 parallel port connector ...................................... 77

able A-7: MIC-3365 IDE connector .................................................. 78

able A-8: MIC-3365 floppy drive connector ....................................... 79

able A-9: System I/O ports ............................................................. 80

able A-10: DMA channel assignments .............................................. 81

able A-11: Interrupt assignments ...................................................... 81

able A-12: 1st MB memory map ....................................................... 82

able A-13: J1 connector pin assignments.......................................... 83

able A-14: J2 connector pin assignments.......................................... 84

able A-15: J3 connector pin assignments.......................................... 85

able A-16: J4 connector pin assignments.......................................... 86

able A-17: J5 connector pin assignments.......................................... 87

able B-1: MIC-3365 CR display connector ..................................... 90

able B-2: MIC-3365 keyboard connector .......................................... 90

able B-3: MIC-3365 COM1 and COM2 serial port ............................ 91

able B-4: MIC-3365 USB1/USB2 connector .................................... 92

able B-5: MIC-3365 Ethernet RJ-45 connector ................................. 92

able B-6: MIC-3365 parallel port connector ...................................... 93

able B-7: MIC-3365 IDE connector .................................................. 94

able B-8: MIC-3365 floppy drive connector ....................................... 95

able B-9: System I/O ports ............................................................. 96

able B-10: DMA channel assignments .............................................. 97

able B-11: Interrupt assignments ...................................................... 97

able B-12: 1st MB memory map ....................................................... 98

able B-13: J1 connector pin assignments.......................................... 99

Preface and Table of Contents

able B-14: J2 connector pin assignments........................................ 100

able B-15: J3 connector pin assignments........................................ 101

able B-16: J4 connector pin assignments........................................ 102

able B-17: J5 connector pin assignments........................................ 103

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Matériel informatique

Advantech

Advantech PCIE-1753 Manuel utilisateur

Advantech

Advantech MIC-75M20 Manuel d'installation et d'exploitation

Advantech

Advantech PCM-3753I Manuel utilisateur

Advantech

Advantech UNO-3300G Series Manuel utilisateur

Advantech

Advantech ASMB-927 Manuel d'installation et d'exploitation

Advantech

Advantech PCM-9591 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6180 Series Manuel utilisateur

Advantech

Advantech SKY-MXM-A500 Manuel utilisateur

Advantech

Advantech MIC-7 Series Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6145B Manuel utilisateur

Advantech

Advantech EWM-W192 Series Manuel utilisateur

Advantech

Advantech MIO-4370 Manuel utilisateur

Advantech

Advantech PCE-5130 Manuel utilisateur

Advantech

Advantech PCA-6743 Manuel d'installation et d'exploitation

Advantech

Advantech 3U Compact PCI Manuel utilisateur

Advantech

Advantech VEGA-3311 Manuel d'instructions

Advantech

Advantech SOM-5991 Manuel utilisateur

Advantech

Advantech PCIE-1803 Manuel utilisateur

Advantech

Advantech EPC-R6410 Manuel utilisateur

Advantech

Advantech UNO-238 V2 Manuel utilisateur

Advantech

Advantech PCE-7B17-00A1E Manuel d'installation et d'exploitation

Advantech

Advantech PCM-26D1DB Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6143P Manuel utilisateur

Advantech

Advantech HPC-6240 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur