ADTRAN TSU 100 Manuel utilisateur

TSU 100 & TSU 100e

User Manual

Part Numbers

1202052L1

1202052L2

January 1999

61202052L1-1C

Trademarks:

Windows is a registered trademark of Microsoft Corp.

T-WATCH Pro is a trademark of ADTRAN, Inc.

OpenView is a trademark of Hewlett Packard

SLC 96 is a trademark of AT&T

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

Phone: (256) 963-8000

Printed in USA.

iii

ADTRAN Year 2000 (Y2K) Readiness Disclosure

ADTRAN has established a Year 2000 program to ensure that our prod-

ucts will correctly function in the new millennium. ADTRAN warrants

that all products meet Y2K specifications regardless of model or revision.

Information about ADTRAN’s Y2K compliance program is available at

the following locations:

ADTRAN Web Site www.adtran.com

Product Matrix www.adtran.com/y2kfax.html

Faxback Document Line (256) 963-8200

Y2K plans and product certifications are listed in

the matrix.

Y2K Project Line (256) 963-2200

E-mail year2000@adtran.com

Notes provide additional useful information.

Cautions signify information that could prevent service

interruption.

Warnings provide information that could prevent damage to

the equipment or endangerment to human life.

FCC regulations require that the following information be provided to

the customer

1. This equipment complies with Part 68 of the FCC rules. The re-

quired label is attached to the bottom of the chassis.

2. An FCC compliant telephone cord and modular plug is provided

with this equipment. This equipment is designed to be connected

to the telephone network or premises wiring using a compatible

modular jack which is Part 68 compliant. See installation instruc-

tions for details.

3. If your TSU 100 causes harm to the telephone network, the Tele-

phone Company may discontinue your service temporarily. If

possible, they will notify you in advance. If advance notice is not

practical, you will be notified as soon as possible. You will be ad-

vised of your right to file a complaint with the FCC.

4. Your telephone company may make changes in its facilities,

equipment, operations, or procedures that could affect the prop-

er operation of your equipment. If they do, you will be given ad-

vance notice so as to give you an opportunity to maintain

uninterrupted service.

5. If you experience trouble with the equipment TSU 100, please

contact ADTRAN at (256) 963-8000 for repair/warranty informa-

tion. The telephone company may ask you to disconnect this

equipment from the network until the problem has been correct-

ed, or until you are sure the equipment is not malfunctioning.

6. This unit contains no user-serviceable parts.

7. The following information may be required when applying to

your local telephone company for leased line facilities.

Service Type REN/SOC FIC USOC

1.544 Mbps -SF 6.0N 04DU9-BN RJ-48C

1.544 Mbps - SF and B8ZS 6.0N 04DU9-DN RJ-48C

1.544 Mbps - ESF 6.0N 04DU9-1KN RJ-48C

1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ-48C

Federal Communications Commission Radio Frequency Interference

Statement

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to Part 15 of the FCC Rules. These lim-

its are designed to provide reasonable protection against harmful inter-

ference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio frequencies. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.

Shielded cables must be used with this unit to ensure compliance

with Class A FCC limits.

Changes or modifications to this unit not expressly approved by

the party responsible for compliance could void the user’s author-

ity to operate the equipment.

CANADIAN EMISSIONS REQUIREMENTS

This digital apparatus does not exceed the Class A limits for radio noise

emissions from digital apparatus as set out in the interference-causing

equipment standard entitled “Digital Apparatus,” ICES-003 of the De-

partment of Communications.

Cet appareil nuerique respecte les limites de bruits radioelectriques ap-

plicables aux appareils numeriques de Class A prescrites dans la norme

sur le materiel brouilleur: “Appareils Numeriques,” NMB-003 edictee

par le ministre des Communications.

vii

CANADIAN EQUIPMENT LIMITATIONS

The Industry Canada Certification label identifies certified equip-

ment. This certification means that the equipment meets certain

telecommunications network protective, operational, and safety

requirements. The Department does not guarantee the equipment

will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissi-

ble to be connected to the facilities of the local telecommunications com-

pany. The equipment must also be installed using an acceptable method

of connection. In some cases, the company's inside wiring associated

with a single line individual service may be extended by means of a cer-

tified connector assembly (telephone extension cord). The customer

should be aware that compliance with the above conditions may not pre-

vent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Cana-

dian maintenance facility designated by the supplier. Any repairs or al-

terations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company cause to re-

quest the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic

waterpipe system, if present, are connected together. This precaution

may be particularly important in rural areas.

Users should not attempt to make such connections themselves,

but should contact the appropriate electric inspection authority,

or an electrician, as appropriate.

The Load Number (LN) assigned to each terminal device denotes the

percentage of the total load to be connected to a telephone loop which is

used by the device, to prevent overloading. The termination on a loop

may consist of any combination of devices subject only to the equipment

that the total of the LNs of all devices does not exceed 100.

The ringer equivalence number (REN) assigned to each terminal adapter

is used to determine the total number of devices that may be connected

to each circuit. The sum of the RENs from all devices in the circuit should

not exceed a total of 5.0.

viii

AFFIDAVIT REQUIREMENTS FOR CONNECTION

TO DIGITAL SERVICES

• An affidavit is required to be given to the telephone company when-

ever digital terminal equipment without encoded analog content

and billing protection is used to transmit digital signals containing

encoded analog content which are intended for eventual conversion

into voiceband analog signals and transmitted on the network.

• The affidavit shall affirm that either no encoded analog content or

billing information is being transmitted or that the output of the de-

vice meets Part 68 encoded analog content or billing protection spec-

ifications.

• End user/customer will be responsible to file an affidavit with the

local exchange carrier when connecting unprotected CPE to a 1.544

Mbps or subrate digital services.

• Until such time as subrate digital terminal equipment is registered

for voice applications, the affidavit requirement for subrate services

is waived.

AFFIDAVIT FOR CONNECTION OF CUSTOMER PREMISES

EQUIPMENT TO 1.544 MBPS AND/OR SUBRATE DIGITAL

SERVICES

For the work to be performed in the certified territory of

_______________ (telco name)

State of ________________

County of ________________

I, _____________________________ (name), _____________________

(business address), ____________________ (telephone number) being

duly sworn, state:

I have responsibility for the operation and maintenance of the terminal

equipment to be connected to 1.544 Mbps and/or ________ subrate digi-

tal services. The terminal equipment to be connected complies with Part

68 of the FCC rules except for the encoded analog content and billing pro-

tection specifications. With respect to encoded analog content and billing

protection:

( )I attest that all operations associated with the establishment, mainte-

nance, and adjustment of the digital CPE with respect to analog content

and encoded billing protection information continuously complies with

Part 68 of the FCC Rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded

analog content or billing information which is intended to be decoded

within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and

is not under the control of the customer.

I attest that the operator(s)/maintainer(s) of the digital CPE responsible

for the establishment, maintenance, and adjustment of the encoded ana-

log content and billing information has (have) been trained to perform

these functions by successfully having completed one of the following

(check appropriate blocks):

( ) A. A training course provided by the manufacturer/grantee of the

equipment used to encode analog signals; or

( ) B. A training course provided by the customer or authorized repre-

sentative, using training materials and instructions provided by the man-

ufacturer/grantee of the equipment used to encode analog signals; or

( ) C. An independent training course (e.g., trade school or technical in-

stitution) recognized by the manufacturer/grantee of the equipment

used to encode analog signals; or

( ) D. In lieu of the preceding training requirements, the operator(s)/

maintainer(s) is (are) under the control of a supervisor trained in accor-

dance with _________ (circle one) above.

I agree to provide _________________ (telco's name) with proper docu-

mentation to demonstrate compliance with the information as provided

in the preceding paragraph, if so requested.

_________________________________Signature

_________________________________Title

_________________________________ Date

Transcribed and sworn to before me

This _____________________________________ (Month/Day/Year)

_________________________________

Notary Public

My commission expires:

_________________________________

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ADTRAN Matériel réseau

ADTRAN

ADTRAN 1200184L1 Manuel utilisateur

ADTRAN

ADTRAN HTU-C Manuel utilisateur

ADTRAN

ADTRAN Total Access 480 Manuel utilisateur

ADTRAN

ADTRAN Cable T1 ESF CSU ACE Manuel utilisateur

ADTRAN

ADTRAN Total Access 604 Guide de l'utilisateur

ADTRAN

ADTRAN T200 H2TU-R Mode d’emploi

ADTRAN

ADTRAN Total Access 1500 Total Reach DDS-DP Manuel du produit

ADTRAN

ADTRAN HDSL4 Mode d’emploi

ADTRAN

ADTRAN 1202295L1 Manuel utilisateur

ADTRAN

ADTRAN T3SU 300 Manuel utilisateur

ADTRAN

ADTRAN SFP Series Manuel utilisateur

ADTRAN

ADTRAN NetVanta 2000 Series Manuel utilisateur

ADTRAN

ADTRAN 1700900F2 Manuel utilisateur

ADTRAN

ADTRAN SDX 621i XGS-PON ONT Manuel utilisateur

ADTRAN

ADTRAN 1442940G1 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1700801G1 Manuel utilisateur

ADTRAN

ADTRAN Total Access 1500 Total Reach DDS-DP Manuel utilisateur

ADTRAN

ADTRAN Total Access 300 Series Manuel utilisateur

ADTRAN

ADTRAN DSU 56/64 Manuel utilisateur

ADTRAN

ADTRAN Total Access 3050 Manuel utilisateur

ADTRAN

ADTRAN NETVANTA UNIFIED COMMUNICATIONS DEMO KIT Manuel utilisateur

ADTRAN

ADTRAN Quad T1 IMA Mode d’emploi

ADTRAN

ADTRAN Total Access 362R Manuel du produit

ADTRAN

ADTRAN 1203060L1 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur