ADTRAN DSX 1 Manuel utilisateur

Autres manuels pour DSX 1

1

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels ADTRAN Matériel réseau

ADTRAN

ADTRAN TSU ACE Manuel de service

ADTRAN

ADTRAN EXPRESS 6503 Manuel utilisateur

ADTRAN

ADTRAN 1200221L1 Manuel utilisateur

ADTRAN

ADTRAN OC-12 Manuel utilisateur

ADTRAN

ADTRAN Stub Routing Manuel utilisateur

ADTRAN

ADTRAN TSU ACE Manuel utilisateur

ADTRAN

ADTRAN NetVanta 818 Manuel utilisateur

ADTRAN

ADTRAN Bluesocket 1700900F1 Manuel utilisateur

ADTRAN

ADTRAN Total Access 850 Manuel utilisateur

ADTRAN

ADTRAN QFO-C Mode d’emploi

ADTRAN

ADTRAN TRACER 5045 Guide de l'utilisateur

ADTRAN

ADTRAN TRACER 4x03 Manuel utilisateur

ADTRAN

ADTRAN HTU-C Manuel utilisateur

ADTRAN

ADTRAN Cable T1 ESF CSU ACE Manuel utilisateur

ADTRAN

ADTRAN QDFR Unit Mode d’emploi

ADTRAN

ADTRAN FXS/DPO/PLAR 1109403L2 Mode d’emploi

ADTRAN

ADTRAN Network Interface Module T1/FT1 Manuel utilisateur

ADTRAN

ADTRAN jobAid NETVANTA Manuel utilisateur

ADTRAN

ADTRAN DDM+ HTU-C M Manuel utilisateur

ADTRAN

ADTRAN T200 SHDSL Manuel utilisateur

ADTRAN

ADTRAN ATLAS 810 Plus Manuel utilisateur

ADTRAN

ADTRAN NetVanta Analog Modem Dial Backup Interface... Manuel utilisateur

ADTRAN

ADTRAN GPON 452 Manuel utilisateur

ADTRAN

ADTRAN 3.125 Gigabit Ethernet Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Configuring the

Total Access 900 Series

DSX-1 Interface

Quick Configuration Guide 61210916L1-42.4B March 2006

The DSX-1 interface is located on the rear of the Total Access 900 Series products. It is labeled

DSX-1 T1 0/1 on the ADSL units and DSX-1 T1 0/2 on all other units. The DSX-1 interface allows

DS0s to be provided to customer’s voice terminating equipment such as a PBX.

1. Start a VT100 terminal session to connect to your unit. If you need assistance, follow the

steps in the Total Access 900 Series Quick Configuration Guide (P/N 61210916L1-42.1).

2. Enter enable at the initial command prompt to access the Enable mode’s priviledged

commands.

3. Enter configure terminal to access the Global Configuration mode.

4. At the (config)# prompt, enter interface t1 0/x to access the interface configuration mode for

the DSX-1 interface.

5. Enter description 12 Network to PBX to provide a text description of the channels provided

to the DSX-1 interface.

6. Enter tdm-group 2 timeslots 1-12 to create a TDM group of timeslots 1 through 12 on the

DSX-1 interface (t1 0/x).

7. Enter no shutdown to activate the interface.

8. Enter exit to return to the Global Configuration mode.

Please note that these examples are given for your study and consideration only.

They are to help you reach a better understanding of the fundamental concepts

before configuring your application. It will be necessary for you to modify these

examples to match your network configuration. Please replace all underlined entries

(example) with your specific parameters.

Please refer to the ADTRAN Operating System (AOS) Command Reference

Guide on your ADTRAN OS Documentation CD for detailed information on

individual commands and subcommands pertaining to the Total Access 900 Series

products.

DSX-1 Interface

Configuring the DSX-1 Interface

The following steps demonstrate configuring the DSX-1 connection. In the following steps,

please substitute 1(ADSL units) or 2(all other units) for xin t1 0/x.

2 Technical Support 1-888-4ADTRAN (1-888-423-8726) 61210916L1-42.4B

9. Enter clock source internal to set the system clock source to internal timing.

10. Enter voice trunk T03 type t1-rbs supervision wink role network to create and set up this

trunk group for use with T1-RBS (DSX-1) interface.

11. Enter connect t1 0/x tdm-group 2 to allow the physical DSX-1 interface (t1 0/x) to pass the

tdm group to the end device.

12. Enter vad to enable Voice Activity Detection (VAD). VAD detects silence during a call to

reduce the bandwidth a call uses when voice packets are not being transmitting.

13. Enter end to exit the Global Configuration mode.

14. At the #prompt, enter copy running-config startup-config to save the running

configuration to the start-up configuration. The configuration must be saved to the unit’s

nonvolatile random access memory (NVRAM) to prevent the loss of configuration during a

power cycle.