ADT Ademco Vista 20P/PSIA Manuel utilisateur

For a detailed review of the entire system, please view the Ademco Vista –20P/PSIA system manual.

Arm and Disarm

Arm:

To arm in STAY mode, when you are not leaving the premises, enter your [security code] + [3].

To arm in AWAY mode, when you are leaving the premises, enter your [security code] + [2].

To arm in MAXMIMUM mode, when no one will be in or around the premises for long periods of time,

enter your [security code] + [4].

Disarm:

To disarm, enter you’re security code] + [1].

Quick Guide: Ademco Vista –20P/PSIA

Battery

The Ademco Vista 20P/PSIA operates on a UB 1270 battery.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by BAT or SYSTEM LO BAT

For instructions on replacing your battery, please visit our Battery Replacement Page.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [6] + [zone number].

Once the panel displays “BYPASS”, arm the system as usual.

To display all bypassed zones, press [6].

To unbypass a zone, disarm the system.

Change Time and Date

To change date and time settings, enter your [security code] + [#] + [6] + [3].

Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.

Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17.

Press [1] for PM or [0] for AM.

Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 23, 2015.

To exit, press [*] when the cursor is on the last digit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, enter your [security code] + [9].

To turn voice chime mode on and off, press [#] + [0] + [2] + [4]. Voice chime can only be activated

when chime mode is on.

Reset

To silence an alarm and to clear memory of an alarm event, enter the [security code] + [1] sequence twice.

Security Codes

Your system will allow different security codes for use by other users, however only the Master user or

Partition Programmer can assign user codes to users.

Users are also assigned an Authority Level, which defines the functions a particular user can and cannot

perform.

To add a user code, enter your [Master/Partition Programmer code] + [8] + [user number] + [new

user’s code].

To delete a user code, enter your [Master/Part. Prog code] + [8] + [user number] + [#] + [0].

To assign an authority level, enter your [Master/Part. Prog code] + [8] + [user number] + [#] + [1] +

[authority level].

Some user authority levels have been pre-programmed:

User Authority Level

Explanation

Code to assign to user

Standard

Can only perform security

function in assigned

partitions.

[0]

Arm Only

Can only arm the system.

[1]

Guest

Can arm the system in

assigned partitions, but

cannot disarm the system

unless the system was armed

with this code. Perfect for

babysitters, cleaners, etc.

[2]

Duress

Intended for use for when

you are forced to arm or

disarm the system against

your will.

[3]

Partition Programmer

Can do everything a Standard

user can do plus assigning

[4]

user codes to partitions.

For a complete list of use authority levels and partitions, please see the Ademco Vista –20P/PSIA system

manual.

Trouble Conditions

Trouble conditions are issues that require your attention and are indicated on your panel’s display by the

word CHECK + zone number and accompanied by beeping from the touchpad.

To silence Trouble Conditions beeping, check that the zone’s protected areas are closed and secure.

For wireless sensors, check that no environmental changes have blocked the wireless sensor.

If the problem is corrected, enter the [security code] + [OFF] sequence twice.

For a list of Trouble Conditions other than CHECK, please see your Ademco Vista –20P/PSIA system

manual.

Volume

The voice touchpad’s voice message volume can be adjusted. Adjusting the voice message volume also

adjusts the status beeps volume.

To adjust the volume, press [#] + [0] + [2].

Choose [3] to increase the volume and [6] to decrease the volume.

Table des matières

Autres manuels ADT Système de sécurité

ADT

ADT Security System 4112 Manuel utilisateur

ADT

ADT Safewatch Pro 3000 Mode d'emploi

ADT

ADT QuickConnect Manuel d'utilisation et d'entretien

ADT

ADT FOCUS CADET Manuel utilisateur

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Manuel utilisateur

ADT

ADT Smart Home PM360 Manuel utilisateur

ADT

ADT EZ Instructions d'installation et d'utilisation

ADT

ADT iCenter 8142ADT Manuel utilisateur

ADT

ADT ADT7AIO Series Manuel d'instructions

ADT

ADT On-The-Go Emergency Response System Manuel utilisateur

ADT

ADT SECURITY MANAGER 2000 Manuel utilisateur

ADT

ADT ADTHYBWL Series Manuel utilisateur

ADT

ADT SASW3000EN Manuel utilisateur

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Manuel utilisateur

ADT

ADT Fall Detection Pendant Manuel utilisateur

ADT

ADT Security System D7412 Manuel utilisateur

ADT

ADT ADTHYBWL Series Manuel utilisateur

ADT

ADT Safewatch Quick Connect Plus Manuel utilisateur

ADT

ADT SA10ADTEG Mode d'emploi

ADT

ADT NT9005 V1.0 NA Manuel utilisateur

ADT

ADT On-The-Go Emergency Response System Manuel utilisateur

ADT

ADT SAFEWATCH PRO Manuel utilisateur

ADT

ADT ADT7AIO Series Manuel d'instructions

ADT

ADT Smart Home PM360-R Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur