ADT Safewatch Quick Connect Plus Manuel utilisateur

For a detailed review of the entire system, please view the Safewatch Quick Connect Plus system manual.

Arm and Disarm

Arm:

To arm all sensors in STAY mode when you are not leaving the premises, enter your [security code] +

[STAY] or press and hold [STAY].

To arm all sensors in AWAY mode when you are leaving the premises, enter your [security code] +

[AWAY] or press and hold [AWAY].

Disarm:

To disarm, enter your [security code] + [OFF].

Battery

The Safewatch Quick Connect operates on the 7.2V Battery Pack.

Quick Guide: Safewatch Quick Connect Plus

Loss of AC power and use of backup battery power is indicated by No AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our Battery Replacement Page.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2-digit zone number].

To unbypass a zone, enter your [security code] + [OFF].

Change Time and Date

Enter your [Master code] + [FUNCTION] + [6] + [3].

When ‘SET TIME’ appears, enter the 2-digit hour, i.e., 18 for 6:00.

Press [ADD] and choose [1] for PM or [0] for AM, then press [ADD] again.

Enter the 2-digit minute, i.e., 14 for 6:14, then press [ADD].

Enter the 2-digit month, i.e., 03 for March, then press [ADD].

Enter the 2-digit day, i.e., 23 for March, 23, then press [ADD].

Enter the 2-digit year, i.e., 15 for March 23, 2015, then press ‘ADD] to accept the entry and exit Clock-

Setting mode. The keypad will beep 4 times in confirmation.

Chimes and Beeps

When your system is in chime mode, a chime will sound three beeps whenever a protected door/window is

opened.

To turn the door chime function on and off, press [FUNCTION] + [CHIME].

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] to clear the alarm event history.

Security Codes

You can program up to 6 additional user codes.

To add a user, enter the [Master code] + [CODE] + [new user number] + [new user code].

To erase a user, enter the [Master code] + [CODE] + [user number] and wait approximately three

seconds for the keypad to beep and verify.

Some user numbers have already been programmed:

Pre-programmed User

Function

User Number

Installer

All functions

[1]

Master

All functions

[2]

Babysitter

Only arm the system.

[7]

Duress

Secretly notifies the

monitoring center of duress.

[8]

For a complete list of User Code Attributes, please see the Safewatch Quick Connect Plus system manual.

Trouble Conditions

When a trouble condition is detected, the word ‘FAULT’ will be displayed on the panel.

The existing Trouble Condition keyword will appear on the display.

To silence the Trouble Condition beeps, enter your [security code] + [OFF].

For a list of possible Trouble Conditions, please see the Safewatch Quick Connect Plus system manual.

Volume

System announcements and status beep volume can be adjusted.

To adjust the volume level, press [FUNCTION] + [VOLUME] + [3]/[6].

[3] increases the volume by one level and [6] decreases the volume by one level.

To mute the volume level, press [FUNCTION] + [VOLUME] + [OFF].

Table des matières

Autres manuels ADT Système de sécurité

ADT

ADT Ademco Vista 20 Manuel utilisateur

ADT

ADT Keychain Remote Manuel utilisateur

ADT

ADT SA10ADTEG Mode d'emploi

ADT

ADT QuickConnect Manuel d'utilisation et d'entretien

ADT

ADT L5000 Lynx Manuel d'utilisation et d'entretien

ADT

ADT ACCORD XPC Manuel utilisateur

ADT

ADT EZ Instructions d'installation et d'utilisation

ADT

ADT FOCUS CADET Manuel utilisateur

ADT

ADT Ademco Vista 20P/PSIA Manuel utilisateur

ADT

ADT 3G Cellular Medical Alert System Manuel utilisateur

ADT

ADT Safewatch QuickConnect Plus Mode d'emploi

ADT

ADT Safewatch Plus Enterpreneur Security Systems Manuel utilisateur

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Instructions de montage

ADT

ADT 6160VPADT Instructions de montage

ADT

ADT Fall Detection Pendant Manuel utilisateur

ADT

ADT Galaxy 8 Manuel utilisateur

ADT

ADT NT9005 V1.0 NA Manuel utilisateur

ADT

ADT SAFEWATCH EZ Manuel utilisateur

ADT

ADT Health Fall Detection Pendant Manuel utilisateur

ADT

ADT DSC Impassa Manuel utilisateur

ADT

ADT ADTHYBWL Series Manuel utilisateur

ADT

ADT Smart Home PM360 Manuel utilisateur

ADT

ADT SECURITY MANAGER 2000 Manuel utilisateur

ADT

ADT ADT7AIO Series Instructions de montage

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur