ADLINK Technology NanoX-AL Manuel utilisateur

Leading EDGE COMPUTING

nanoX-AL

User’s Manual

COM Express Mini Size Type 10 Module with

Intel Atom®, Pentium®, Celeron® SoC

Manual Rev.: 1.3

Revision Date: July 16, 2020

Part Number: 50-1J088-1030

ii Preface

Preface

means in any form without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and

function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer

be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use

the product or documentation, even if advised of the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation

through compliance with the European Union's Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental

protection is a top priority for ADLINK. We have enforced measures to ensure that our products,

manufacturing processes, components, and raw materials have as little impact on the

environment as possible. When products are at their end of life, our customers are encouraged

to dispose of them in accordance with the product disposal and/or recovery programs

prescribed by their nation or company.

Battery Labels (for products with battery)

廢電池請回收

California Proposition 65 Warning

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene,

cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP,

styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause

cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other

reproductive harm. For more information go to www.P65Warnings.ca.gov.

Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or

registered trademarks of their respective companies.

Revision History

Revision Description Date By

1.0 Initial release 2018-04-02 JC

1.1 Correct LVDS specification 2019-11-18 JC

1.2 Update dual BIOS to “build option”; update Ethernet controller temperature support 2019-12-06 JC

1.3 Correct GBE0_MDI0- pin number 2020-07-16 JC

nanoX-AL

Preface iii

Table of Contents

Preface................................................................................................................................ii

List of Figures ..................................................................................................................vii

List of Tables...................................................................................................................viii

1. Introduction................................................................................................................1

2. Specifications............................................................................................................3

2.1. Core System ...............................................................................................................3

2.2. Expansion Busses ......................................................................................................3

2.3. Video...........................................................................................................................4

2.4. Audio...........................................................................................................................4

2.5. LAN.............................................................................................................................4

2.6. Multi I/O and Storage..................................................................................................4

2.7. Serial I/O on Module ...................................................................................................5

2.8. Trusted Platform Module (TPM) .................................................................................5

2.9. SEMA Board Controller ..............................................................................................5

2.10. Debug......................................................................................................................6

2.11. Power Specifications ...............................................................................................6

2.12. Power Consumption ................................................................................................6

2.13. Operating Temperatures .........................................................................................6

2.14. Environmental .........................................................................................................6

2.15. Specification Compliance ........................................................................................6

2.16. Operating Systems..................................................................................................7

2.17. Functional Diagram .................................................................................................8

2.18. Mechanical Drawing ................................................................................................9

3. Pinouts and Signal Descriptions............................................................................11

3.1. AB/CD Pin Definitions...............................................................................................11

3.2. Signal Description Terminology ................................................................................14

3.3. AB Signal Descriptions .............................................................................................15

3.3.1. Audio Signals ..................................................................................................................... 15

3.3.2. LVDS/eDP.......................................................................................................................... 15

3.3.3. DDI0 Channel ....................................................................................................................16

3.3.4. Gigabit Ethernet ................................................................................................................. 16

3.3.5. SATA.................................................................................................................................. 17

3.3.6. PCI Express ....................................................................................................................... 17

3.3.7. Express Card (Not supported) ........................................................................................... 18

3.3.8. LPC Bus ............................................................................................................................. 18

iv Preface

3.3.9. USB 1.1/2.0........................................................................................................................ 18

3.3.10. USB 3.0 Extension........................................................................................................... 19

3.3.11. USB Root Segmentation.................................................................................................. 20

3.3.12.

SPI (BIOS only)

................................................................................................................ 21

3.3.13. Miscellaneous .................................................................................................................. 21

3.3.14. SMBus.............................................................................................................................. 22

3.3.15. I2C Bus ............................................................................................................................ 22

3.3.16. General Purpose I/O (GPIO)............................................................................................ 22

3.3.17. Serial Interface Signals .................................................................................................... 23

3.3.18. Power And System Managemen

.................................................................................... 23

3.3.19. Power and Ground........................................................................................................... 24

4. Module Interfaces....................................................................................................25

4.1. Connector, Switch and LED Locations .....................................................................25

4.2. 40-pin Debug Connector...........................................................................................26

4.3. Status LEDs..............................................................................................................28

4.4. MIPI60 Debug Header (build option) ........................................................................29

4.5. Switch Settings .........................................................................................................30

5. Smart Embedded Management Agent (SEMA) .....................................................31

5.1. Board Specific SEMA Functions...............................................................................32

5.1.1. Voltages ............................................................................................................................. 32

5.1.2. Main Current ...................................................................................................................... 32

5.1.3. BMC Status........................................................................................................................ 32

5.1.4. Exception Codes................................................................................................................ 33

5.1.5. BMC Flags ......................................................................................................................... 33

6. System Resources ..................................................................................................35

6.1. System Memory Map................................................................................................35

6.2. I/O Map .....................................................................................................................35

6.3. Interrupt Request (IRQ) Lines...................................................................................37

6.4. PCI Configuration Space Map ..................................................................................40

6.5. PCI Interrupt Routing Map ........................................................................................41

6.6. SMBus Address Table ..............................................................................................42

7. BIOS Setup...............................................................................................................43

7.1. Menu Structure .........................................................................................................43

7.2. Main ..........................................................................................................................44

7.2.1. Main > BIOS Information ................................................................................................... 44

7.2.2. Main > System Information ................................................................................................ 44

7.2.3. Main > Board Information .................................................................................................. 45

7.2.4. Main >System Date/Time .................................................................................................. 45

nanoX-AL

Preface v

7.2.5. Main >Access Level........................................................................................................... 45

7.3. Advanced..................................................................................................................46

7.3.1. Advanced > CPU Configuration......................................................................................... 46

7.3.2. Advanced > Graphics Configuration .................................................................................. 48

7.3.3. Advanced > Power Management....................................................................................... 49

7.3.4. Advanced > System Management..................................................................................... 50

7.3.5. Advanced > Thermal Management.................................................................................... 50

7.3.6. Advanced > Watchdog Timer ............................................................................................ 51

7.3.7. Advanced > CSM Configuration ........................................................................................ 51

7.3.8. Advanced > Super IO Configuration.................................................................................. 51

7.3.9. Advanced > Serial Console Redirection ............................................................................ 53

7.3.10. Advanced > USB.............................................................................................................. 55

7.3.11. Advanced > Network........................................................................................................ 56

7.3.12. Advanced > Miscellaneous .............................................................................................. 56

7.3.13. Advanced > Driver Health................................................................................................ 56

7.3.14. Advanced > Trusted Computing ...................................................................................... 56

7.3.15. Advanced > Trusted Computing ...................................................................................... 57

7.4. Chipset......................................................................................................................58

7.4.1. Chipset > North Bridge ...................................................................................................... 58

7.4.2. Chipset > South Bridge...................................................................................................... 58

7.4.3. Chipset > Uncore Configuration......................................................................................... 58

7.4.4. Chipset > South Cluster Configuration .............................................................................. 60

7.5. Security.....................................................................................................................69

7.5.1. Security > Password Description ....................................................................................... 69

7.6. Boot ..........................................................................................................................70

7.6.1. Boot > Boot Configuration.................................................................................................. 70

7.6.2. Boot > FIXED BOOT ORDER Priorities............................................................................. 70

7.7. Save & Exit ...............................................................................................................71

8. BIOS Checkpoints, Beep Codes.............................................................................73

8.1. Status Code Ranges.................................................................................................74

8.2. Standard Status Codes.............................................................................................74

8.2.1. SEC Phase......................................................................................................................... 74

8.2.2. SEC Beep Codes............................................................................................................... 75

8.2.3. PEI Phase .......................................................................................................................... 75

8.2.4. PEI Beep Codes ................................................................................................................ 77

8.2.5. DXE Status Codes ............................................................................................................. 78

8.2.6. DXE Beep Codes............................................................................................................... 80

8.2.7. ACPI/ASL Checkpoint........................................................................................................ 80

8.3. OEM-Reserved Checkpoint Ranges......................................................................... 81

vi Preface

9. Mechanical Information...........................................................................................83

9.1. Board-to-Board Connectors......................................................................................83

9.2. Thermal Solution.......................................................................................................84

9.2.1. Heat Spreaders..................................................................................................................84

9.2.2. Heat Sinks.......................................................................................................................... 84

9.2.3. Installation.......................................................................................................................... 84

9.3. Mounting Methods ....................................................................................................86

9.4. Standoff Types..........................................................................................................87

Safety Instructions...........................................................................................................88

Getting Service.................................................................................................................89

nanoX-AL

Preface vii

List of Figures

Figure 1: nanoX-AL Functional Block Diagram ........................................................................................8

Figure 2: nanoX-AL Mechanical Drawing.................................................................................................9

Figure 3: nanoX-AL Connector, Switch and LED Locations ................................................................. 25

Figure 4: nanoX-AL and the DB40 Debug Module................................................................................ 25

Figure 5: cExpress Switch Locations .................................................................................................... 30

Figure 6: COM Express Mounting Methods ..........................................................................................86

Figure 7: COM Express Standoff Types................................................................................................ 87

viii Preface

List of Tables

Table 1: nanoX-AL Type 10 COM.0 Rev. 3.0 Pin Definitions ............................................................... 11

Table 2: 40-pin Debug Connector Pin Definition ................................................................................... 27

Table 3: nanoX-AL LED Descriptions.................................................................................................... 28

Table 4: MIPI60 Debug Header Pin Definition ...................................................................................... 29

Table 5: BIOS Select and Mode Configuration Switch Settings............................................................ 30

Table 6: SEMA Onboard Voltage Monitor ............................................................................................. 32

Table 7: SEMA BMC Status .................................................................................................................. 32

Table 8: SEMA Exception Codes .......................................................................................................... 33

Table 9: SEMA BMC Flags.................................................................................................................... 33

nanoX-AL

Introduction 1

1. Introduction

The nanoX-AL is a COM Express® COM.0 R3.0 Type 10 module supporting Intel Atom® processor E3900 series

system-on-chip (SoC). The nanoX-AL is specifically designed for customers who need optmized processing and

graphics performance with low power consumption in a long product life solution.

The nanoX-AL features the dual/quad core Intel Atom® processor E3900 series supporting non-ECC type DDR3L

single-channel or dual-channel memory at 1600/1867 MHz to provide excellent overall performance. Integrated

Intel® Gen9 LP Graphics includes features such as OpenGL 4.3, DirectX 12, OpenCL 2.0 and support for

H.265/HEVC, H.264, MPEG2, VC1, VP9, MVC, JPEG/MJPEG hardware decode. Graphics outputs include DDI

ports supporting HDMI/DVI/DisplayPort and single-channel 18/24-bit LVDS (eDP by build option). The nanoX-AL is

specifically designed for customers with balanced performance and power consumption requirements who want to

outsource the custom core logic of their systems for reduced development time.

The nanoX-AL has 2GB of soldered type non-ECC DDR3L memory (4GB and 8GB optional). In addition, onboard

eMMC memory (8GB/16GB/32GB) and SD signals are available as build options.

The nanoX-AL features a single onboard Gigabit Ethernet port, multiple PCIe lanes, USB 3.0 ports and USB 2.0

ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI

BIOS (dual BIOS by build option), supporting embedded features such as remote console, CMOS backup,

hardware monitor, and watchdog timer.

2 Introduction

This page intentionally left blank.

Table des matières

Autres manuels ADLINK Technology Matériel informatique

ADLINK Technology

ADLINK Technology cPCIS-6400U Series Manuel utilisateur

ADLINK Technology

ADLINK Technology ACL -6128 Manuel utilisateur

ADLINK Technology

ADLINK Technology Express-BASE Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-6630 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology nanoX-TCR Manuel utilisateur

ADLINK Technology

ADLINK Technology 6216-GL Series Manuel utilisateur

ADLINK Technology

ADLINK Technology EGX-TBT-A500 Manuel utilisateur

ADLINK Technology

ADLINK Technology SMARC NXP LEC-IMX8M Manuel utilisateur

ADLINK Technology

ADLINK Technology ETX-BT Manuel utilisateur

ADLINK Technology

ADLINK Technology Express-KL Manuel utilisateur

ADLINK Technology

ADLINK Technology MXM-AXe Manuel utilisateur

ADLINK Technology

ADLINK Technology ROScube-I Series Manuel utilisateur

ADLINK Technology

ADLINK Technology COM Express nanoX-TC Manuel utilisateur

ADLINK Technology

ADLINK Technology HPERC-KBL-MC Manuel utilisateur

ADLINK Technology

ADLINK Technology HDV62 Manuel utilisateur

ADLINK Technology

ADLINK Technology COM-HPC-sIDH Manuel utilisateur

ADLINK Technology

ADLINK Technology NuDAQ PCI-9222 Manuel utilisateur

ADLINK Technology

ADLINK Technology PXES-2301 Manuel utilisateur

ADLINK Technology

ADLINK Technology intel COM Express Express-TL Manuel utilisateur

ADLINK Technology

ADLINK Technology DLAP-301 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology EOS-1200 Manuel utilisateur

ADLINK Technology

ADLINK Technology MXE-5401 Manuel utilisateur

ADLINK Technology

ADLINK Technology ROScube Pico BSP Manuel utilisateur

ADLINK Technology

ADLINK Technology DLAP-211-JNX Series Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

ADLINK Technology nanoX-AL Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques