ADLINK Technology CPCI-9116 Manuel utilisateur

Leading EDGE COMPUTING

cPCI-9116

64-ch, 16-bit, 250KS/s Analog Input Card for

3U CompactPCI

User’s Manual

Manual Rev.: 1.2

Revision Date: July 7, 2020

Part No: 50-15002-1020

Leading EDGE COMPUTING

Revision History

Revision Release Date Description of Change(s)

1.10 2003-04-28 Initial release

1.2 2020-07-07 Update to current specification and

software support.

Preface iii

cPCI-9116

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsi-

bility to global environmental preservation

through compliance with the European Union's

Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic

Equipment (WEEE) directive. Environmental pro-

tection is a top priority for ADLINK. We have

enforced measures to ensure that our products,

manufacturing processes, components, and raw

materials have as little impact on the environment as possible.

When products are at their end of life, our customers are encour-

aged to dispose of them in accordance with the product disposal

and/or recovery programs prescribed by their nation or company.

Battery Labels (for products with battery)

ᘄ㟁ụㄳᅇᨲ

iv Preface

Leading EDGE COMPUTING

California Proposition 65 Warning

WARNING: This product can expose you to chemicals

including acrylamide, arsenic, benzene, cadmium,

Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4-

Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC,

and vinyl materials, which are known to the State of California to

cause cancer, and acrylamide, benzene, cadmium, lead, mercury,

phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and

vinyl materials, which are known to the State of California to cause

birth defects or other reproductive harm. For more information go

to www.P65Warnings.ca.gov.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

Table of Contents v

cPCI-9116

Table of Contents

Preface.................................................................................... iii

List of Figures....................................................................... vii

List of Tables.......................................................................... ix

1 Introduction ........................................................................ 1

1.1 Features............................................................................... 1

1.2 Applications ......................................................................... 2

1.3 Specifications....................................................................... 2

1.3.1 Analog Input ............................................................... 2

1.3.2 Digital I/O (DIO) .......................................................... 4

1.3.3 General Purpose Timer/Counter ................................ 4

1.3.4 General Specifications................................................ 4

1.4 Software Support ................................................................. 5

1.4.1 MAPS Core................................................................. 6

1.4.2 MAPS/LV, LabVIEW Support ..................................... 7

1.4.3 MAPS/C, C & C++ Support ........................................ 8

2 Installation .......................................................................... 9

2.1 What You Have.................................................................... 9

2.2 Unpacking.......................................................................... 10

2.3 cPCI-9116 Layout .............................................................. 11

2.4 PCI Configuration .............................................................. 12

2.4.1 Plug and Play ........................................................... 12

2.4.2 Configuration ............................................................ 12

2.4.3 Troubleshooting........................................................ 12

3 Signal Connections.......................................................... 13

3.1 Connectors and Pin Assignment ....................................... 13

3.1.1 100-pin SCSI-type Connector (J1) ........................... 14

vi Table of Contents

Leading EDGE COMPUTING

3.1.2 J1 Connector Legend ............................................... 15

3.2 Analog Input Signal Connection......................................... 15

3.2.1 Types of Signal Sources...........................................16

3.2.2 Input Configurations.................................................. 16

3.3 Digital I/O Connection ........................................................ 18

4 Operation Theory............................................................. 19

4.1 A/D Conversion Procedure ................................................ 19

4.1.1 Conversion in Software Polling Mode.......................19

4.1.2 Channel Gain Queue Configuration.......................... 20

4.2 Programmable Scan Acquisition Mode.............................. 21

4.2.1 Scan Timing and Procedure ..................................... 21

4.2.2 Channel Gain Queue Configuration.......................... 23

4.2.3 Trigger Modes........................................................... 24

4.3 A/D Data Transfer Modes .................................................. 33

4.4 Digital Input and Output ..................................................... 34

4.5 General Purpose Timer/Counter Operation ....................... 35

Important Safety Instructions.............................................. 37

Getting Service..................................................................... 40

List of Figures vii

cPCI-9116

List of Figures

Figure 1-1: ADLINK MAPS Architecture ....................................... 5

Figure 1-2: ADLINK Connection Explorer (ACE) .......................... 6

Figure 1-3: ACE Soft Front Panel ................................................. 7

Figure 2-1: PCB Layout of the cPCI-9116 .................................. 11

Figure 3-1: J1 Pin Assignments .................................................. 14

Figure 3-2: Single-ended Mode and Floating sources ................ 16

Figure 3-3: Ground-referenced source and differential input ...... 17

Figure 3-4: Floating source and differential input........................ 17

Figure 3-5: Ground-referenced source & U_CMMD connections18

Figure 3-6: Digital I/O Connection............................................... 18

Figure 4-1: Scan Timing.............................................................. 22

Figure 4-2: Pre-trigger (trigger occurs after M scans)................. 25

Figure 4-3: Pre-trigger (trigger with scan is in progress)............. 25

Figure 4-4: Pre-trigger with M_enable = 0 (before M scans) ...... 26

Figure 4-5: Pre-trigger with M_enable = 1 .................................. 27

Figure 4-6: Middle trigger with M_enable = 1.............................. 28

Figure 4-7: Middle trigger (trigger with scan is in progress)........ 29

Figure 4-8: Post trigger ............................................................... 30

Figure 4-9: Delay trigger ............................................................. 31

Figure 4-10: Post trigger with re-trigger ........................................ 32

Figure 4-11: General-purpose Timer/Counter model.................... 35

Figure 4-12: Mode 0 Operation..................................................... 36

Figure 4-13: Mode 1 Operation..................................................... 36

viii List of Figures

Leading EDGE COMPUTING

This page intentionally left blank.

List of Tables ix

cPCI-9116

List of Tables

Table 3-1: J1 Connector Legend .................................................... 15

x List of Tables

Leading EDGE COMPUTING

This page intentionally left blank.

Autres manuels pour cPCI-9116

Table des matières

Autres manuels ADLINK Technology Matériel informatique

ADLINK Technology

ADLINK Technology cPCI-6525 Manuel utilisateur

ADLINK Technology

ADLINK Technology ETX-EV133 Manuel utilisateur

ADLINK Technology

ADLINK Technology MXM-AXe Manuel utilisateur

ADLINK Technology

ADLINK Technology aTCA-9710 Manuel utilisateur

ADLINK Technology

ADLINK Technology Express-KL2 Manuel utilisateur

ADLINK Technology

ADLINK Technology COM-HPC Manuel utilisateur

ADLINK Technology

ADLINK Technology NuDAQ ACL-8454 Manuel utilisateur

ADLINK Technology

ADLINK Technology Com Express nanoX-BT Manuel utilisateur

ADLINK Technology

ADLINK Technology SMARC MODULE LEC-EL Manuel du propriétaire

ADLINK Technology

ADLINK Technology SMARC NXP LEC-IMX8M Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-6636 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-7300A Manuel utilisateur

ADLINK Technology

ADLINK Technology EGX-MXM-A1000 Manuel utilisateur

ADLINK Technology

ADLINK Technology SMARC LEC-MTK-I1200 Manuel utilisateur

ADLINK Technology

ADLINK Technology aTCA-9300 Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-840 DV Manuel utilisateur

ADLINK Technology

ADLINK Technology VPX3-TL Series Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3520 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology Q7-BT Manuel d'utilisation et d'entretien

ADLINK Technology

ADLINK Technology cPCI-6530 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology VPX3001 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology PXES-2301 Manuel utilisateur

ADLINK Technology

ADLINK Technology nanoX-TCR Manuel utilisateur

ADLINK Technology

ADLINK Technology intel COM Express Express-TL Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

ADLINK Technology cPCI-9116 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques