ACTi Z41 Manuel utilisateur

Outdoor Zoom Bullet

Hardware Manual

Z41, Z42

Ver. 2020/04/10

www.acti.com

Hardware Manual

Table of Contents

Precautions 3

Safety Instructions ...........................................................................5

Introduction 6

List of Models....................................................................................6

Package Contents.............................................................................7

Physical Description ........................................................................8

Mounting Options.............................................................................9

Installation Procedures 10

Step 1: Prepare for Installation......................................................10

Step 2: Route the Cables ............................................................... 11

Step 3: Mount the Camera .............................................................12

Step 4: Connect and Manage the Cables......................................13

Using the Cable Gland.................................................................13

Using a Power Adapter (Optional)................................................15

Step 5: Connect to Network...........................................................16

Step 6: Access the Camera Live View........................................... 16

Step 7: Adjust the Viewing Angle and Orientation.......................16

Accessing the Camera 17

Configure the IP Addresses........................................................... 17

Using DHCP Server to Assign IPAddresses................................17

Using the Default Camera IPAddress..........................................18

Access the Camera.........................................................................20

www.acti.com

Hardware Manual

Precautions

Read these instructions

You should read all the safety and operating instructions before using this product.

Heed all warnings

You must adhere to all the warnings on the product and in the instruction manual. Failure to follow

the safety instruction given may directly endanger people, cause damage to the system or to

other equipment.

Servicing

Do not attempt to service this video device yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Trademarks

All names used in this manual are probably registered trademarks of respective companies.

Liability

Every reasonable care has been taken during the writing of this manual. Please inform your local

office if you find any inaccuracies or omissions. We cannot be held responsible for any

typographical or technical errors and reserve the right to make changes to the product and

manuals without prior notice.

www.acti.com

Hardware Manual

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Caution: The user is cautioned that changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own

expense.

LVD / EMC Directive

This product complies with the European Low Voltage Directive 2014/35/EU and

EMC Directive 2014/30/EU.

WEEE Directive–2012/19/EU

The product this manual refers to is covered by the Waste Electrical & Electronic

Equipment (WEEE) Directive and must be disposed of in a responsible manner.

Battery Directive-2013/56/EC

Battery in the product complies with the European Battery Directive

2013/56/EC.For proper recycling,return the battery to your supplier or to a

designated collection point.

www.acti.com

Hardware Manual

Safety Instructions

Cleaning

Disconnect this video product from the power supply before cleaning.

Attachments

Do not use attachments not recommended by the video product manufacturer as they may cause

hazards.

Water and Moisture

Install other devices (such as PoE injector, alarm, etc.) that will be used with the camera in a dry

place protected from water.

Servicing

Do not attempt to service this video product yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Damage Requiring service

Disconnect this video product from the power supply immediately and refer servicing to qualified

service personnel under the following conditions.

1) When the power-supply cord or plug is damaged

2) If liquid has been spilled, or objects have fallen into the video product.

3) If the video product has been directly exposed to rain or water.

4) If the video product does not operate normally by following the operating Instructions in this

manual. Adjust only those controls that are covered by the instruction manual, as an improper

adjustment of other controls may result in damage, and will often require extensive work by a

qualified technician to restore the video product to its normal operation.

Safety Check

Upon completion of any service or repairs to this video product, ask the service technician to

perform safety checks to determine if the video product is in proper operating condition.

Never look at the transmit laser while the power is on. Never look

directly at the fiber ports and the fiber cable ends when they are

powered on.

Use of controls or adjustments to the performance or procedures

other than those specified herein may result in hazardous laser

emissions.

www.acti.com

Hardware Manual

Introduction

List of Models

This hardware manual contains the following models:

Z41

2MP Zoom Bullet with D/N, Adaptive IR, Superior WDR, SLLS, 4.3x

Zoom lens

Z42

4MP Zoom Bullet with D/N, Adaptive IR, Superior WDR, SLLS, 4.3x

Zoom lens

www.acti.com

Hardware Manual

Package Contents

Check if the camera package comes with the following items:

Camera

Cable Gland

with Rubber and Washer

Mounting Screw Kit

Drill Template

Quick Guide &

Warranty Card

IMPORTANT: When the camera is taken out from the box, the lens cover is covered by a thin film.

DO NOT remove this film. It is used to protect the lens cover from scratches or fingerprint marks

which may happen during installation. Remove this film only after the camera is securely installed

and all connections are complete.

Drill Template

Warranty Card

www.acti.com

Hardware Manual

Physical Description

Item

Description

DC 12V Power

Input

In case the camera is connected to a non-PoE (Power over

Ethernet) switch, use this connector to connect the camera to an

external power adapter (not included). See Using a Power

Adapter (Optional) on page 15 for more information.

Ethernet Port

Connects to a network using an Ethernet cable with RJ-45

connector.

Memory Card Slot

Insert a memory card (not included) into the slot for local

recording purposes.

www.acti.com

Hardware Manual

Mounting Options

Select the most suitable solution for your installation environment. The camera can be mounted

by either of the following methods:

Mount Types

Accessories

Surface Mount

Suitable when mounting the camera directly on walls or ceilings without

additional mounting accessories. See Installation Procedures on page

10 for more information.

An additional junction box can be used with the camera for cable

management. Contact sales to purchase.

Pole mount

Suitable when installing the camera on a pole. The Pole mount (optional

accessory set) is required for this type of installation.

NOTE:

For more information about the mounting solutions and accessories, please check the

Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).

The above mounting accessories are not included in the package. Contact your sales

agents to purchase.

www.acti.com

Hardware Manual

Installation Procedures

This section describes procedures in mounting the camera on a flat surface.

NOTE: The camera images on this documentation are for reference only and may be different

from the actual camera.

Step 1: Prepare for Installation

1. Before installing the camera, prepare other accessories required for installation. In case of

using a memory card for local recording, insert the memory card at this point.

2. Determine whether the cable will go through a hole on the surface or be routed along the

surface. Note also the direction to which the cable will be routed to attach the bundled drill

template on the surface according to the direction of the cable.

3. Drill the screw holes. Depending on the material of the surface where the camera will be

installed, it may be necessary to drill the four (4) screw holes and use the supplied screw tox.

Micro SD slot

Use a Ø6-6.5 mm drill bit to drill 30 mm-

depth guide holes according to the

positions marked by the sticker.

Knock the plastic anchors into

the guide holes and ensure that

they are tightened up.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ACTi Caméra de sécurité

ACTi

ACTi Q115 Manuel utilisateur

ACTi

ACTi VER. 061030 CAM-6500 Manuel utilisateur

ACTi

ACTi D3 series Manuel utilisateur

ACTi

ACTi I93 Manuel utilisateur

ACTi

ACTi TCM-5311 Manuel utilisateur

ACTi

ACTi ACM-1230 Series Manuel utilisateur

ACTi

ACTi VMGB-370 Manuel utilisateur

ACTi

ACTi VMGB-200 Manuel utilisateur

ACTi

ACTi E31A Manuel utilisateur

ACTi

ACTi B4 Series Manuel utilisateur

ACTi

ACTi D41A Manuel utilisateur

ACTi

ACTi VMGB-351 Manuel utilisateur

ACTi

ACTi CAM-6600 Series Instructions d'utilisation

ACTi

ACTi ACM-3011 Instructions d'utilisation

ACTi

ACTi I91 Manuel utilisateur

ACTi

ACTi Q960 Manuel utilisateur

ACTi

ACTi ACM-3401 Series Instructions d'utilisation

ACTi

ACTi CAM-6600 Series Manuel utilisateur

ACTi

ACTi A956 Manuel utilisateur

ACTi

ACTi D9 Series Manuel utilisateur

ACTi

ACTi TCM-1231 Series Instructions d'utilisation

ACTi

ACTi D52 Manuel utilisateur

ACTi

ACTi E77 Manuel utilisateur

ACTi

ACTi D21FA Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur