ACTi Z39 Manuel utilisateur
Outdoor Mini Bullet
Hardware Manual
Z39, Z310, Z315
Ver. 2023/06/15
www.acti.com
Hardware Manual
2
Table of Contents
Precautions 3
Safety Instructions..................................................................................... 6
Introduction 7
List of Models............................................................................................ 7
Package Contents ...................................................................................... 8
Physical Description .................................................................................. 9
Mounting Options ....................................................................................10
Installation Procedures 11
Step 1: Prepare for Installation.................................................................11
Step 2: Route the Cables...........................................................................12
Step 3: Mount the Camera .......................................................................13
Step 4: Connect and Manage the Cables...................................................14
Using the Cable Gland.................................................................14
Using a Power Adapter (Optional)................................................17
Step 5: Connect to Network .....................................................................17
Step 6: Access the Camera Live View........................................................18
Step 7: Adjust the Viewing Angle and Orientation....................................18
Accessing the Camera 19
Configure the IP Addresses.......................................................................19
Using DHCP Server to Assign IP Addresses................................19
Using the Default Camera IP Address..........................................20
Access the Camera ...................................................................................22
www.acti.com
Hardware Manual
3
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to follow
the safety instruction given may directly endanger people, cause damage to the system or to other
equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your local
office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
Usage
•Use a power adapter or a PoE device that meets requirements. Otherwise, the device may
be damaged.
•Make sure the length of the power cable between the power adapter and the camera is not
too long, otherwise the voltage of the camera is lowered, causing the camera to work
abnormally. If it is required to lengthen the power cable, lengthen the cable between the
power adapter and the mains.
•Do not overbend the cables during the installation, otherwise, poor cable contact may cause
malfunction.
•When connecting to an external interface, use an existing connection terminal, and ensure
that the cable terminal (latch or clamp) is in good condition and properly fastened. Ensure
that the cable is not tense during mounting, with a proper margin reserved to avoid poor port
contact or loosening caused by shock or shake.
www.acti.com
Hardware Manual
4
•During transportation, special attention is required to protect the transparent dome cover
from friction, scratch and stain, etc. Do not remove the protective film from the cover until
mounting is finished. Remove the protective film before powering on the device.
•Contact professionals for maintenance information. Do not attempt to dismantle the device
by yourself. We shall not assume any responsibility for problems caused by unauthorized
repair or maintenance.
Maintenance
⚫If there is dust on the front glass surface, remove the dust gently using an oil-free brush or a
rubber dust blowing ball.
⚫If there is grease or a dust stain on the front glass surface, clean the glass surface gently from
the center outward using anti-static gloves or an oil-free cloth. If the grease or the stain still
remains, use anti-static gloves or an oil-free cloth dipped with detergent and clean the glass
surface gently until it is clean.
⚫Do not use organic solvents (such as benzene and alcohol) to clean the transparent dome
cover.
www.acti.com
Hardware Manual
5
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
LVD / EMC Directive
This product complies with the European Low Voltage Directive 2014/35/EU and
EMC Directive 2014/30/EU.
WEEE Directive–2012/19/EU
The product this manual refers to is covered by the Waste Electrical & Electronic
Equipment (WEEE) Directive and must be disposed of in a responsible manner.
Battery Directive-2013/56/EC
Battery in the product complies with the European Battery Directive
2013/56/EC.For proper recycling,return the battery to your supplier or to a
designated collection point.
www.acti.com
Hardware Manual
6
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may cause
hazards.
Water and Moisture
Install other devices (such as PoE injector, alarm, etc.) that will be used with the camera in a dry
place protected from water.
Servicing
Do not attempt to service this video product yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the video product has been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating Instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as an improper
adjustment of other controls may result in damage, and will often require extensive work by a
qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine if the video product is in proper operating condition.
•Never look at the transmit laser while the power is on. Never look
directly at the fiber ports and the fiber cable ends when they are
powered on.
•Use of controls or adjustments to the performance or procedures
other than those specified herein may result in hazardous laser
emissions.
www.acti.com
Hardware Manual
7
Introduction
List of Models
This hardware manual contains the following models:
Z39
4MP Mini Bullet with D/N, Adaptive IR, Superior WDR, SLLS,
Fixed Lens
Z310
8MP Mini Bullet with D/N, Adaptive IR, Superior WDR, SLLS,
Fixed Lens
Z315
5MP Mini Bullet with D/N, Adaptive IR, Superior WDR, SLLS,
Fixed Lens
www.acti.com
Hardware Manual
8
Package Contents
Check if the camera package comes with the following items:
Camera
Cable Gland
with Rubber and Washer
Mounting Screw Kit
Drill Template
Wrench
Drill Template
Quick Guide &
Warranty Card
IMPORTANT: When the camera is taken out from the box, the lens cover is covered by a thin film.
DO NOT remove this film. It is used to protect the lens cover from scratches or fingerprint marks
which may happen during installation. Remove this film only after the camera is securely installed
and all connections are complete.
Drill Template
Warranty Card
www.acti.com
Hardware Manual
9
Physical Description
Item
Description
1
DC 12V Power
Input
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adapter (not included). See Using a Power
Adapter (Optional) on page 17 for more information.
CAUTION: If the power cable will not be used, make sure to
insert the plug to cover the connector.
2
Ethernet Port
Connects to a network using an Ethernet cable with RJ-45
connector.
3
Built-in
Microphone
Receives audio input.
4
Memory Card Slot
Insert a memory card (not included) into the slot for local
recording purposes.
5
www.acti.com
Hardware Manual
10
Mounting Options
Select the most suitable solution for your installation environment. The camera can be
mounted by either of the following methods:
Mount Types
Accessories
Surface Mount
Suitable when mounting the camera directly on walls or ceilings without
additional mounting accessories. See Installation Procedures on page
11 for more information.
An additional junction box can be used with the camera for cable
management. Contact sales to purchase.
Pole mount
Suitable when installing the camera on a pole. The Pole mount (optional
accessory set) is required for this type of installation.
NOTE:
•For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).
•The above mounting accessories are not included in the package. Contact your sales
agents to purchase.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels ACTi Caméra de sécurité
ACTi
ACTi TCM-7411 Instructions d'utilisation
ACTi
ACTi D7 Series Manuel utilisateur
ACTi
ACTi CAM-7200 series Instructions d'utilisation
ACTi
ACTi A41 Manuel utilisateur
ACTi
ACTi B612 Manuel utilisateur
ACTi
ACTi CAM-6110 Manuel utilisateur
ACTi
ACTi A956 Manuel utilisateur
ACTi
ACTi E98 Manuel utilisateur
ACTi
ACTi TCM-1231 Series Instructions d'utilisation
ACTi
ACTi E924 Manuel utilisateur
ACTi
ACTi Z810 Manuel utilisateur
ACTi
ACTi B54 Manuel utilisateur
ACTi
ACTi B412 Manuel utilisateur
ACTi
ACTi KCM-5211E Instructions d'utilisation
ACTi
ACTi ACM-3300 Instructions d'utilisation
ACTi
ACTi ACM-3001 Instructions d'utilisation
ACTi
ACTi B913 Manuel utilisateur
ACTi
ACTi A425 Manuel utilisateur
ACTi
ACTi ACM-1232 Instructions d'utilisation
ACTi
ACTi E41B Manuel utilisateur
