Acrosser Technology ACM-XD15B7 Manuel utilisateur
ACM-XD15B7
2Acrosser Technology Co., Ltd.
Disclaimer
For the purpose of improving reliability, design and function, the information in
this document is subject to change without prior notice and does not represent a
commitment on the part of Acrosser Technology Co., Ltd.
In no event will Acrosser Technology Co., Ltd. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to use the
product or documentation, even if advised of the possibility of such damages.
Copyright
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic,
or other means in any form without prior written permission of Acrosser Technology
Co., Ltd.
Trademarks
The product names appear in this manual are for identication purpose only. The
trademarks and product names or brand names appear in this manual are the
property of their respective owners.
Purpose
This document is intended to provide the information about the features and use of
the product.
Audience
The intended audiences are technical personnel, not for general audiences.
To read this User Manual on your smart phone, you will have to install an
APP that can read PDF le format rst. Please nd the APP you prefer from
the APP Market.
Ver: 100-001
Date: Dec. 30, 2019
ACM-XD15B7
3
www.acrosser.com
Table of Contents
1. Introduction ...................................................................5
1.1. Specications ............................................................................................................. 6
1.2. Packing List ................................................................................................................ 7
1.3. Block Diagram ............................................................................................................ 8
2. Hardware Information ...................................................9
2.1. Mainboard Layout....................................................................................................... 9
2.2. Connector Pin Denition........................................................................................... 10
2.2.1. CN1, CN2 Pin Assignments .......................................................................... 10
2.3. Board Dimension...................................................................................................... 14
3. BIOS Settings...............................................................15
3.1. Main Setup ............................................................................................................... 15
3.2. Advanced Setup ....................................................................................................... 16
3.2.1. Serial Port Console Redirection .................................................................... 17
3.3. Chipset Setup........................................................................................................... 18
3.3.1. PCH SATA Conguration............................................................................... 18
3.4. Boot Setup................................................................................................................ 19
3.5. Security Setup .......................................................................................................... 19
3.6. Save & Exit Setup..................................................................................................... 20
4. Software Installation and Programming Guide...........21
4.1. Introduction............................................................................................................... 21
4.1.1. Environment .................................................................................................. 21
4.1.2. GPIO and Watchdog ..................................................................................... 21
4.2. API List and Descriptions ......................................................................................... 21
4.2.1. General ......................................................................................................... 21
4.2.2. GPIO ............................................................................................................. 22
4.2.3. Watchdog ...................................................................................................... 22
5. FAQ ...............................................................................24
Q 1. Where can I nd the serial number of this product?................................................. 24
ACM-XD15B7
5
www.acrosser.com
1. Introduction
COM Express Concept
COM Express is an open industry standard dened specically for COMs (Computer-
on-Modules). Its creation provides the ability to transfer from legacy interfaces to the
newest technologies available today.
COM Express modules are available in three form factors:
• COM Express Extended Module: 155mm x 110mm
• COM Express Basic Module: 125mm x 95mm
• COM Express Compact Module: 95mm x 95mm
Type 7 COM Express Basic Module
Type 7 COM Express Basic Module (Enhanced Version)
An Added Surge Protection Circuit
An Added CPLD Control Circuit
Pulled Up the 3.3V, 5V & 12V’s Capacitance value for Enhancing
Endurance
The ACM-XD15B7 utilizes the Type 7 COM Express Basic Module that fully
complies with the PICMG (PCI Industrial Computer Manufacturers Group), COM.0
R3.0 specication and offers extra ordinarily high bandwidth for high-speed data
transmission through two high-performance 220-pin connectors.
The ACM-XD15B7 supports Intel Xeon D SoC(Broadwell-DE) processor. The basic
I/O ports support VGA, 4 x USB 2.0, 4 x USB 3.0, COM, 2 x 10GbE LAN, and GPIO
with optional carrier board ADB-XD15MB.
Type Connector
Rows
PCI Express
Lanes
PEG PCI IDE
SATA
LAN Video Serial Other Features Note
1AB (Single) 6 No No No 4 1 LVDS A & B, VGA Legacy
2AB & CD
(Double) 22 Yes Yes 141LVDS A & B, VGA, PEG/
SDVO Legacy
3AB & CD
(Double) 22 Yes Yes No 4 3 LVDS A & B, VGA, PEG/
SDVO Legacy
4AB & CD
(Double) 32 Yes No 1 4 1 LVDS A & B, VGA, PEG/
SDVO Legacy
5AB & CD
(Double) 32 Yes No No 4 3 LVDS A & B, VGA, PEG/
SDVO Legacy
6AB & CD
(Double) 24 Yes No No 4 1 LVDS A & B, VGA, 3 x
DDI
2 TX/RX serial pairs with
option to overlay CAN
interface on 1 port
USB 3.0
7AB & CD
(Double) 32
Yes,
for 16
lans
Yes 2 None
2 TX/RX serial pairs with
option to overlay CAN
interface on 1 port
USB 3.0, 4 x 10Gb
Ethernet
Added in
Rev 3.0
10 AB (Single) 4 No No No 2 1 LVDS A only (AB
(Single) channel), DDI
2 Serial COM, 1 optional
CAN USB 3.0
ACM-XD15B7
6Acrosser Technology Co., Ltd.
1.1. Specifications
CPU • Intel® Xeon® D Processor (Industrial grade)
• Xeon® D1548 2.0/2.6GHz 12MB Cache, 45W (8 core)
Chipset • Integrated in SoC processor
BIOS • Software Protection function
• PEG: Enable / Disable(Default)
• PXE Booting: Enable(Default) / Disable
• DMI Link active state power management (ASPM):
Enable / Disable (Default)
Memory • 2x 2400 DDR4 SODIMM (Support ECC function)
• Memory up to 32GB (Dual channel)
• Default conguration: 8GB+8GB (Micron IC Used)
10 GbE Ethernet • 2x 10GBASE KR (10 GbE with KR interface & NC-SI)
• Support PXE Boot function
GbE Ethernet • 1x GbE & (Intel I210IT)
• PCI-e Lane7used by GbE LAN
• Support PXE Boot function
NC-SI • NC-SI supported on AB connector
SATA • 2x SATA III (Port 0/1)
USB • 4x USB2.0 (Port 0/1/2/3)
• 4x USB3.0 (Port 0/1/2/3)
Serial Port • 2x RS-232 (Only TX & RX)
GPIO • 4-bit GPI and 4-bit GPO
PCI-e/PCI Busses
Support
• 24x PCI Express 3.0 lanes
• 1x PCI-e x16 (PCI-e lanes 16~31, reserved 2x PCI-e
x8 by bios setting)
• 1x PCI-e x8 (PCI-e lanes 8~15)
• 8x PCI Express 2.0 lanes
• 6x PCI-e x1: AB connector, PCI-e Lanes 0~5)
• 1x PCI-e x1: CD connector, PCI-e Lanes 6)
OS Support • Linux Kernel 4.9
Heat sink • Aluminum material heat-sink with fan(Default)
• CPU Heat spreader(Optional item)
Watchdog Timer • Software programmable 0~255 seconds, 0 = disable
timer.
Power Mode • AT Mode (Auto power on after power input)
ACM-XD15B7
10 Acrosser Technology Co., Ltd.
2.2. Connector Pin Definition
CPU Intel Xeon D Processor (Industrial grade)
Xeon® D1548 2.0/2.6GHz 12MB Cache, 45W (8 core )
FCBGA1667 37.5x37.5mm
DIMM1/DIMM2 CN_DIMM_1&2 DDR4 SO-DIMM 260P
CPUFAN1 3-pin Fan Connector
Pin # Signal
1 GND
2+12V
3 FAN Speed Sensor
Header: 3-pin. Pitch: 2.54mm.
CPLD CPLD Power Manager
CN1 COM-Express 220Pin male H3.25mm Pitch:0.5mm TYPE 7 C&D
CN2 COM-Express 220Pin male H3.25mm Pitch:0.5mm TYPE 7 A&B
SPI_ROM For BIOS Firmware SPI_128Mb
2.2.1. CN1, CN2 Pin Assignments
This module is connected to the carrier board via two 220-pin connectors for a total
of 440 pins connectivity. These connectors are broken down into four rows. The CN2
connector consists of rows A and B, while the CN1 connector consists of rows C and
D.
Pin # CN2 – Row A CN2 – Row B CN1 – Row C CN1 – Row D
1GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
2GBE0_MDI3- GBE0_ACT# GND (FIXED) GND (FIXED)
3GBE0_MDI3+ LPC_FRAME# USB_SSRX0- USB_SSTX0-
4GBE0_LINK100# LPC_AD0 USB_SSRX0+ USB_SSTX0+
5GBE0_LINK1000# LPC_AD1 GND (FIXED) GND (FIXED)
6GBE0_MDI2- LPC_AD2 USB_SSRX1- USB_SSTX1-
7GBE0_MDI2+ LPC_AD3 USB_SSRX1+ USB_SSTX1+
8No Connect LPC_DRQ0# GND (FIXED) GND (FIXED)
9GBE0_MDI1- LPC_DRQ1# USB_SSRX2- USB_SSTX2-
Table des matières
Autres manuels Acrosser Technology Matériel informatique
Acrosser Technology
Acrosser Technology AR-B1622 Guide d'installation
Acrosser Technology
Acrosser Technology AR-B1474 Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B1653 Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B1651 Manuel utilisateur
Acrosser Technology
Acrosser Technology ACM-EL6KE0-A Series Manuel utilisateur
Acrosser Technology
Acrosser Technology AND-DNV3N3 Series Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B1543 Manuel utilisateur
Acrosser Technology
Acrosser Technology AMB-VDX3H2 Manuel utilisateur
Acrosser Technology
Acrosser Technology AMB-VDX3H1 Series Manuel utilisateur
Acrosser Technology
Acrosser Technology AMB-VDX3H1 Series Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B1479 Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B2001 Manuel utilisateur
Acrosser Technology
Acrosser Technology 386SX Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B1662 Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-ES5495 Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B1551NP Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B1797 Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B1540 Manuel utilisateur
Acrosser Technology
Acrosser Technology AR-B1652 Manuel utilisateur
Acrosser Technology
Acrosser Technology 486DX2 Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
