ABB SmartMedia SM2000 Instructions d'installation

INFORMATION

No. INF02/61 Date: June 2002 Product:SM2000 Videographic Recorder

Manual: IM/SM2000

SM2000

Compact Flash Hardware Installation

noitpircseD.oNtraPytQ

ylbmessA-buShsalFtcapmoC2600/0002RG1

wercS01x5.2M32811B2

kniLBCP0529B2

tcapmoC0002MS–teehSnoitamrofnI noitallatsnIerawdraHhsalF 16/20FNI1

2 Tools Required

• Medium, flat-bladed screwdriver

• No. 1 Pozidriv screwdriver

3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.5

Caution. The instrument is vulnerable to

electrostatic damage. Wear an anti-static strap or

dismantle the unit on an anti-static workbench.

1) Isolate the instrument from the power supply.

2) Remove the instrument from its case – see Fig. 3.1.

1 Introduction

This Information Sheet describes the procedure for fitting

Compact Flash hardware to SM2000 instruments.

The Compact Flash Media Service Pack, GR2000/0700,

includes the following items:

Withdraw the instrument

from the case

Remove tamper-proof seal

(if fitted)

Unscrew the jacking screw

Fig. 3.1 Removing the Instrument from its Case

Information. Refitting is the

reverse of removal.

Remove pozidriv screws

(one each side)

Lift up top cover

Remove top cover

Remove PCB locking bar

Fig. 3.2 Removing the Chassis Top Cover and PCB Locking Bar

4) Remove the existing media board sub-assembly –

see Fig. 3.3.

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.5

3) Remove the chassis top cover and PCB locking bar –

see Fig. 3.2.

Remove pozidriv screws

(1 each side)

Disconnect configurator

board ribbon cable

Lift main board from

motherboard and withdraw

media board

Lift black

retaining flap

Disconnect

flexi-circuit

Media board

Main board

✶

Note. Flexi-circuit is not present if

neither Compact Flash nor SmartMedia

option is already fitted to the instrument.

Information. Refitting is the

reverse of removal.

Fig. 3.3 Removing the Media Board Sub-Assembly

8) Refit the instrument to the case – see Fig. 3.1.

9) Restore the power supply to the instrument.

1Check that PCB link LK1

is fitted and is in the

correct position for

Compact Flash hardware.

5V Position

SmartMedia

3.3V Position

Compact Flash

LK1

Fig. 3.4 PCB Link LK1 Positions

6) Fit the new media board sub-assembly – see Fig. 3.3.

7) Refit the PCB locking bar and chassis top cover –

see Fig. 3.5.

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.5

5) Check the position of PCB link LK1 – see Fig. 3.4.

EMC Contacts

Position top cover as shown

Slide forward

Lower rear

Refit pozidriv screws

(one each side)

Refit PCB locking bar

ensuring the slots

in the bar locate correctly

on the boards and chassis

Caution. When positioning the

chassis top cover, take care not to

damage the EMC contacts.

Fig. 3.5 Refitting the PCB Locking Bar and Chassis Top Cover

INF02/61 Issue 1

The Company’s policy is one of continuous product

improvement and the right is reserved to modify the

information contained herein without notice.

Printed in UK (06.02)

ABB Limited

Howard Road, St. Neots

Cambridgeshire, PE19 8EU

Tel: +44 (0)1480 475 321

Fax: +44 (0)1480 217 948

ABB Inc.

125 E. County Line Road

Warminster, PA 18974

USA

Tel: +1 215-674-6000

Fax: +1 215-674-7183

ABB has Sales & Customer Support expertise in over

100 countries worldwide

www.abb.com

Autres manuels pour SmartMedia SM2000

Autres manuels ABB Instrument de mesure

ABB

ABB AW101 Manuel utilisateur

ABB

ABB FXE4000 Manuel de formation

ABB

ABB AV1 Manuel utilisateur

ABB

ABB FEF series Manuel utilisateur

ABB

ABB Sensyflow FMT500-IG Manuel utilisateur

ABB

ABB 2117 U-500 Manuel utilisateur

ABB

ABB EV3 Manuel utilisateur

ABB

ABB AX416 Manuel utilisateur

ABB

ABB 10D1477 Manuel utilisateur

ABB

ABB FMT200-ECO2 Manuel utilisateur

ABB

ABB 4630 Manuel utilisateur

ABB

ABB ScreenMaster RVG200 Manuel utilisateur

ABB

ABB LWT300 series Manuel utilisateur

ABB

ABB GLA232 Series Manuel utilisateur

ABB

ABB RATOSIGHT 10A2235 Manuel utilisateur

ABB

ABB GAA330-M Manuel utilisateur

ABB

ABB IM/SM3000 Manuel utilisateur

ABB

ABB M4M 30 Manuel utilisateur

ABB

ABB 10D1475 Manuel utilisateur

ABB

ABB Relion RES670 Manuel utilisateur

ABB

ABB VortexMaster FSV430 Instructions d'installation

ABB

ABB Navigator 600 Phosphate Manuel utilisateur

ABB

ABB IM300-I Guide de démarrage rapide

ABB

ABB C1900 Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur