ABB LWT300 series Manuel utilisateur

—

LWT300 series

Quick Start Guide

Unpacking

If you are reading this document, you have already opened the box containing your instrument. While

following the basic safety instructions provided below, proceed with unpacking the content of this box.

Basic safety

Personnel

WARNING

Only properly certified and authorized personnel should be charged with the

installation, electrical connection, commissioning, operation and maintenance of the

instrument.

Depressurize the vessel before opening the instrument connection. Any process

media released may cause severe injuries.

Carefully plan any installation, modification or repair before actually proceeding.

Electrical

WARNING

Do not make electrical connections unless the electrical code designation stamped on

the instrument data plate matches the classification of the area in which you want to

install the instrument. Failure to comply with this warning can result in fire or explosion.

Use only tools compliant with national insulation standards, e.g., DIN EN 60900.

Use only non sparking tools when installing the instrument in hazardous areas.

Improper use

It is prohibited to use the instrument for any of the following, including but not limited to:

• A climbing aid, e.g., for mounting purposes.

• A support for external loads, e.g., as a support for pipes.

• By adding material, e.g., by painting over the name plate, or welding/soldering on parts.

• By removing material, e.g., by drilling the housing.

2Unpacking

What’s in the box

Check for damages to the included parts:

• LWT series instrument head

• Instrument coupler

• Probe

• User’s guide

Should any part of the package be damaged upon reception, contact ABB customer service as indicated

on the back cover of your user guide.

—

Figure 1 LWT300 series typical installation

LWT300 head

LWT NPT coupler

Bolts (provided by client)

NPT flange (provided by client)

Gasket (provided by client)

Nuts (provided by client)

LWT300 series Quick Start Guide 3

Basic physical installation

Below is a list of basic steps necessary to properly install LWT series instruments, as recommended by

ABB. All installations should be performed by certified and authorized personnel in accordance with all

applicable local security codes (electrical, engineering, etc.) (the page references in parentheses refer to

the LWT series user’s guide)

Here are the basic installation steps:

1 Access and properly secure the installation site (vessel depressurization and cool down, mains power

down, etc.).

2 Attach the probe to the head/coupler assembly.

3 Slide the probe in the vessel and attach the probe/coupler assembly on the flange.

4 Connect the mains to the head unit.

5 Power up and configure the instrument.

Simple connection diagram

Here is a simple power connection diagram for LWT series instruments.

—

Figure 2 Typical LWT connection

Initial software setup

Initial setup of the instrument is performed via the Easy Setup menu. Below you will find menu items,

factory-set values and lists of all available values when you click Select from the Easy Setup screen.

—

Figure 3 Easy Setup menu

4Initial software setup

Submenu Default value Available values

Language

(language used on the interface)

English English

French (Français)

German (Deutsch)

Simplified Chinese

Set PV (4-20mA)

(primary value measured on the

4-20 mA current loop)

Level Level

Distance

Ullage

PV Unit

(measurement unit for the primary

value)

m (meter) m (meter)

cm (centimeter)

mm (millimeter)

ft (feet)

in (inches)

Empty/Zero

(distance between the process

connection and the starting point of

the measuring level range)

factory-set based on instrument

ordered

Customizable

Full/Span

(the distance between the minimum

level and the maximum level)

factory-set based on instrument

ordered

Customizable

Application Category

(general type of process application)

Water-based (DC>10) Water-based (DC>10)

Liquid mix. (3<DC<10)

Oil-based (DC<3)

Solid (organic)

Solid (others)

Max Level Rate

(rate at which the vessel should reach

its maximum level)

No Filter No Filter

Very Slow: <1cm/min

Slow: <5cm/min

Medium: <25cm/min

Fast: 1m/min

Very Fast: <5m/min

Display Line1 View1

(first line of text on the first screen

displayed, under the measured value)

Level Level

Ullage

PV Percent

Current

Empty

Distance

Span

Probe Length

Media Level

All menus available in your LWT instrument are explained in more details in the accompanying user’s

guide.

P/N 3KXL001068U0100

Autres manuels pour LWT300 series

Autres manuels ABB Instrument de mesure

ABB

ABB MagMaster Feuille d'instructions

ABB

ABB MT series Manuel utilisateur

ABB

ABB AK102 Manuel utilisateur

ABB

ABB CoriolisMaster FCM2000 Manuel utilisateur

ABB

ABB 4620 Manuel utilisateur

ABB

ABB GLA132 Series Manuel utilisateur

ABB

ABB Relion RES670 Manuel utilisateur

ABB

ABB 8002 Manuel utilisateur

ABB

ABB AK101 Manuel utilisateur

ABB

ABB EV3 Manuel utilisateur

ABB

ABB AX400 Series Manuel utilisateur

ABB

ABB VA Master FAM540 Manuel de formation

ABB

ABB Comem DTI Manuel utilisateur

ABB

ABB Relion 630 Series Fiche technique

ABB

ABB B23 Manuel utilisateur

ABB

ABB MicroGuard solution Manuel utilisateur

ABB

ABB Kent-Taylor AquaProbe Manuel utilisateur

ABB

ABB 10DX3111G Manuel utilisateur

ABB

ABB TMD-T4 Manuel utilisateur

ABB

ABB CoriolisMaster FCB100 Manuel utilisateur

ABB

ABB FSM4000 Series Manuel utilisateur

ABB

ABB ADS420 Manuel utilisateur

ABB

ABB PositionMaster EDP300 Manuel utilisateur

ABB

ABB 7651 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur