Zte R206-Z Manuel utilisateur

Confidential and Proprietary Information of ZTE CORPORATION 1

R206-Z

Let’s go

Getting started with your device.

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057

ZTE R206-Z Getting Started

2 Confidential and Proprietary Information of ZTE CORPORATION

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any

means, electronic or mechanical, including photocopying and microfilm, without the prior written

permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors

or update specifications without prior notice.

Version No. : R1.1

Edition Time : 2.5.2013

NOTE:

Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in

such space may cause excessive heat and raise ambient temperature, which may lead to automatic

shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated

place before turning on for normal use.

ZTE R206-Z Getting Started

Confidential and Proprietary Information of ZTE CORPORATION 3

Getting to Know Your Device

Appearance

The following figure is only for your reference. The actual product may be different.

1. LED Indicators

2. Power Button

3. WPS Button

4. Micro USB Port

5. (U)SIM Card Slot

6. microSD Card Slot

NOTE: microSD logo is a trademark of SD Card Association.

Indicators

Indicator Status Description

Network

Red solid Error status. Not registered to the mobile

network, no (U)SIM card inserted or no

network service available.

Green solid Registered to the mobile network.

Green blinking Connected to the mobile network and data is

being transferred.

Wi-Fi

Blue solid Wi-Fi is active.

Blue blinking WPS is active.

LED light off Wi-Fi is off or your device is in sleep mode.

Battery

Red solid/ blinking The battery is low. Please charge the battery.

Green blinking The battery is being charged.

Green solid The battery level is middle or high.

ZTE R206-Z Getting Started

4 Confidential and Proprietary Information of ZTE CORPORATION

LED light off Your device is in standby mode and not being

charged, or the battery is not inserted.

Connection Scenario

Your device supports two methods to connect to the Internet and supports multi-clients for

surfing on the Internet at the same time. The following figure is only for your reference.

3G Mode: Use your (U)SIM card to access the Internet.

AP Station Mode: Your device will connect to other WLAN device (hotspot device, wireless

router, etc.) via Wi-Fi to access the Internet. The WLAN device has already connected to the

Internet.

NOTE:

The subnets of your device and other WLAN device must be different.

Installing Your Device

1. Slide the back cover and remove it

ZTE R206-Z Getting Started

Confidential and Proprietary Information of ZTE CORPORATION 5

2. Insert the (U)SIM card.

IMPORTANT: Your device does not support Micro/Nano or any other nonstandard SIM cards. To avoid

device damage, please do not use them.

3. Insert the microSD card if necessary.

4.Insert the battery.

ZTE R206-Z Getting Started

6 Confidential and Proprietary Information of ZTE CORPORATION

5. Close the back cover.

Connecting to Your Device

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize.

2. Use your normal Wi-Fi application on the client to search for the available wireless networks.

NOTE: Please set the client to obtain an IP address automatically referring to the chapter

“Configuring your PC”, and then the client will get an IP address like “192.168.0.101”.

3. Select the SSID of your device, and then click Connect.

ZTE R206-Z Getting Started

Confidential and Proprietary Information of ZTE CORPORATION 7

NOTE:

Please check the label on your device to get the default SSID.

4. Input the password, and then click Connect.

NOTE:

You may need to input the password for Wi-Fi connection. Please check the label on your device to get

the default.

5. Wait a moment, and then the client will connect to your device successfully.

ZTE R206-Z Getting Started

8 Confidential and Proprietary Information of ZTE CORPORATION

Via USB Cable

1. Connect to the device.

2. Power on your device.

3. The OS detects and recognizes new hardware and finishes the installation automatically.

NOTE: If the system does not launch installation automatically, you can run the installation program in

path of My Computer > ZTEMODEM.

4. Wait a moment, and then the client will connect to your device successfully.

Accessing the Internet

3G Mode

After the client connected to your device successfully, you can access the Internet in the

Automatic or Manual mode. The default mode is Automatic.

Mode Operations

Automatic Your device will connect to the Internet automatically, and your

clients can surf on the Internet directly.

Manual Log in the webGUI configuration page, and select Settings > 3G

ZTE R206-Z Getting Started

Confidential and Proprietary Information of ZTE CORPORATION 9

Settings > Network Select > WAN Connection Mode > Manual,

and then click Connect or Disconnect.

NOTE:

If you want to modify the detailed parameters of your device, please log in the webGUI configuration

page by visiting http://192.168.0.1 or http://m.home.The default password is admin.

AP Station Mode

1. Log in the webGUI configuration page.

2. Select Settings > AP Setting.

3. Set the WLAN and WLAN mode, and then click Apply.

NOTE:

You need to set the WLAN On and select Wi-Fi Prior.

4. Connect to the WLAN device.

There are two methods for your reference.

Input the WLAN device information in the WLAN Setting area, and then click Apply.

Click More, select this WLAN device which will be listed, and then click Connect.

ZTE R206-Z Getting Started

10 Confidential and Proprietary Information of ZTE CORPORATION

5. After the client connected to the WLAN device successfully, you can access the Internet.

Configuring Your PC

Follow the following steps and figures for Windows XP to configure the Internet Protocol for

your Wi-Fi connection.

1. Right-click My Network Places, and then select Properties.

2. Right-click Wireless Network Connection, and then select Properties.

Table des matières

Autres manuels Zte Modem

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur

Zoom

Zoom 1070 Series Manuel utilisateur

Aztech

Aztech HW831 Manuel utilisateur