Zte MF700 Manuel utilisateur

MF700

HSPA+ TV Modem

User Guide

Introduction

The product is a multi-mode 3G modem that works on GSM/GPRS/EDGE/

UMTS/HSPA networks. With a USB interface connecting to your laptop or

desktop computer, it supports data and SMS services through the mobile

USB Modem network as well as mobile TV, helping you realize mobile

communication and entertainment anytime and anywhere.

Specification

The following table shows the specification of your device.

Interface Type

USB 2.0 HIGH SPEED

Systems

supported

Supports most types of laptop and

desktop PC

Operating

systems

supported

Windows XP (SP2 or later), Vista,

Windows 7;

MAC 10.4.11 or later;

Fedora 12 or later, Ubuntu 9.10 or later

Functions

SMS service, data service, applications

management, TV, microSD card, etc.

Transmission

speed (Max)

5.76 Mbps UL

14.4 Mbps DL

Temperature

Storage: -40 ℃~ +80 ℃

Operation:-10 ℃~ +60 ℃

microSD

capability

Support up to 32 GB microSD card

Notes: microSD is a trademark of SD Card Association.

Hardware Installation

Installing the SIM/USIM Card

1. Remove the back cover on the modem.

2. Hold your SIM/USIM card with the cut corner oriented as shown and then

slide it into the card holder with the metal contacts facing the modem.

3. Replace the back cover.

Installing the Memory Card

Only microSD card is supported by the modem and do not insert other

memory cards into the modem.

Insert the microSD card, orientated as shown, into the holder until you hear a

click.

Connecting the USB Modem to Your Computer

Remove the modem cap and plug the modem firmly into a USB port on your

computer.

Software Installation

On different operating systems, the software installation procedures may be

different. Please follow the general guide below and the system prompts

during installation.

•For Windows XP, Vista and Windows 7

When you connect the modem to your PC correctly, the system

automatically recognizes it as a CD-ROM and starts the software

installation wizard. If the system does not launch the installation wizard

automatically, please start it by running the executable file in the new

CD-ROM directory.

•For Mac OS

The system will automatically display a new CD-ROM icon on the desktop,

when you connect the modem to your Mac correctly. Double click the

installation software package in the CD-ROM, and follow the system

prompts to complete the software installation.

•For Linux

The system will automatically display a CD-ROM on the desktop, when

you connect the modem to your computer correctly. Copy and decompress

the installation package from the CD-ROM to another directory.

Root users can double-click the install.sh file and select Run in Terminal

to start the installation.

Non-root users can start Terminal and gain the root user privilege, then run

the install.sh file in the Terminal.

Safe Removal from Your System

Please close the application software, and then you can pull out the USB

Modem safely.

Functions

Click the following buttons to access each function.

Windows

Mac

Linux

Function

Connect to the Internet.

Send and receive text messages.

Manage contacts information.

Configure the USB modem settings.

Show connection information.

Watch mobile TV programs.

LED Lights

Indication

Modem Status

Red

Power on, but not registered to a network

Indication

Modem Status

Blue solid

Registered to a network

Blue blinking

Active data transfer on the network

Warning and notice

To the owner

•Some electronic devices are susceptible to electromagnetic interference

sent by modem if inadequately shielded, such as the electronic system of

vehicles. Please consult the manufacturer of the device before using the

modem if necessary.

•Operating of laptop and desktop PCs and the modem may interfere with

medical devices like hearing aids and pacemakers. Please always keep

them more than 20 centimeters away from such medical devices when they

are turned on. Turn the modem off if necessary. Consult a physician or the

manufacturer of the medical device before using the modem.

•Be aware of the usage limitation when using a modem at places such as oil

warehouses or chemical factories, where there are explosive gases or

explosive products being processed. Turn off your modem if required.

•The use of electronic transmitting devices is forbidden in aircrafts, at petrol

stations and in hospitals. Please observe and obey all warning signs and

switch off your modem in these conditions.

•Do not touch the inner antenna area if not necessary. Otherwise it will

affect your modem’s performance.

•Store the modem out of the reach of little children. The modem may cause

injury if used as a toy.

Using your USB Modem

•Please use original accessories or accessories that are authorized. Using any

unauthorized accessories may affect your modem’s performance, and

violate related national regulations about telecom terminals.

•Avoid using the modem near or inside metallic structures or establishments

that can emit electromagnetic waves. Otherwise it may influence signal

reception.

•The modem is not waterproof. Please keep it dry and store in a shady and

cool place.

•Do not use the modem immediately after a sudden temperature change. In

such case, it will produce dew inside and outside the modem, so don’t use

it until it becomes dry.

•Handle the modem carefully. Do not drop, bend or strike it. Otherwise the

modem will be damaged.

•No dismantling by non-professionals and only qualified technicians can

undertake repair work.

•Operating temperature range of -10℃~ +60℃and humidity range of 5%

~ 95% are recommended.

Limited Warranty

•This warranty does not apply to defects or errors in the Product caused by:

i. Reasonable abrasion.

ii. End User’s failure to follow ZTE’s installation, operation or

maintenance instructions or procedures.

iii. End User’s mishandling, misuse, negligence, or improper installation,

disassembly, storage, servicing or operation of the Product.

iv. Modifications or repairs not made by ZTE or a ZTE-certified individual.

v. Power failures, surges, fire, flood, accidents, actions of third parties or

other events outside ZTE’s reasonable control.

vi. Usage of third-party products, or usage in conjunction with third-party

products provided that such defects are due to the combined usage.

vii. Any other cause beyond the range of normal usage intended for the

Product.

End User shall have no right to reject or return the Product, or receive a

refund for the Product from ZTE under the above-mentioned situations.

•This warranty is End User’s sole remedy and ZTE’s sole liability for

defective or nonconforming items, and is in lieu of all other warranties,

expressed, implied or statutory, including but not limited to the implied

warranties of merchantability and fitness for a particular purpose, unless

otherwise required under the mandatory provisions of the law.

FCC Compliance

This device complies with part 15 of the FCC

Rules. Operation is subject to the condition

that this device does not cause harmful

interference.

Caution: Changes or modifications

not expressly approved by the

manufacturer could void the user’s

authority to operate the equipment.

NOTE: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in

a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be

determined by turning the equipment off

and on, the user is encouraged to try to

correct the interference by one or more of

the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the

equipment and receiver.

—Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced

radio/ TV technician for help.

Health and safety information

Radio Frequency (RF) Energy

This model USB Modem meets the government’s requirements for

exposure to radio waves.

This USB Modem is designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF) energy set by the

Federal Communications Commission of the U.S. Government:

The exposure standard for wireless mobile USB Modems employs a

unit of measurement known as the Specific Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are

conducted using standard operating positions accepted by the FCC

with the USB Modem transmitting at its highest certified power level in

all tested frequency bands. Although the SAR is determined at the

highest certified power level, the actual SAR level of the USB Modem

while operating can be well below the maximum value. This is

because the USB Modem is designed to operate at multiple power

levels so as to use only the poser required to reach the network. In

general, the closer you are to a wireless base station antenna, the

lower the power output.

The highest SAR value for the model USB Modem as reported to the

FCC when tested for use at the body worn is 1.17 W/kg (Body-worn

measurements differ among USB Modem models, depending upon

available enhancements and FCC requirements.)

While there may be differences between the SAR levels of various

USB Modems and at various positions, they all meet the government

requirement.

Table des matières

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur

Zoom

Zoom 1070 Series Manuel utilisateur

Aztech

Aztech HW831 Manuel utilisateur