Zip HYDROCHILL HC10 Series Manuel
1
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
ZIP
HYDROCHILL
INSTALLATION INSTRUCTIONS & USER MANUAL
MODEL NUMBER:
HC10 range
High capacity chiller systems
2
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
PRECAUTIONS AND GENERAL RECOMMENDATIONS
TABLE OF CONTENTS
Precautions and recommendations....................................................................... 2
Before installing the HydroChill ............................................................................ 3
Product approvals & product description.............................................................. 4
Technical features ................................................................................................ 5
Technical data .................................................................................................... 10
Installation ........................................................................................................... 11
General CO2 cylinder safety guidelines ............................................................. 17
Filtration (inc.Ultra violet (UV) filtration)............................................................... 18
Sanitisation.......................................................................................................... 20
Maintenance........................................................................................................ 21
Safeguarding the environment ............................................................................ 22
Warranty.............................................................................................................. 23
Contact details..................................................................................................... 24
• Appliance for internal use only.
Place the unit away from water
jets.
• Always connect the water cooler
to a water main that supplies
wholesome drinking water only.
• Before each installation, the unit
must be sanitized by an authorized technician.
• After installation, ensure that the unit is not resting on the power cable.
• Check that the unit is level and that it is resting on a surface with sufcient
load bearing capacity, in an environment that is suitable for its dimensions
and its use.
• Before any maintenance or cleaning operation is carried out, remove the plug
from the socket or disconnect the power supply.
• Ensure that the product is not sited close to sources of heat.
• To guarantee adequate ventilation, leave at least 10 cm of space around the
unit.
• Install the product in a clean, dry, well-ventilated environment. The product
is designed to function in environments with a temperature range of between
5°C and 32°C - Climate Class N.
• Take care not to damage the cooling uid circuit: it is lled with R290, which
is a highly ammable gas. It is essential to ensure that the tubes of the
refrigerant circuit are not damaged.
• Ensure that it is possible to disconnect the power supply either by removing
the plug or via a two-pole circuit-breaker, with a contact separation of at least
!
3
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
PRECAUTIONS AND GENERAL RECOMMENDATIONS
3mm in all poles.
• The Appliance must be protected by an RCD or RCBO.
• Check that the voltage shown on the serial number plate corresponds to the
voltage being supplied at the installation site.
• The unit must not be cleaned with a water jet. Do not position other electrical
equipment in the immediate vicinity of the water cooler.
• Turn off the main water inlet tap if the unit is not to be used for a long period.
• Keep the areas surrounding the unit dry to avoid the risk of people slipping.
• CO2: You can have serious health problems if breathing air containing
concentrations of CO2up to 15000ppm (1.5%) for more than 10 minutes.
Proper ventilation must be provided to ensure that, in case of escape,
concentrations of CO2remain below this level.
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied person in order to avoid a hazard
• Do not use extension leads or adapters.
• This appliance is intended to be used by persons (including children
aged from 8 years) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, provided that they
have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
• The appliance is only to be installed in locations where it can be
overseen by trained personnel.
• This equipment is to be installed in compliance with the local plumbing
regulations.
• Water pipe connections and xtures directly connected to a wholesome
(cat 1) water supply shall be sized, installed, and maintained in
accordance with federal, state, and local codes.
• This publication is based on information available when approved for printing.
• Continuing design renements could cause changes that may not be included
in this publication.
BEFORE INSTALLING THE HYDROCHILL
• Congratulations for choosing a HydroChill product.
• We have designed and manufactured this product with great care to ensure
that it will dispense water of the highest quality.
• In order to get the most out of your water cooler, please read the instructions
in this manual and retain the manual for future reference.
4
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
APPROVALS
This water cooler is designed, manufactured and marketed in compliance with:
• The safety objectives of the Machinery Directive 2006/42/C
• The protection requirements of the Electromagnetic Compatibility Directive
2014/30/EU.
The electrical safety of the product is ensured only when it is properly connected
to an efcient, legally compliant grounding circuit.
PRODUCT DESCRIPTION
Compact, powerful and entirely made of stainless steel, HydroChill HC10
is the smallest cooler of the range: perfect for your home and ofce, with
professional performance.
The main features of the unit are as
follows:
DRY COOLING technology:
a noiseless, low maintenance and
innovative system, allowing you to get
great performances in a small size.
High quality stainless steel buttons,
wear resistant and easy to use.
3 dispensing options: ltered chilled
water, ltered ambient temperature
water, ltered ,sparkling water (model
dependant).
Modern and compact design in strong
stainless steel.
Fast and easy installation for home and
ofce usage
Filtration: on request, a UV lamp can be
placed on the dispensing point.
5
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
TECHNICAL FEATURES
Stainless steel buttons
Drip tray with grid
Detachable water dispensing
nozzle
1
2
3
1
2
3
Front of product
Explanation of HydroChill range product code
HC HydroChill
Range
Product group
10 range
20 range
50 range
C Chilled only
* Chilled sparkling
*T* Dispensing tap
IT* Buttons
BIT Bridge
XX
HC X XXX XXX
Dispensing tap
2A 2 Tap
2P 2 Tap + badge
3A 3 Tap
3P 3 Tap + badge
** None
Control
Conguration
XXX
U With UV
* Without UV
UV FILTRATION
Capacity (l)
30
60
80
150
280
Example
HC50CBITU280 Is a HC50, chilled only, bridge tap, with UV, 280 lire capacity.
* digit suppressed in product code.
6
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
TECHNICAL FEATURES - REAR
Slide cover
IEC outlet power cable
Power button
Drinking water inlet pipe joint Ø5/16” (8mm)
CO2inlet pipe joint Ø5/16” (8mm)
Adjustable thermostat
Support feet
30 model 45 model
1
6
2
3
4
5
7
1
2
3
4
5
6
7
Rear of product
7
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
TECHNICAL FEATURES
Rating plate
Class N
Made in ItalySerial no.
PRODUCT
230V ~ 50 Hz KW A
RoHS
COMPLIANT
2011/65/EU
Wholesome
water only
GAS g
(situated on the back
of product)
Class N
Made in ItalySerial no.
PRODUCT
230V ~ 50 Hz KW A
RoHS
COMPLIANT
2011/65/EU
wholesome
water only
GAS g
Product identifying
part number
Supply voltage
Unique product
serial number
Refrigerant gas
type & weight
Conformity to EU product
directives
Power rating Current rating
Conformity to EU
environmental
directives
Climate class
Country of origin
Water supply
requirements
8
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
TECHNICAL FEATURES - DISPENSING BUTTONS
Filtered chilled water
Filtered sparkling water (model specic)
Filtered ambient water
1
2
3
1 2 3
Operation of dispensing buttons - press to dispense
9
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
TECHNICAL FEATURES
30 model
45 model
Dimensions (sparkling model shown for ref. only)
57
499
261
418 276
28
57
499
318
470
329
28
10
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
TECHNICAL DATA
Technical Data Sheet 30 45
Cooling capacity 30 lt/h 45 lt/h
Continuous supply 6 lt 12 lt
Cold water temperature 5 - 12°C *
Cooling technology Aluminium fusion block heat exchanger
Cold Water Coil Stainless Steel AISI 316
Pump Professional membrane carbonation pump
Condensation Ventilated
Adjustable Thermostat Yes
Refrigerant gas R290
Supply 230 V - 50 Hz
Compressor power 1/8 HP 1/5 HP
Watt 230 W - 1 A 300 W - 1,3 A
Inlet water Pipe Ø 8 mm (5/16”)
Inlet water pressure 2.5 bar (0.25 MPa) - 3.5 bar (0.35 MPa)
Inlet CO2Pipe Ø 8 mm (5/16”)
Dispensing area height 280 mm 331 mm
Dimensions LxDxH
(mm) 261x499x418 318x499x470
Packaging dimensions
LxDxH (mm) 310x540x470 390x590x540
Net weight (kg) 28 31
Gross weight (kg) 31 35
* Rated at a room temp. of 25°C and inlet water temp. of 20°C
For the technical data of other models, examine the rating plate attached to each product.
Table des matières
Autres manuels Zip Refroidisseur
Zip
Zip 802261 Manuel utilisateur
Zip
Zip Chillmaster 81495 Manuel utilisateur
Zip
Zip 801621UK Manuel utilisateur
Zip
Zip HydroTap G4 CS175 Manuel utilisateur
Zip
Zip HydroChill Te-Mix Aqua 15 Manuel
Zip
Zip HydroTap G4 Manuel utilisateur
Zip
Zip HydroTap G5 Touch-Free Wave Mode d’emploi
Zip
Zip CH101 Manuel utilisateur
Zip
Zip HydroChill HC05T128 Manuel
