ZEAPON Motorized Micro2 Manuel utilisateur
Motorized Micro2
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
3
Please read the User Manual carefully before using Motorized Micro 2 to avoid any
injury or damage to the product or other property caused by operation mistake.
Motorized Micro 2 Diagram
Upper Slider
Quick Locking Buttons
Following Dust Sweeper
2.5mm Shutter Trigger Port
USB Type-C Port
Forward Key
Backward Key
Power Indicator
Speed Indicator
Power Button
Thumb Screw
Positioning Groove
Lower Slider
Dual Positioning Screws
Rail Band Belt
Rail Band Belt Tension Screw
Rail and Belt Tension Screw
Battery Compartment
4
NOTE
Do not attempt to disassemble or modify the product in any unauthorized
way
Make sure the mounted device on the slider is within 4.5kg.
Make sure the self locking key is Off before using.
Please keep the Motorized Micro2 clean and free from any obstruction.
For more detailed tutorial video, please visit our officialwebsite:https://www.zeapon.com
Function Description
Name
Function
Forward Key
Slide forward
Backward Key
Slide backward
2.5mm Shutter Trigger Port
Slider connects to camera via shutter
trigger cable to control camera shutter
USB Type-C Port
Can be charged and firmware upgraded
with external PD USB-C power adapter or
PD power bank
Power Indicator
Green/Yellow/Red;Green: sufficient;
Yellow: medium; Red: low
Speed Indicator
Three Speed Status; One light on: low
speed; Two lights on: medium speed;
Three lights on: high speed
Power Button
Power On/Off & Function Trigger
Thumb Screw
Fix the Slider Motor to slider
Rail Band Belt Tension Screw
Adjust the tension of the rail band belt
Rail Band Belt Base
Fix the belt to the upper & lower slider
Rail Band Belt
Supports motor-driven sliding movement
Battery Compartment
Compatible with F550/F750/F970 lithium
battery
5
Function
Key Action
Beep Sound
Power On Long press Power
Button for 3 seconds
/
Power Off
Long press Power
button for 3 seconds
/
Forward
Long press Forward Key
/
Backward
Long press Backward
Key
/
Speed Adjustment
Press Power Button
once
/
Set Waypoints
Press Power Button
twice
Set point 1: Beep sound voice
Set point 2: Beep sound twice
Delete All Waypoints
Long press left+right key
Long beep sound
Start Running
Double press power
button
/
Starts/Pauses circulation
Press the left/Right Key
and Power button at the
same time
Rings once
Installation on single pan & tilt
1. Unscrew the 1/4” -to-3/8” screw
adapter from the bottom.
2. Mount Micro 2 to the tripod tight and
secure.
3. Screw the unscrewed adapter (1/4” to
3/8) into the pan&tilt; Then mount the
pan & tilt to Micro2
4. Attach the quick release plate to the
camera.
5. Mount the camera (with quick release
plate) to the pan & tilt.
6
Installation on double pan & tilt
1. Mount the quick release plate to Micro 2 from the bottom (with the 1/4” -to-3/8” screw
adapter)
2. Make the dual positioning screw hole visible by moving the Upper Slider sideways,
then tighten the dual positioning screws with the Allen key. Make sure there are at least
two screws tightened to ensure precise positioning and stable installation.
3. Attach the quick release plate to the camera.
4. Mount the pan & tilt to Micro 2
5. Mount Micro 2 to the pan & tilt on the tripod.
6. Mount the camera (with quick release plate) to the pan & tilt on the slider.
7
Press Quick Locking buttons again to unlick the slider to slide left/right
Position the slider to different angles to simulate rockerarm movements.
8
Connection mode with EASYLOCK
1. Loosen the locking screw on Easylock.
2. Unfold the support foot and adjust it to the desired position.
3. Mounting to tripod: unscrew the 3/8”- 1/4” screw adapter from the quick release plate.
Pan modes: Install Easylock’s QR plate on the pan’s QR plate, then attach the pan which
is on the tripod.
4. Connect Micro 2 with Easylock by fitting the positioning bean into the positioning
groove (U-shaped) then tighten the screw from the bottom of Easylock and the dual
positioning screws inside the Micro 2 with the Quick Spanner. Please make sure there
are at least two screws tightened to ensure precise and stable installation.
5. Mount the pan & tilt on Micro 2.
6. Mount the camera (with quick release plate) on pan&tilt.
The positioning screws the can be adjusted by the quick spanner.
Quick spanner
Locking Screw
9
Assembly & Dissasembly Method
1. Loosen the belt tension screw and detach the Slider Motor;
2. Loosen the belt fixing screw on upper & lower slider and detach the rail band belt
base;
3. Mount the rail band belt assembly to the rail slider (Note: rail band belt assembly is
optional)
10
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
Table des matières
Langues :
Autres manuels ZEAPON Accessoires pour appareils photo
