Yamaha S08 Voice Editor Manuel utilisateur

Contents

Introduction. . . . . . . . . . . . . . . . . . . 2

Starting Up . . . . . . . . . . . . . . . . . . . 3

Menu Bar . . . . . . . . . . . . . . . . . . . . 3

The Library Window . . . . . . . . . . . . 6

The Toolbar . . . . . . . . . . . . . . . . . . . 8

The Edit Window . . . . . . . . . . . . . 14

The Toolbar . . . . . . . . . . . . . . . . . . . 14

Normal Voice Edit Window. . . . . . . . 15

Drum Voice Edit Window . . . . . . . . . 21

OMS Settings (Macintosh) . . . . . . . . 23

An Example of Voice Editor in Use

. . 25

Troubleshooting . . . . . . . . . . . . . . 26

• Click on the red-colored text to jump to the related item in this manual.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly

forbidden without the written consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and

documentation and cannot be held responsible for the results of the use of this manual and the software.

• Copying of the commercially available music sequence data and/or digital audio ﬁles is strictly prohibited

except for your personal use.

• OMS® and are trademarks of Opcode Systems, Inc.

• The company names and product names in this Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear

somewhat different from the screens which appear on your computer.

This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operation. If

you are not, please refer to the owner’s manual which came with your Windows/Mac OS software before

using Voice Editor.

For information about hardware requirements, the interconnection of devices and the installation of the

Voice Editor software, refer to the separate “Installation Guide” as well as the Owner’s Manual for the

respective MIDI device.

Introduction

With the convenient Voice Editor, you can use a computer to edit your synthesizer's voices and

effects. The graphical user interface makes editing easy and intuitive - letting you use your

computer keyboard and mouse to control and change the various parameters from the onscreen

sliders, switches, buttons, and so on. What's more, all changes you make to the voices can be

saved to your computer.

nVoice Editor for Windows is a plug-in software.To use it, you'll need to install an appropriate compatible host

application (sequencer, etc.).

Transmit / Receive bulk data

Your synthesizer(S08)

Library Window Save the Library file

Import a voice

Edit Window

Voice

Element dialog Set the effects parameters

MUSICSYNTHESIZER

EXITENTER

KEYBOARD

–

123

456

789

PRESET

USER

GM2/XG

DRUM

MUTE

+–

COMMON

INC/YESDEC/NO

DEMO

UTILITYCONTROLLER CARD

EDIT JOB STORE

COMPARE

VOICE MULTI S EQ PLAY

PART/

COMMON

VOICE

MIX

GENERAL

TONE

CONTROLLER

EFFECT

ELEMENT

OSC/MIX

PITCH

FILTER

AMP

LFO

EFFECT

MIDICHANNEL

MIDIFILTER

SEQSETUP

MIDISETUP

EFFECT

CTRLASSIGN

KEYBOARD

VELOCITY

CTRLSETUP

SAVE

LOAD

RENAME

DELETE

FORMAT

IMPORT

VOLU

PITC

ODULATION

PHONES L/MONO

OUTPUTRDC IN ON

STANDBY FOOT

CONTROLLER FOOT

SWITCH IN OUT THRU

MIDI CARD

3.3V USB

GUITARORGANPIANO

CATEGORY

BASS STRINGS BRASS

REED/PIPE

SYNLEAD

SYNCOMP

DRUM/PERC

OTHER

CHROMATIC

PERCUSSION

SYNPAD

UTILITY

CARD

CONTROLLER

CARDUTILITYEDIT

CONTROLLER

PART/ELEMENT/KEY

MODE

DATA

Library file

Starting Up

After installing the Voice Editor and making the required connections, follow the instructions below

to start the Voice Editor.

Windows

Start Voice Editor by starting the host application (refer to the Installation Guide) and choosing

“Voice Editor for S08” from the “Plug-in” menu.

nThis is an example of the included sequence software. The operation described here differs depending on

your host application.

nIn order to use the Voice Editor, you’ll need to install the USB MIDI driver (page 10).

Macintosh

nIf you are using Voice Editor on a Macintosh computer, open the “Chooser” from the Apple menu and turn

off “Apple Talk.”

Open the “Voice Editor for S08” folder in the “YAMAHA Tools” folder and double-click the

“VoiceEditorforS08” icon.

Menu Bar

The Menu Bar holds various editing and setup functions/commands in its menus. Click each of the

menu names to open their pull-down menu, and choose the function/command you wish to apply.

Those functions/commands which are unavailable are grayed out.

nThe most commonly-used menus in the Menu Bar are available as buttons in Voice Editor’s toolbar.

File

New

Creates and opens a new Library ﬁle.

Open Library... (Open)

This is the same as the “Open” button in the Toolbar (page 8).

Save Library (Save)

This is the same as the “Save” button in the Toolbar (page 9).

Windows Macintosh

Save Library As... (Save As)

Lets you save the Library ﬁle under a new or different name.

Close (Macintosh only)

Close the window. This is the same as the “Close” box in the Title Bar.

Edit

Copy

Copies the selected voice to the clipboard. If nothing is selected, this item is grayed out.

Paste

Copies the voice from the clipboard to Voice Editor.

Edit

This is the same as the “Edit Window” button in the toolbar (page 12).

Library

This is the same as the “Library Window” button in the toolbar (page 14).

Store...

This is the same as the “Store” button in the toolbar (page 14).

Import...

This is the same as the “Import” button in the toolbar (page 13).

Compare

This is the same as the “Compare” button in the toolbar (page 15).

Windows Macintosh

Setup (Windows) / MIDI (Macintosh)

Setup (Editor Setup)

This is the same as the “Editor Setup” button in the toolbar (page 10).

Transmit Bulk... (Transmit)

This is the same as the “Transmit” button in the toolbar (page 11).

Receive Bulk... (Receive)

This is the same as the “Receive” button in the toolbar (page 12).

Monitor

This is the same as the “Monitor” button in the toolbar (page 12).

OMS Port Setup (Macintosh only)

Opens the OMS Port Setup window for Voice Editor. Refer to the section “OMS Port Setup”

(page 24) for further details.

OMS MIDI Setup (Macintosh only)

Opens the OMS MIDI Setup window. Refer to the documentation that came with OMS for further

details.

OMS Studio Setup (Macintosh only)

Opens the OMS Studio Setup window. Refer to the documentation that came with OMS for further

details.

Windows Macintosh

The Library Window

When you start Voice Editor, you will ﬁrst see the Library Window consisting of the “Normal” and

“Drums” tabs, each representing the voice type. Each tab lists all the names, numbers and

categories of voices in the selected voice type group. When you choose to edit a voice from the

Library Window by double-clicking it, the Edit Window for that voice will be opened.

nYou can save your settings as a Library ﬁle (*.S6V).

1Toolbar

This area holds the buttons controlling Voice Editor (page 8).

2Tabs

Click one of these to view the voice list for that group.

3Voice list

This area shows all the voices in the selected group as a scrollable list. The name, number and

Category of each voice are shown. You can rearrange the voices by dragging-and-dropping

their voice numbers to a new location.You can rename a voice in Windows by selecting the

voice name, then clicking on it again to enter a new name. On the Macintosh, you click on the

voice name while holding down [Control], choose “Edit Voice Name” from the pull-down menu

and enter the new name in the dialog.

nTo select a continuous block of voices, click the number of the ﬁrst voice, hold down the [Shift] key, then

click the last number.

nVoice names can consist of up to 8 characters.

Viewing Just the Voice Names (Windows)

You can view just the names of all voices in the group without their “Number” and “Category”

information. To do this, right-click on any part of the voice list and choose “List.” This may be

useful when choosing voices quickly, since you will have less scrolling to do.

nTo switch back to the full Voice Name/Number/Category list, right-click on any part of the voice list

and choose “Details.”

The Toolbar

1“Open” button

Click this to open the “Open File” dialog and select a Library ﬁle to open.

“Open Dialog

Select the desired Library ﬁle (extension: .S6V) and click [Open]. The contents of the selected

ﬁle are indicated in the Library Window.

nYou can also load S03 Library ﬁles (with extension: .S3V).

nIf you are using a Macintosh, the typical Macintosh “Open” dialog will appear.

1“Look in:” .................Click this and choose the folder containing the Voice Editor ﬁles.

2List box .....................Shows the contents of the current folder.

3[Open] button ...........Click this to open the ﬁle selected from the List.

4“Files of type:” .........Click this and choose the ﬁle type.

5“File name:” ...........Shows the name of the ﬁles selected from the List.

6[Cancel] button.........Click this to cancel the operation.

12 345678

2“Save” button

Click this to save the existing Library ﬁle with your new settings. If you are working on a new ﬁle,

this button will open the “Save As” dialog, where you can name and save your settings as a new

Library ﬁle (*.S6V).

“Save As…” Dialog

nLibrary ﬁle names can consist of up to 8 characters plus a 3-character extension.

nIf you are using a Macintosh, the typical Macintosh “Save As” dialog will appear.

1“Save in:”..................Click this and choose the folder in which to save the Library ﬁle.

2List box .....................Shows the contents of the folder you wish to save to.

3[Save] button ............Click this to save the Library ﬁle with the name speciﬁed in the

“File name:”.

4“File name:”..............Specify the name of the Library ﬁle to be saved here.

5“Files of type:” .........Click this and choose the ﬁle type.

6“Cancel”....................Click this to cancel the operation.

nS08 Library ﬁles can be imported to your synthesizer directly by saving them to the Memory card.

For details, refer to the S08 Owner’s Manual.

nIf you save a ﬁle to a Macintosh computer, the extension “.S6V” is not added automatically. Before

loading such ﬁles to the S08, you’ll need to manually add the extension “.S6V” to the ﬁle names.

3“Editor Setup” button

Click this to open the “Editor Setup” dialog and specify the MIDI Out port settings.

“Editor Setup” Dialog

This is where you set up the Voice Editor to allow the transmission of voice data to your

synthesizer. Click the [OK] button to apply the settings and quit the dialog. Click the [Cancel]

button to quit without applying the settings.

1“MIDI In Port:” ..........Click this and choose the MIDI In port. This allows you to receive

data from a device connected to this port. Select the port which

has been assigned to your particular synthesizer within the host

application.

2“MIDI Out Port:” .......Click this and choose the MIDI Out port. You can use the Voice

Editor to control and edit the device connected to this port. Select

the port which has been assigned to your synthesizer within the

host application.

nIf you are using a Macintosh, the MIDI Out Port setting is assigned in the OMS Port Setup. For

further details, see section “OMS Settings.” (page 23)

3“MIDI Ch:”.................Click this and choose the MIDI Out channel. This is used when

monitoring sounds using the on-screen keyboard in the Edit

Windows.

4“Device No.:”............Click this and choose the MIDI device number of your synthesizer.

5“Dump Interval:” ......Click this and choose the interval between successive MIDI

dumps.

nIf you set too short an interval, you may encounter errors when transmitting MIDI data.

Autres manuels pour S08 Voice Editor

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Yamaha Logiciel

Yamaha

Yamaha FIRESTATION MLAN PATCHBAY Manuel utilisateur

Yamaha

Yamaha Extension Manuel utilisateur

Yamaha

Yamaha File Utility Manuel utilisateur

Yamaha

Yamaha LS9-16 Manuel utilisateur

Yamaha

Yamaha Extension Manuel utilisateur

Yamaha

Yamaha Clavinova CVP-210 Manuel utilisateur

Yamaha

Yamaha M7CL StageMix V1.5 Manuel utilisateur

Yamaha

Yamaha CL3 Manuel utilisateur

Yamaha

Yamaha IMX644 Manager Manuel utilisateur

Yamaha

Yamaha LS9 Editor Manuel utilisateur

Yamaha

Yamaha LS9 Editor Manuel utilisateur

Yamaha

Yamaha mLAN Driver Manuel utilisateur

Yamaha

Yamaha DME Designer Manuel utilisateur

Yamaha

Yamaha A3000 Manuel utilisateur

Yamaha

Yamaha MOTIF RACK Music System Manuel utilisateur

Yamaha

Yamaha Sound Edge Manuel utilisateur

Yamaha

Yamaha M7CL StageMix V1.5 Manuel utilisateur

Yamaha

Yamaha Sound Editor ver. 2.10 Manuel utilisateur

Yamaha

Yamaha PM5D Manuel utilisateur

Yamaha

Yamaha mLAN mLAN Driver Manuel utilisateur

Yamaha

Yamaha PM1D Manager V2 Instructions et recettes

Yamaha

Yamaha HUB Manuel utilisateur

Yamaha

Yamaha LS9-16 Manuel utilisateur

Yamaha

Yamaha AE041 Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur