Xtreme Power Conversion A60-550 Mode d’emploi

A60 Standby UPS

550VA, 750VA Models

User & Installaon Manual

Xtreme Power Conversion Corporaon

A60 User’s Manual

Page 2

Uninterrupble Power Supply

Table of Contents

Installaon and Operaon............................................................................3

LCD Display..................................................................................................3

Product Overview........................................................................................ 3

LED Indicators..............................................................................................4

Safety Precauons.......................................................................................5

Troubleshoong...........................................................................................6

Specicaons...............................................................................................7

Obtaining Service.........................................................................................8

Xtreme Power Conversion Limited Warranty................................................9

Xtreme Power Conversion Corporaon

A60 User’s Manual

Page 3

Uninterrupble Power Supply

Installaon and Operaon

Inspecon

The following items are inside the box:

● UPS unit ● User manual

Remove the UPS from its package and inspect it for damage that may have occurred during shipping. If any dam-

age is discovered, re-pack the unit and return it to the place of purchase.

Connect to Ulity Power

Connect AC power cord to ulity power. Then, the UPS will start to charge inside baery. For best result, charge

the baery for 6 hours prior to inial use.

Plug in Equipment

Baery Backup Outlets (4 or 5)

Connect computer and monitor to the “Baery Backup” outlets. These outlets provide baery backup, EMI lter-

ing, line condioning, and surge protecon. Baery power is automacally provided in case of power failure.

Surge-Protected Outlets (4 or 5)

Connect a printer, fax machine, or scanner to the “Surge-protected” outlets. These outlets do not provide power

during power failure.

CAUTION: NEVER connect a laser printer or scanner to the baery backup sockets of UPS. The equipment may

draw signicantly power to overload the UPS.

Turn On/O the UPS

To turn on the UPS unit, press the power switch lightly. Then, the LED or LCD will light up. To turn o the UPS unit,

press the power switch again. Then, display will shut o.

Product Overview

1. LCD display or LED indicators (Please check LED or LCD secon for the details)

2. Power switch

3. AC input

4. Baery backup outlets

5. Surge-protected outlets

6. USB port (opon)

7. Modem/phone/network surge protecon (opon)

8. Coax surge protecon (opon)

9. USB charger port (opon)

Xtreme Power Conversion Corporaon

A60 User’s Manual

Page 4

Uninterrupble Power Supply

LED Indicators

LED Alarm UPS Status

● Green O The mains is normal and UPS is

operated normally.

*Yellow Sounding every ten seconds Power failure occurs and UPS is on

baery mode.

*Yellow Sounding every second Low baery

o Green Output voltage UPS is o

● Red Connuously sounding UPS fault

●LED on o LED O * LED ashing

Operaon Display

UPS Mode LCD Descripon

UPS Power on

When UPS is powered on, it will

enter this mode for 4 seconds.

AC Mode

LCD informaon will be displayed

in the following order when LCD is

touched.

1. Output voltage

2. Input voltage

3. Load level

4. Baery capacity

Overload in AC mode

icon will ash.

When overload occurs, alarm will

beep every 0.5 second.

Baery Mode

When battery level is low, icon will

ash.

Alarm will beep every 10 seconds

and LCD informaon will be dis-

played in the following order when

LCD is touched.

1. Output voltage

2. Input voltage

3. Load level

4. Baery capacity

Overload in baery mode

icon will ash.

When overload occurs, alarm will

beep every 0.5 second.

NOTE: If backlight shuts o, you may acvate it by touching the screen.

Xtreme Power Conversion Corporaon

A60 User’s Manual

Page 5

Uninterrupble Power Supply

Fault Code Table:

Fault condion LCD Soluons

Output short circuited Disconnect short-circuited loads

and restart the UPS again.

Overload fault Disconnect all output loads and

restart the UPS again.

Overcharge Call for service immediately.

Bad or severely discharged baery Please replace the baery.

High output voltage fault Call for service immediately.

If fault alarm occurs, please call for service immediately.

WARNING: Changes or modicaons not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.Turn UPS ON/ OFF

To turn the UPS unit on, press the Power switch on the front of the UPS. To turn the UPS unit o, press the Power

switch on the front of the unit again.

SAVE THESE INSTRUCTION-This manual contains important instrucons that should be

followed during installaon and maintenance of the UPS and baeries.

• This UPS ulizes voltage that may be hazardous. Do not aempt to disassemble the unit. The unit contains no

user replaceable parts. Only factory service personnel may perform repairs.

• This pluggable type A equipment with baery already installed by the supplier is operator installable and may

be operated by laymen.

• The mains socket outlet that supplies the UPS shall be installed near the UPS and shall be easily accessible.

• During the installaon of this equipment it should be assured that the sum of the leakage currents of the UPS

and the connected loads does not exceed 3.5mA.

• Connecon to any other type of receptacle other than a two-pole, three-wire grounded receptacle may result

in shock hazard as well as violate local electrical codes.

• In the event of an emergency, press the “OFF” buon and disconnect the power cord from the AC power sup-

ply to properly disable the UPS.

• Do not allow any liquids or any foreign object to enter the UPS. Do not place beverages or any other liquid-

containing vessels on or near the unit.

• This unit intended for installaon in a controlled environment (temperature controlled, indoor area free of

conducve contaminants). Avoid installing the UPS in locaons where there is standing or running water, or

excessive humidity.

• Do not plug the UPS input into its own output.

• Do not aach a power strip or surge suppressor to the UPS.

• Do not aach non-computer-related items, such as medical equipment, life-support equipment, microwave

ovens, or vacuum cleaners to UPS.

• A baery can present a risk of electrical shock and high short circuit current. The following precauons should

be observed when working on baeries:

Xtreme Power Conversion Corporaon

A60 User’s Manual

Page 6

Uninterrupble Power Supply

1) Remove watches, rings, or other metal objects from the hands.

2) Use tools with insulated handles.

3) Wear rubber gloves and boots.

4) Do not lay tools or metal parts on top of baeries.

5) Disconnect charging source prior to connecng or disconnecng baeries terminal.

6) Remove baery grounds during installaon and maintenance to reduce likelihood of shock.

• Unplug the UPS prior to cleaning and do not use liquid or spray detergent.

• Internal baery voltage is 12VDC.Sealed, lead-acid, 6-cell baery.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interfer-

ence in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does

cause harmful interference to radio or television recepon, which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separaon between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

• Do not dispose of baeries in a re as they may explode.

• Servicing of baeries should be performed or supervised by personnel knowledgeable of baeries and the

required precauons. Keep unauthorized personnel away from baeries.

• When replacing baeries, replace with the same number and type of sealed lead-acid baery.

• Do not open or mulate the baery or baeries. Release electrolyte is harmful to the skin and eyes. It may

be toxic.

• Aenon, hazardous through electric shock. Also with dis- connecon of this unit from the mains, hazardous

voltage sll may be accessible through supply from baery. The baery supply should be therefore discon-

nected in the plus and minus pole at the connectors of the baery when maintenance or service work inside

the UPS is necessary.

• To reduce the risk of overheang the UPS, do not cover the UPS’ cooling vents and avoid exposing the unit to

direct sunlight or installing the unit near heat eming appliances such as space heater or furnaces.

Troubleshoong

Condion Possible Causes Alarm

Nothing is displayed on the panel.

The UPS is not on. Press the power switch again to

turn on the UPS.

Baery voltage is too low. Charge the baery at least 6 hours.

Baery fault. Replace the baery.

The UPS always on baery mode Power cord loose. Re-plug the power cord.

The UPS connuously beeps. Please check the fault code for the

details.

Please check the fault code for the

details.

Backup me too short

The UPS is overloaded Remove some of the load from the

output of the UPS

Baery voltage is too low Charge the UPS at least 8 hours

Baery defect Replace the baery with the same

type of baery

Xtreme Power Conversion Corporaon

A60 User’s Manual

Page 7

Uninterrupble Power Supply

Specicaons

MODEL NUMBER A60-550 A60-750

CAPACITY Power rang 550VA (330W) 750VA (450W)

INPUT Voltage 110/120VAC

Frequency 50/60Hz auto-sensing

OUTPUT Voltage 110/120VAC

Waveform Simulated sine wave

Frequency 50Hz ± 1Hz or 60Hz

Transfer me 2–6ms

BATTERY Baery type Sealed, maintenance free lead acid

Baery quanty and size (1) 12V 4.5AH (1) 12V 5AH

Recharge 8 hours to 90% capacity

PHYSICAL UPS dimensions (W x D

x H) 6.2 x 12 x 3.7 in

UPS weight 5.7 lbs 6.4 lbs

Line cord 6 , 5-15P

Receptacles (10) NEMA 5-15R receptacles (5 baery back up + 5 surge only)

USB charging port N/A (2) USB A-type 5V, 2.4A

ENVIRONMENT Operang temperature 32–104°F (0–40°C)

Humidity 0–90%

Altude 11,500  above sea level

INDICATORS & Display 3 LED's Touch LCD

ALARMS Data Line Protecon N/A RJ-11 and RJ45 (10/100)

APPROVALS UL, cUL, RoHS, TAA

WARRANTY 3 years electronics, 3 years baery (USA and Canada)

COMMUNICATIONS INTERFACE USB and Cable

INCLUDED IN BOX USB Cable and User Manual

Xtreme Power Conversion Corporaon

A60 User’s Manual

Page 8

Uninterrupble Power Supply

Obtaining Service

If the UPS requires Service:

1. Use the TROUBLESHOOTING secon in this manual to eliminate obvious causes.

2. Verify there are no circuit breakers tripped.

3. Call your dealer for assistance. If you cannot reach your dealer, or if they cannot resolve the problem, call Xtreme

Power Conversion Corp Technical Support at 800.582.4524. Technical support inquiries can also be made at

[email protected]. Please have the following informaon available BEFORE calling the Technical Support

Department:

• Your name and address.

• The serial number of the unit.

• Where and when the unit was purchased.

• All of the model informaon about your UPS.

• Any informaon on the failure, including LED’s that may or may not be illuminated.

• A descripon of the protected equipment, including model numbers if possible.

• A technician will ask you for the above informaon and, if possible, help solve your problem over the

phone. In the event that the unit requires factory service, the technician will issue you a Return Mate-

rial Authorizaon number (RMA).

If you are returning the UPS to Xtreme Power for service, please follow these procedures:

1. Pack the UPS in its original packaging. If the original packaging is no longer available, ask the Technical Sup-

port Technician about obtaining a replacement set of packaging material. It is important to pack the UPS

properly in order to avoid damage in transit. Never use Styrofoam beads for a packing material.

2. Include a leer with your name, address, dayme phone number, RMA number, a copy of your original

sales receipt, and a brief descripon of the problem.

3. Mark the RMA number on the outside of all packages. Xtreme Power cannot accept any package without

the RMA number marked on the outside of the boxes.

4. Return the UPS by insured, prepaid carrier to the address provided by the Technician.

5. Refer to the Warranty statements in this manual for addional details on what is covered.

Xtreme Power Conversion Corporaon

A60 User’s Manual

Page 9

Uninterrupble Power Supply

Xtreme Power Conversion Limited Warranty

Xtreme Power Conversion (XPC) Corporaon warrants Xtreme Power Conversion equipment, when properly ap-

plied and operated within specied condions, against faulty materials or workmanship for a period of three years

for A60 Series products from the date of purchase. XPC Corporaon warrants internal baeries for a period of

three years from the date of purchase. For equipment sites within the United States and Canada, this warranty

covers repair or replacement, at the sole discreon of XPC Corporaon. The customer is responsible for the costs

of shipping the defecve product to XPC Corporaon. XPC Corporaon will pay for ground shipment of the re-

paired or replacement product. This warranty applies only to the original purchaser.

If equipment provided by XPC Corporaon is found to be Dead-on-Arrival (DOA), XPC Corporaon will be respon-

sible for the costs of shipping product to and returning equipment from the customer in a mely manner as agreed

to with the customer, once the customer has requested and received a Return Material Authorizaon (RMA)

number. DOA equipment is dened as equipment that does not properly funcon according to user documenta-

on when inially received and connected in conjuncon with proper procedures as shown in the user documen-

taon or via support provided by XPC Corporaon personnel or authorized agents.

This warranty shall be void if (a) the equipment is repaired or modied by anyone other than XPC Corporaon or

a XPC Corporaon approved third party; (b) the equipment is damaged by the customer, is improperly used or

stored, is subjected to an adverse operang environment, or is operated outside the limits of its electrical speci-

caons; or (c) the equipment has been used or stored in a manner contrary to the equipment’s operang manual,

intended use or other wrien instrucons. Any technical advice furnished by XPC Corporaon or a XPC Corpora-

on authorized representave before or aer delivery with regard to the use or applicaon of Xtreme Power Con-

version equipment is furnished on the basis that it represents XPC Corporaons best judgment under the situaon

and circumstances, but it is used at the recipient’s sole risk.

EXCEPT AS STATED ABOVE, XPC Corporaon DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

EXCEPT AS STATED ABOVE, IN NO EVENT WILL XPC Corporaon BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCI-

DENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF Xtreme Power Conversion EQUIPMENT,

including but not limited to, any costs, lost prots or revenue, loss of equipment, loss of use of equipment, loss

of soware, loss of data, cost of substutes, or claims by third pares. Purchaser’s sole and exclusive remedy for

breach of any warranty, expressed or implied, concerning Xtreme Power Conversion equipment, and the only

obligaon of XPC Corporaon under this warranty, shall be the repair or replacement of defecve equipment,

components, or parts; or, at XPC Corporaons sole discreon, refund of the purchase price or substuon of an

equivalent replacement product.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Xtreme Power Conversion UPS

Xtreme Power Conversion

Xtreme Power Conversion E90 Series Manuel utilisateur

Xtreme Power Conversion

Xtreme Power Conversion S70 Line?Interactive Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion A60 Standby Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion XVT?600 Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion NXRT?1000 Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion Pure Sine Wave Series Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion P80g Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion M90 Manuel utilisateur

Xtreme Power Conversion

Xtreme Power Conversion M90 Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion XST?400 Manuel utilisateur

Xtreme Power Conversion

Xtreme Power Conversion M90S Series Manuel utilisateur

Xtreme Power Conversion

Xtreme Power Conversion M90U Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion M90S Series Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion XVT Series Manuel d'utilisation

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA Manuel utilisateur

Xtreme Power Conversion

Xtreme Power Conversion P91c-1000 Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion P91g Series Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion 1000VA Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion P90 1000VA Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion TX90-1000 Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion XPRT 6/10KVA Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion P90L-ISO6MB Mode d’emploi

Xtreme Power Conversion

Xtreme Power Conversion 800VA P80 Series Mode d’emploi

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur