XtendLan DPP-D203 Manuel utilisateur

User Manual

Audio Phone

Read this manual carefully before using the product, and keep it well for future use.



DPP-D203

1. Parts and Functions

Side View

110 20

Speaker

Microphone

Unlock button

Talk button

Unlock 2nd/Intercom button

Indicator

Tone volume

controller

Talk volume

controller

Speaker Send out voice from the visitor.

Microphone Receive voice from the user.

Unlock button Press to release the door.

Talk button Press to communicate hands free with visitor

Unlock 2nd button/

Intercom button

During calling/talking state, press Unlock 2nd button to re-

lease the second door;

In standby mode, press Call button to activate the intercom

call.

Indicator Power and working indicator.

Tone volume con-

tronller Adjust the tone volume.

Talk volume con-

tronller Adjust the talk volume.

Key functions

2. Terminal Descriptions

L2 L1

L1, L2

DIP2

DIP1

1 2 3 4 5 6

ON DIP

1 2 3

L1,L2:Bus terminal.

DIP1(Bit1~6):Used to User Code setting.

DIP2(Bit1~3):Used to Slave Monitor Address or Extended Address setting.

3. Unit Mounting

1). Fix 2 screws to the wall at a appropriate height;

2). Connect the system correctly;

3). Attach the audio phone to the bracket.

4. Operation Instructions

5. Setup Instructions

1) Door release function: When visitor calls from outdoor station, the monitor rings,

press Talk button to talk with the visitor, then press the Unlock button to open the door.

If the system connect 2 locks, press Unlock 2nd button to open the second door.

2) Intercom call:When the monitor is in standby mode, press Unlock 2nd button/

Intercom button to activate the intercom call, all monitors connected to the system will

ring at the same time. whichever Monitor answers the call, conversation is started. and

the other monitors will stop ringing at the same time.(note that the user code must be

the same for all monitors to activate the intercom call function)

5.1 User Code Setting(DIP1 to set it)

In the DT system, every apartment must have a unique identication called User Code.

The DIP1 switches are used to congure the User Code for each Monitor.

• Bit-1~5 of DIP1 are used to User Code setting. The value is from 1 to 32, which

have 32 different codes for 32 apartments.

• Bit-6 of DIP1 is used to video match.

Bit state User Code Bit state User Code Bit state User Code

1 2 3 4 5 6

Code=1

1 2 3 4 5 6

Code=12

1 2 3 4 5 6

Code=23

1 2 3 4 5 6

Code=2

1 2 3 4 5 6

Code=13

1 2 3 4 5 6

Code=24

1 2 3 4 5 6

Code=3

1 2 3 4 5 6

Code=14

1 2 3 4 5 6

Code=25

1 2 3 4 5 6

Code=4

1 2 3 4 5 6

Code=15

1 2 3 4 5 6

Code=26

1 2 3 4 5 6

Code=5

1 2 3 4 5 6

Code=16

1 2 3 4 5 6

Code=27

5.2 Slave Address Or Extended Address Setting(DIP2 to set it)

When multi Monitors are installed in one apartment, these Monitors have to use the

same User Code setting, and the Master/Slave mode should be set on the Monitor.

• Bit-1~2 of DIP2 are used to slave address or extended address setting.

• Bit-3 of DIP2 is used to monitor matched setting, When Bit-3 set to ON / OFF, there

are different usages.

Bit state User Code Bit state User Code Bit state User Code

1 2 3 4 5 6

Code=6

1 2 3 4 5 6

Code=17

1 2 3 4 5 6

Code=28

1 2 3 4 5 6

Code=7

1 2 3 4 5 6

Code=18

1 2 3 4 5 6

Code=29

1 2 3 4 5 6

Code=8

1 2 3 4 5 6

Code=19

1 2 3 4 5 6

Code=30

1 2 3 4 5 6

Code=9

1 2 3 4 5 6

Code=20

1 2 3 4 5 6

Code=31

1 2 3 4 5 6

Code=10

1 2 3 4 5 6

Code=21

1 2 3 4 5 6

Code=32

1 2 3 4 5 6

Code=11

1 2 3 4 5 6

Code=22

5.2.1 When Bit-3 of DIP2 set to OFF, the Bit-1~2 of DIP2 are used to master/slave

address setting:

DIP2 state Master/Slave type

1 2 3

Master monitor

1 2 3

Slave monitor 1

1 2 3

Slave monitor 2

1 2 3

Slave monitor 3

5.3 Ring Tone Setting

1). There are four groups ring tones to choose for you:

5.2.2 When Bit-3 of DIP2 set to ON, the Bit-1~2 of DIP2 and Bit-1~5 of DIP1 are

used to extended address setting:

1 2 3 4 5 6

Code=33

1 2 3

DIP2 state DIP1 state User Code

1 2 3 4 5 6

Code=1

1 2 3

1 2 3 4 5 6

Code=2

1 2 3

.........

1 2 3 4 5 6

Code=31

1 2 3

1 2 3 4 5 6

Code=32

1 2 3

1 2 3 4 5 6

Code=34

1 2 3

.........

1 2 3 4 5 6

Code=63

1 2 3

1 2 3 4 5 6

Code=64

1 2 3

.........

1 2 3 4 5 6

Code=65

1 2 3

1 2 3 4 5 6

Code=66

1 2 3

1 2 3 4 5 6

Code=95

1 2 3

1 2 3 4 5 6

Code=96

1 2 3

1 2 3 4 5 6

Code=97

1 2 3

1 2 3 4 5 6

Code=98

1 2 3

1 2 3 4 5 6

Code=127

1 2 3

1 2 3 4 5 6

Code=128

DIP2 state DIP1 state User Code

Group name Items Songs

Group1 Door Station DINGDONG

Intercom Call TELEPHONE_RING

Group2 Door Station JINGLE_DELL

Intercom Call CARMAN

Group3 Door Station HAPPY_BIRTHDAY

Intercom Call SONATINE

Group4 Door Station DOREME

Intercom Call RHYTHM_OF_THE

2). Press and hold Talk button in standby mode to enter the state of ring tone setting,

and then each time you press Unlock 2nd button to replace a group of ring tones. Four

groups ring tones cycle:

Group1 Group2 Group3 Group4.

press Unlock 2nd press Unlock 2nd press Unlock 2nd

press Unlock 2nd

3). Press Talk button to exit the setting.

6. Specication

The design and specications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved.

●Power Supply: DC24V

●Power Consumption: standby 16mA,working 56mA

●Working Temperature: -15ºC ~ +55ºC;

●Wiring: 2 wires, non-polarity

●Dimension: 88(H)X110(W)X20(D)mm

Table des matières

Autres manuels XtendLan Système d'interphone

XtendLan

XtendLan XL-DM327G Manuel utilisateur

XtendLan

XtendLan DPC-D241-1 Manuel utilisateur

XtendLan

XtendLan DPC-D218ID Manuel utilisateur

XtendLan

XtendLan DPC-W110-ID Manuel utilisateur

XtendLan

XtendLan DPC-D244-K Manuel utilisateur

XtendLan

XtendLan DPC-D248-K Manuel utilisateur

XtendLan

XtendLan DPM-571 Manuel utilisateur

XtendLan

XtendLan DPC-D247 Manuel utilisateur

XtendLan

XtendLan DPM-451 Manuel utilisateur

XtendLan

XtendLan DPM-473M Manuel utilisateur

XtendLan

XtendLan DPM-535 Manuel utilisateur

XtendLan

XtendLan GSM DPC-G100 Manuel utilisateur

XtendLan

XtendLan DPC-434 Series Manuel utilisateur

XtendLan

XtendLan DPC-IP101ID Manuel utilisateur

XtendLan

XtendLan DPC-D268 Manuel utilisateur

XtendLan

XtendLan DPM-473AD Manuel utilisateur

XtendLan

XtendLan DPC-441 Manuel utilisateur

XtendLan

XtendLan DPC-518ID Manuel utilisateur

XtendLan

XtendLan DPG-IP-G21 Manuel utilisateur

XtendLan

XtendLan DPC-D244-R Manuel utilisateur

XtendLan

XtendLan DPK-242 Manuel utilisateur

XtendLan

XtendLan DPM-IP700 Manuel utilisateur

XtendLan

XtendLan DPM-D271TMD Manuel utilisateur

XtendLan

XtendLan DPP-D202 Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur