Winmate 7'' S-Series Manuel utilisateur
Please read these instructions carefully before using this product, and save this manual for future use.
7” S-Series HMI
W07IB3S-PCM1AC
W07IB3S-PCM1
Quick Start Guide
V1.2
For more information on this and other Winmate
products, please visit our website at:
www.winmate.com
Document Part Number: 9152070I1002
ii
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
class "B" digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at him own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
This equipment is in conformity with the requirement of the following EU
legislations and harmonized standards. Product also complies with the
Council directions.
iii
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in
any form or by any means, electronic or mechanical, for any purpose, without the
prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order
to improve design and/or performance. We assume no responsibility or liability
for the use of the described product(s) conveys no license or title under any
patent, copyright, or masks work rights to these products, and make no
representations or warranties that these products are free from patent, copyright,
or mask work right infringement, unless otherwise specified. Applications that are
described in this manual are for illustration purposes only. We make no
representation or guarantee that such application will be suitable for the specified
use without further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from
material and workmanship defects for a period of one year from the invoice date.
If the customer discovers a defect, we will, at his/her option, repair or replace the
defective product at no charge to the customer, provide it is returned during the
warranty period of one year, with transportation charges prepaid. The returned
product must be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by over 30 days,
the in-warranty service will be made according to the shipping date. In the serial
numbers the third and fourth two digits give the year of manufacture, and the fifth
digit means the month (e. g., with A for October, B for November and C for
December).
For example, the serial number 1W16Axxxxxxxx means October of year 2016.
iv
Customer Service
We provide a service guide for any problem by the following steps: First, visit the
website of our distributor to find the update information about the product.
Second, contact with your distributor, sales representative, or our customer
service center for technical support if you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business
day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.
v
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-ci. Ne pas brancher de connections
lorsque l’alimentation est présente. Des composantes
électroniques sensibles peuvent être endommagées par des sauts
d’alimentation. Seulement du personnel expérimenté devrait ouvrir
ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic components
in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements
électroniques moderns sont très sensibles aux décharges
d’électricité statique. Toujours utiliser un bracelet de mise à la
terre comme précaution. Placer toutes les composantes
électroniques sur une surface conçue pour dissiper les charge, ou
dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.
vi
CONTENTS
INTRODUCTION 7
Features 7
Package Contents 8
Product Overview 10
GETTING STARTED 11
Turning On Your Device 11
Operating the HMI Device 12
Hot Tab Menu 12
Utilities 12
Brightness 13
Volume 13
Testing LED Light Bar 14
Performance 14
Touch Lock 14
Using Front Camera 15
Camera Interface 15
Shooting Photos 16
Recording Videos 17
Camera Settings 18
Turning Off Your Device 19
INSTALLATION 20
Wiring Requirements 20
Connecting to Other Devices 21
Power Input Connector 21
Serial Port Connector 21
RJ45 Connector 21
USB A Type Connector 22
Mounting 23
Panel Mounting 23
VESA Mounting 24
Glass Wall Mounting 28
SPECIFICATIONS 29
APPENDIX 31
Appendix A: Cleaning the Monitor 31
Appendix B: Winmate Software Development Kit 32
Winmate Download Center 32
Winmate File Share 32
7
INTRODUCTION
Congratulations on purchasing Winmate® 7” S-Series HMI. Interactive and smart
automation systems of intelligent buildings are in a fast growing phase.
Winmate® multi-touch S-Series HMI is suitable for home automation and room
management systems. Flat surface is easy-to-clean and delivers aesthetically
pleasing look for any interior. By connecting to centralized database, it can
provide real time update for booking status and available schedule, or perform as
a synchronous display in meetings.
Winmate® 7” S-Series HMI powered by Intel® Celeron® N2930 processor and
support Windows 10 IoT, Windows Embedded 8.1 Industry Pro, Windows
Embedded 8 Standard, and Windows Embedded Standard 7 –WS7P operating
systems. The HMI device features P-Cap touch-screen. In addition, the HMI
device model supports an exceptional feature - LED Light Bar. With the help of
red, green, blue and orange LED indicators you can see the status of the
machine or processes afar. It significantly reduces power consumption by
keeping the display turned off.
Features
Winmate® 7” S-Series HMI features:
7”, 1024 x 600 with Projected Capacitive Multi-Touch P-CAP) touchscreen
Intel® Celeron® N2930 1.83GHz
Fanless cooling system and Ultra-low power consumption
Front IP65 water and dust proof, rear IP22
Dual Gigabit Ethernet
RGB LED Status Light Bar
Optional 2MP Front Camera
Stylish design for room booking, access control and room information
applications
8
Package Contents
Carefully remove the box and unpack your device. Please check if all the items
listed below are inside your package. If any of these items are missing or
damaged contact us immediately.
Standard factory shipment list:
7” HMI Device
Quick Start Guide
(Hardcopy)
Driver CD & User
Manual
Varies by product
specifications
9152070I1002
IB32: 9171111I101Y
AC Adapter
(12V/ 50W)
Power Cable
VESA Plate
75 x 75 mm
922D050W12VA
Varies by country
82W70J17Y700
VESA Mounting
Screws
913511101145
9
Package may include optional accessories based on your order:
VESA Desk Stand
PCVS-V1
VESA Desk Stand
LA-100
VESA Wall Mount
Bracket
LA-106
99KK00A0000E
9B0000000128
9B0000000412
Glass Wall Mount Kit
Right: PCGM-V1L
Left: PCGM-V1L
Right: 99KN00A00013
Left:99KN00A00012
10
Product Overview
No.
Description
No.
Description
RJ-45 (LAN)
1 Watt Speaker
USB 3.0, USB 2.0
2MP Front Camera (Optional)
RS-232/422/485
RGB LED Light Bar
(W07IB3S-PCM1AC only)
12V DC Terminal Block
⑨
HF RFID Reader (Optional)
RJ-45 (LAN/ PoE)
*Note: RGB LED light bar only available for the model number W07IB3S-PCM1AC
Autres manuels pour 7'' S-Series
7
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Winmate écran tactile
Winmate
Winmate M-Series Manuel utilisateur
Winmate
Winmate R12IKWS-MHM2 Manuel utilisateur
Winmate
Winmate W10L100-PCH1-PoE Manuel utilisateur
Winmate
Winmate W10IB3S-PCH2LB Manuel utilisateur
Winmate
Winmate R12IBWS-MHM2 Manuel utilisateur
Winmate
Winmate W07IB3S-PCM1AC-POE Manuel utilisateur
Winmate
Winmate R15FA3S-PTC3 Manuel utilisateur
Winmate
Winmate R10IBWS-MHT2 Manuel utilisateur
Winmate
Winmate FM10Q Manuel utilisateur
Winmate
Winmate M-Series Manuel utilisateur
Manuels écran tactile populaires d'autres marques
Elecro Engineering
Elecro Engineering Poolsmart Plus Instructions d'installation
Johnson Controls
Johnson Controls IQ4 HUB Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET2270L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET1002L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems 3201L Manuel utilisateur
Duratec
Duratec S15 Manuel utilisateur
