Winix ZERO Pro Manuel utilisateur

Model

ZERO Pro

User Manual

WINIX AIR PURIFIER

Use & Care

Guide

•Please read and follow all safetyrulesandinstructions

in this manual beforeoperating.

•The product warranty is printed on the back of this

guide, so please keep it in a safe place for future use.

English

ZERO Pro 2

CONTENTS

5-STAGE AIR PURIFICATION········································································3

CONTROLS ·································································································4

WHERE TO USE···························································································5

INSTALLING THE FILTERS·················································································6

SAFETY AND CAUTIONS ·············································································8

INITIAL OPERATION ···················································································9

AUTO AND SLEEP ·····················································································10

MANUAL MODE, TIMERAND PLASMAWAVE®··························································································11

CHILD LOCK, AIR QUALITY LED ·································································12

FILTER CARE ·····························································································13

PARTICLE SENSOR CARE ··········································································· 17

CLEANING CARE·······················································································18

FREQUENTLY ASKED QUESTIONS ·····························································19

UNIT SPECIFICATIONS ·············································································· 21

PRODUCT WARRANTY ·············································································22

French ································································································24

Spanish·······························································································47

German ······························································································70

Italian·································································································93

▶This product is suitable for 220 - 240 V only.

English

ZERO Pro 3

User Manual

Pre-filter/AOC™ Carbon Filter/

True

HEPA filter with

Cleancel™

(Included with theproduct.)

Product

User Manual

WINIX AIR PURIFIER

Model ZERO Pro (AZPU370-IWB)

Please read and follow all safety

rules a nd inst r uct io ns

Use & Care i n thi s ma n ual before op er at i ng.

Guid e The produc t

STAGE AIR PURIFICATION

PlasmaWave

Cleancel™

(Anti-microbial coated)

True HEPA filter

replaceable

AOC™

(Advanced Odor Control)

Carbon Filter

replaceable

Pre-filter

washable

English

ZERO Pro 4

CONTROLS

Air Outlet Vent

Light Sensor

Detects the amount of

ambient light within

the environment, to

adjust thebrightness

oftheLED indicators.

Reset Button

After replacing a filter,

press the RESET button

for at least 5 seconds.

Timer Indicator

If timer has been set,

the LED light Indicates

the set time of operation.

Child Lock Button

Smart Sensor

Automatically

detects indoorair

quality.

PlasmaWave Indicator

Indicates whether

PlasmaWave is

enabled or disabled.

Press and hold for 3 seconds

to enable or disable the Child

Lock mode. LED light indicates

whether Child Lock mode is

enabled or disabled.

Power Button

Turns the unit on

or off.

PlasmaWave Button

Enables or disables

PlasmaWave .

Timer / Air Quality Button

Press to cycle through and set

desired length of operation

(1hr, 4hr, 8hr, [NO TIMER]).

Check Filter

Indicator

LED light indicates

when it is time to

change the filter.

Mode / Fan Speed Button

Every time the Mode button is

pressed, the Mode LED light will

cycle through the settings. (Auto,

Sleep, Low, Medium,High, Turbo)

Press and hold for 3 seconds to

enable or disable the Air Quality

light.

English

ZERO Pro 5

30~46 cm

Follow theseinstructions to reduce the risk of serious injury

or death and to reduce risk of damaging the unit.

WARNING

Do not place in excessively humid areas

where unit may become wet.

Do not place below any electrical outlet.

Do not have unit facing into wind or draft.

Do not place near any flammable

materials (aerosols, fuel, gases etc.).

Do not place in an area with excessive

amounts of noxiousgases.

Do not install in any sort of motor or

transport

vehicle(trucks,boats,

ships,

etc.).

Do not place around heatingelements.

Do not use around mist or fumes from

industrial

oil or around large quantities

metallic dust.

WHERE TO USE

Allow 30 ~ 46 cm. of space between TVs, radios, and other electronic products

electromagnetic interference from certain electronics may cause product malfunction.

Place indoors away from direct sun light

direct exposure may cause product malfunction or failure.

Only place on hard, flat surfaces

flimsy or slanted surfaces may result in abnormal noise and vibrations.

※ This unit is not intended to be used to preserve documents or in art conservation.

INSTALLING THE FILTERS

English

ZERO Pro 6

• Refer to pages 15 - 18 for detailed information on filter care

and how to replacethem.

Note

This product comes with all of the required filters. The protective plastic wrap must be

removed from the filters before use.

※ Operating the unit without removing the plastic wrap may result in product failure.

※ Unplug and make sure the unit is turned off before installing filters.

※ The unit will automatically power off when front panel is opened.

①Remove the front panel by grasping its

upper edge and gently pulling towards

yourself.

• Toremovethe front panel, the latch at

the lower edge of the panel must be

released from its position.

②Remove the filtersfrom the unit, they are

protected inside a plastic wrap.

③ Remove filters from protective plastic wrap.

• Operating the unit without removing

filters from plasticmaycauseabnormal

noise,deformation, or fireas aresult of

overheating.

Latch

INSTALLING THE FILTERS

English

ZERO Pro 7

This unit

is compatible

with

ﬁlter

ITEM: 1712-0093-01

FILTER

④Install the filters until they fit securely in

place.

Filters must be installed in this order:

3 ,4 True HEPA filter with Cleancel™ (rear)

2 AOC™ Carbon Filter (middle)

1 Pre-filter (front)

• To install the pre-filter, insert bottom tabs

into the slots on either side of the lower part

of the unit, then rotate upward to insert the

upper tabs into the slots at the top part of

the unit until both sides audibly click into

place.

⑤ Replace the front panel by first inserting

the latch at the bottom edge into the

base of the unit, then rotate the panel

upward toward the top of the unit until it

magnetically snaps closed.

⑥ When to service and replace filters:

Filter Indicator Light When to

service

When to

replace

1 Pre-filter none

Clean once every

14 days Permanent

2 AOC™ Carbon Filter

Clean once every

3 months

Lasts up to

6~12 months

3 ,4 True HEPA filter

with Cleancel™

Can NOT be

WASHED

※ Intervals between filter replacement may vary depending on environment.

※

For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of

other filters.

4 True HEPA

3 filter with

Cleancel™

2 AOCTM

Carbon

Filter

1 Pre-filter

SAFETY AND CAUTIONS

English

ZERO Pro 8

Follow these instructions to reduce the risk of serious

injury or death and to reduce risk of damaging the unit.

WARNING

※If the supply cord is damaged, it must be replaced by a special cord or assembly

available from the manufacturer or its service agent.

※ This appliance is not intended for use by a person (including children) with reduced

physical sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for theirsafety.

※ Children should be supervised to ensure that they do not play with the appliance.

Cord can become damaged by forcefully

bending, pulling, twisting, bundling,

pinching or placing heavy objects on it.

Unplug unit when not in operation for

extended periods oftime.

Do not touch the plug with wet hands.

Do not plug additional appliances into

the same outlet or power supply.

Do not unplug or move the unit while in

operation.

If the unitbecomes submerged in water,

unplugit and contact customer service.

Do not tie or knot power cord when unit

is in operation.

Do not pull on the power cord when

unplugging the unit.

Beforeoperatingthis equipment,carefully readand followthesesafetycautionsand

instructions to avoid damage and ensure safe use.

Ensure filters are inserted before running unit

running unit without filters can shorten the units life and cause electric shock or injury.

Be sure foreign objects are NOT inserted into the vents on the unit

objects can include pins, rods, and coins.

Do not touch any part of the interior of the unit with wet hands

the high voltage may cause electric shock.

Ensure unit intake and outlet vents do not become blocked

blockage may lead to increased internal temperatures causing product failure and

deformation.

Do not use the unit as a step stool or place heavy objects on it

personal injury may occur or product failure and deformation.

INITIAL OPERATION

English

ZERO Pro 9

• During the first 4 minutes of power up, the Air Quality light

will flash as the Smart Sensors measure the air quality in

the

environment, after which normal operation will begin.

Note

• InAuto mode, as the indoor air quality improves, the fan

speed will automatically be reduced to Low.

•

When the unit is running, you may hear a chirping or

buzzing

sound. The sound is from large particles passing through

PlasmaWave®, it is normal and does not signify product

failure. To disable PlasmaWave

, see page 11.

Note

① Insert the unit plug into an electrical outlet.

• The Control Panel lights will turn on and

off.

② Press the ‘Power’ button.

③Bydefault,whenthe unitfirst powerson, the

mode will be set to Auto with PlasmaWave®

enabled.

• When in Auto Mode the fan speed will

be automatically adjusted according to

the environments airquality.

• PlasmaWave® works to removeharmful

airborne contaminants.

AUTO AND SLEEP

Every time the Mode button is pressed, the Mode LED light will cycle through the

settings. (Auto, Sleep, Low, Medium, High, Turbo)

English

ZERO Pro 10

• When in Auto Mode the fan speed is automatically adjusted

according to the indoor air quality. As the indoor air

quality

improves, the fan speed will automatically be reduced. If

the

indoor air quality decreases the fan speed will

automatically

be increased.

•

When unit is first started, Auto Mode is enabled and set to

Low fan speed.

Note

• When Sleep mode is selected, the fan speed is automatically

set to Low. Fan speed can be changed by pressing the Fan

Speed (Mode) Button.

• WhenSleep Mode is enabled, the Air Quality light is disabled.

Note

Auto Mode

Enables Auto operation based on the unit's air quality Smart Sensors.

① Press the Mode button to select Auto mode.

• The mode LED light will indicate when

‘Auto’ mode has been selected, and

operation will begin.

• Each time the Mode button is pressed,

the modes will be cycled. (Auto, Sleep,

Low, Medium, High,Turbo).

Sleep Mode

① Press the Mode button to select Sleep mode.

• The mode LED light will indicate when

‘Sleep’ mode has been selected, and

operation in that mode will begin.

Autres manuels pour ZERO Pro

Table des matières

Autres manuels Winix Purificateur d'air

Winix

Winix AUS-0850AAPU Manuel utilisateur

Winix

Winix HR950 Manuel utilisateur

Winix

Winix NK300 Manuel utilisateur

Winix

Winix ZERO 4 Manuel utilisateur

Winix

Winix NK305 Manuel utilisateur

Winix

Winix AZNU230-HWE Manuel utilisateur

Winix

Winix PlasmaWave 5300 Manuel utilisateur

Winix

Winix AAPU500-JLE Manuel utilisateur

Winix

Winix AM90 Manuel utilisateur

Winix

Winix ZERO AZBU330-HWE Manuel utilisateur

Winix

Winix Zero AUS-1050AZBU Manuel utilisateur

Winix

Winix D480 Manuel utilisateur

Winix

Winix HR900 Manuel utilisateur

Winix

Winix 9500 Manuel utilisateur

Winix

Winix 9500 Manuel utilisateur

Winix

Winix 5500-2 Manuel utilisateur

Winix

Winix 9800 Manuel utilisateur

Winix

Winix T1 Manuel utilisateur

Winix

Winix A231 Manuel utilisateur

Winix

Winix PlasmaWave 5300 Manuel utilisateur

Winix

Winix ZERO+ Manuel utilisateur

Winix

Winix PlasmaWave WACU300 Manuel utilisateur

Winix

Winix AW107 Manuel utilisateur

Winix

Winix C545 Manuel utilisateur

Manuels Purificateur d'air populaires d'autres marques

IKEA

IKEA UPPÅTVIND Manuel utilisateur

Nash

Nash AP-1 PureSmart Manuel utilisateur

LG PH-U450 Series Manuel utilisateur

DeLonghi

DeLonghi DDSX 220WFA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuel utilisateur

Sharp

Sharp FU-40SE Manuel utilisateur

Philips

Philips AC2721 Manuel utilisateur

Hitachi

Hitachi EP-A3000 Manuel utilisateur

TruSens

TruSens Z-2000 Manuel utilisateur

Motorola

Motorola MBP87SN Manuel utilisateur

Beko

Beko ATP 7100I Manuel utilisateur

Carrier

Carrier INFINITY 1620 Manuel utilisateur

AtmosAir

AtmosAir P2002 Manuel utilisateur

Friedrich

Friedrich C-90A Instructions d'utilisation et d'installation

Surgically Clean Air

Surgically Clean Air JADE2.0 Manuel utilisateur

Base aire

Base aire 555 Pro Manuel utilisateur

Champion

Champion CP25 Manuel utilisateur

vollara

vollara Air & Surface Pro+ Manuel utilisateur