WIKA TFT35 Manuel utilisateur
DE
EN
Operating instructions
Betriebsanleitung
Mode d’emploi
Manual de instrucciones
FR
ES
Examples/Beispiele/Exemples/Ejemplos
Compact temperature transmitter, model TFT35
Kompakt-Temperaturtransmitter, Typ TFT35
Transmetteur de température compact, type TFT35
Transmisor de temperatura compacto, modelo TFT35
2
14252337.02 03/2018 EN/DE/FR/ES
WIKA operating instructions model TFT35
DE
EN
FR
ES
Operating instructions model TFT35 Page 3 - 22
Betriebsanleitung Typ TFT35 Seite 23 - 42
Mode d‘emploi type TFT35 Page 43 - 62
Manual de instrucciones modelo TFT35 Página 63 - 82
© 01/2018 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA®is a registered trademark in various countries.
WIKA®ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d‘emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta!
EN
WIKA operating instructions model TFT35
14252337.02 03/2018 EN/DE/FR/ES
3
Contents
Contents
1. General information 4
2. Design and function 5
3. Safety 7
4. Transport, packaging and storage 12
5. Commissioning, operation 14
6. Maintenance and cleaning 17
7. Dismounting, return and disposal 18
8. Specications 21
EN
14252337.02 03/2018 EN/DE/FR/ES
4
WIKA operating instructions model TFT35
1. General information
■
The compact temperature transmitter described in the operating
instructions has been designed and manufactured using state-of-the-
art technology. All components are subject to stringent quality and
environmental criteria during production. Our management systems
are certied to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on
handling the instrument. Working safely requires that all safety
instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and
general safety regulations for the instrument's range of use.
■
The operating instructions are part of the product and must be kept
in the immediate vicinity of the instrument and readily accessible to
skilled personnel at any time. Pass the operating instructions on to the
next operator or owner of the instrument.
■
Skilled personnel must have carefully read and understood the
operating instructions prior to beginning any work.
■
The general terms and conditions contained in the sales
documentation shall apply.
■
Subject to technical modications.
■
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: TE 67.18
- Application consultant: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
1. General information
EN
WIKA operating instructions model TFT35
14252337.02 03/2018 EN/DE/FR/ES
5
2. Design and function
2.1 Overview
Electrical connection
Neck tube
Compression tting
Thermowell
2.2 Description
The model TFT35 temperature transmitter consists of a thermowell
with a xed process connection or a compression tting and is screwed
directly into the process. It is designed to be impact and vibration
resistant and all electrical components are protected against humidity
(IP65).
2. Design and function
EN
14252337.02 03/2018 EN/DE/FR/ES
6
WIKA operating instructions model TFT35
The vibration resistance conforms to EN 60068-2-6 (10 g, dependent on
the instrument version).The electrical connection is made via an angular
connector per DIN EN 175301-803 or an M12 x 1 circular connector.
2.3 Dimensions in mm
2.4 Scope of delivery
Cross-check scope of delivery with delivery note.
14253699.01
Angular connector
DIN EN 175301-803
Circular
connector
M12 x 1
with neck
tube
with
compression
tting
without process
connection
Legend:
U1Insertion length
ØF1Thermowell diameter
M Neck tube length
E Process connection
2. Design and function
EN
WIKA operating instructions model TFT35
14252337.02 03/2018 EN/DE/FR/ES
7
3. Safety
3.1 Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result
in serious injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result
in light injuries or damage to property or the environment, if
not avoided.
DANGER!
... identies hazards caused by electrical power. Should the
safety instructions not be observed, there is a risk of serious
or fatal injury.
WARNING!
... indicates a potentially dangerous situation that can result
in burns, caused by hot surfaces or liquids, if not avoided.
Information
... points out useful tips, recommendations and information
for ecient and trouble-free operation.
3.2 Intended use
The model TFT35 compact temperature transmitter is used for
temperature measurement of liquid and gaseous media in the range
-50 ... +200 °C (-58 ... +392 °F).
It can be used for pressures up to 40 bar. All electrical components are
protected against splash water and are designed to withstand vibration.
3. Safety
EN
14252337.02 03/2018 EN/DE/FR/ES
8
WIKA operating instructions model TFT35
The integrated thermowell with xed threaded connection or adjustable
compression tting enables direct installation into the process. All wetted
parts and also the case are from stainless steel.
The case and the exchangeable measuring insert are screwed together
using a knurled nut.This enables the exchange of the measuring insert
without having to remove the instrument from the process.
Through the integrated coupler connector, simple installation of the
transmitter is ensured.
The integrated electronics convert the temperature-dependent
resistance signal of the measuring element into a linear unit signal. For
the signal outputs, 4 ... 20 mA, 0 ... 10 V and also 0.5 ... 4.5 V ratiometric
are available.
This instrument is not permitted to be used in hazardous areas!
The instrument has been designed and built solely for the intended use
described here, and may only be used accordingly.
The technical specications contained in these operating instructions
must be observed. Improper handling or operation of the instrument
outside of its technical specications requires the instrument to be taken
out of service immediately and inspected by an authorised WIKA service
engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
3. Safety
EN
WIKA operating instructions model TFT35
14252337.02 03/2018 EN/DE/FR/ES
9
3. Safety
3.3 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous
situations and injuries.
▶Refrain from unauthorised modications to the instrument.
▶Do not use the instrument within hazardous areas.
▶Do not use the instrument with abrasive or viscous media.
Any use beyond or dierent to the intended use is considered as
improper use.
Do not use this instrument in safety or emergency stop devices.
3.4 Responsibility of the operator
The instrument is used in the industrial sector.The operator is therefore
responsible for legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the
safety, accident prevention and environmental protection regulations for
the application area must be maintained.
The operator is obliged to maintain the product label in a legible
condition.
To ensure safe working on the instrument, the operating company must
ensure
■
that suitable rst-aid equipment is available and aid is provided
whenever required.
■
that the operating personnel are regularly instructed in all topics
regarding work safety, rst aid and environmental protection
and know the operating instructions and in particular, the safety
instructions contained therein.
■
that the instrument is suitable for the particular application in
accordance with its intended use.
■
that personal protective equipment is available.
EN
14252337.02 03/2018 EN/DE/FR/ES
10
WIKA operating instructions model TFT35
3.5 Personnelqualication
WARNING!
Riskofinjuryshouldqualicationbeinsucient!
Improper handling can result in considerable injury and
damage to equipment.
▶The activities described in these operating instructions
may only be carried out by skilled personnel who have the
qualications described below.
▶Keep unqualied personnel away from hazardous areas.
Skilled electrical personnel
Skilled electrical personnel are understood to be personnel who,
based on their technical training, know-how and experience as well
as their knowledge of country-specic regulations, current standards
and directives, are capable of carrying out work on electrical systems
and independently recognising and avoiding potential hazards.The
skilled electrical personnel have been specically trained for the work
environment they are working in and know the relevant standards and
regulations.The skilled electrical personnel must comply with current
legal accident prevention regulations.
Special operating conditions require further appropriate knowledge, e.g.
of aggressive media.
3. Safety
Table des matières
Langues :
Autres manuels WIKA Instrument de mesure
WIKA
WIKA PG43SA-S Manuel utilisateur
WIKA
WIKA DG-05 Manuel utilisateur
WIKA
WIKA SENSeOR AMS01 Manuel utilisateur
WIKA
WIKA TC82 Mode d'emploi
WIKA
WIKA A-IAI-1 Manuel utilisateur
WIKA
WIKA DIH50-F Manuel utilisateur
WIKA
WIKA CTD9300 Series Manuel utilisateur
WIKA
WIKA 2XX.34 Guide produit
WIKA
WIKA DIH10-Ex Manuel utilisateur
WIKA
WIKA TR12 Series Mode d'emploi
WIKA
WIKA 891.34 Manuel utilisateur
WIKA
WIKA DPG40 Manuel utilisateur
WIKA
WIKA CPH62I0-S1 Manuel utilisateur
WIKA
WIKA DELTA-trans DPGT40 Manuel utilisateur
WIKA
WIKA IBF1 Manuel utilisateur
WIKA
WIKA 55 Series Mode d'emploi
WIKA
WIKA TC80 Manuel utilisateur
WIKA
WIKA A-AS-1 Manuel utilisateur
WIKA
WIKA IPT-2 Series Manuel utilisateur
WIKA
WIKA TR10-B Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur