WiebeTech FW8 Manuel utilisateur

F i r e 8 0 0 U s e r M a n u a l - 1 -

Fire800™

User’s Manual

Revised July 3, 2007

WiebeTech LLC

F i r e 8 0 0 U s e r M a n u a l - 2 -

Table of Contents

Chapter 1

Introduction

The Fire800 3

Available Interfaces 3

Features 3

Over Voltage Protection (OVP) 3

Low Voltage Detection (LVD) 3

Inverse-Polarity Protection 3

Automatic Detection of the Interface 3

LED Indicator (Double Colored LED) 3

System Requirements 4

PC Requirements 4

MAC Requirements 4

Package Contents 4

Chapter 2

Installing the

HDD

Preparing the Enclosure 4

Hard Drive Assembly 5

Chapter 3

System Set

Connection to Your Computer 5

Installation on a PC (Microsoft Windows) 5

WIN2000 or WINXP With a USB or FireWire Connection 5

WIN98SE with a FireWire Connection 6

WIN98/SE with a USB Connection 6

Unplug Procedure 6

Installation on a MAC (APPLE MAC OS) 6

MAC OS 9.X or MAC OS 10.X With a FireWire or USB Connection 6

MAC OS 10.2 or 10.3 With a FireWire 800 or USB 2.0 Connection 6

Unplug Procedure 6

Partitioning & Formatting 7

PC Running WIN98/SE or WINME 7

PC Running WIN2000 or WINXP 7

MAC OS 8

Technical

Questions

About this

anual

WiebeTech LLC

F i r e 8 0 0 U s e r M a n u a l - 3 -

Chapter 1 – Introduction

The Fire800

The 'Alumni Fire800' provides cutting-edge technology with maximum durability, flexibility and practical

design. Passive cooling through the aluminum casing eliminates the need for an onboard fan, therefore

making this the ideal solution for a quiet environment.

Product Dimensions: 22.5cm x 13.0cm x 4.0cm (8.86” x 5.12” x 1.58”)

Available Interfaces

• USB 2.0 High Speed

• FireWire 1394a

• FireWire 1394a & USB 2.0

• FireWire 1394a & FireWire 800 & USB 2.0

Features

Over Voltage Protection (OVP) with a limit of 10% before shut down (max 30V). Use protection for

device or Hard Drive. Damage can be caused by sudden voltage spikes in the power supply and wrong or

faulty power adapter.

Indication: Blue LED off, Red LED on

Low Voltage Detection (LVD) indicating insufficient power supply. This can be possibly caused by a

sudden voltage slump in the power supply or faulty power adapter.

Indication: Blue LED on, Red LED on

Inverse-Polarity Protection to prevent any damage to the device or Hard Drive caused by using a wrong

adapter.

Correct: internal+, external-

Automatic Detection of the Interface for Combo Interface Units, which means that there is no

mechanical switch required. The first cable detached will be the one used by the system until unplugged.

If a second cable is plugged in, it will not affect the system at all and can be used as soon as the main

cable is unplugged.

LED indicator (double colored LED)

Blue LED

Red

LED

Status ON, working normal

OFF

Status ON, low power (LVD)

Status ON, over voltage (OVP)

OFF

Status OFF (or faulty PCB/LED)

OFF

* Blue LED flickers on data access

NOTE: If the red LED is blinking and not ON permanently, there is no problem with your unit. This only

indicates the spin up of your drive or a temporary spike or slump in the power consumption and does not

harm your drive or device at all. The product can be used normally.

WiebeTech LLC

F i r e 8 0 0 U s e r M a n u a l - 4 -

System Requirements

PC Requirements

• Minimum Intel Processor II 350MHz, 64MB RAM

• USB 1.1 equipped PC; WinME, Win2000, WinXP

• USB 2.0 equipped PC; WinME, Win2000, WinXP

• 1394a equipped PC; Win98SE, WinME, Win2000, WinXP

• 1394b equipped PC; Win2000, WinXP

Mac Requirements

• Minimum Apple G3 processor (G4 for 1394b), 64MB RAM

• USB 1.1 equipped Mac; Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3

• USB 2.0 equipped Mac; Mac OS 10.2, 10.3

• 1394a equipped Mac; Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3

• 1394b equipped Mac; Mac OS 10.2, 10.3

NOTE: Mac OS 8.6 users should use USB extension 1.41 or FireWire extension 2.6 and later, to be able

to use USB 1.1 or 1394a.

Package Contents

• Fire800

• External Power Adapter; Input 100-240V, Output 12V/3A

• Power Cord

• Interface Cable

• Stand

• Tool for Front Panel removal

• Driver CD (single USB 2.0 and 1394a/USB2.0 Fire800 only)

Chapter 2 - Installing the HDD

Preparing the Enclosure

If your unit does not come with a drive already installed, remove the stand. Use the provided tool, place it

on the marked spot (hole) and press gently to remove the front panel. Slide the top cover and side panels

to the front to open up the case.

WiebeTech LLC

F i r e 8 0 0 U s e r M a n u a l - 5 -

Hard Drive Assembly

Connect the ATA cable and the power line to your hard drive. Install the hard drive and fasten the screws.

Align the top cover with the body and fasten the screws, before you insert the side panels and top cover.

Align the front panel with the enclosure and press gently on both ends. Connect your power adapter and

interface cable.

NOTE: The hard drive jumper settings should be master or factory default. Also, be careful not to damage

any cables or components and double check the connection between the cables, the bridge board and

your hard drive before you close up the case.

Chapter 3 - System Set Up

Connection to your Computer

A few tips on how to connect your external storage enclosure:

• Make sure your PCI Host Card is installed correctly

• Double check that the Host Card driver is up to date

• If required, update your Operating System or BIOS

• Only one interface at the time can be used

• Only one computer at the time can access the drive

• To use one drive on several computers, it can be shared through one computer on the network (1394

network, company network)

• FireWire can be daisy chained

• All devices in a daisy chain have to be switched on to permit the hub/daisy chain function

• Do not cover the Enclosure and leave enough room around it for the drive to cool down

• Do not expose the product to water or humid conditions

• If possible, arrange the cables so they do not cross each other

• Always check for visible damage and defects of power and interface cables before using it

• We recommend using the cables and adapter supplied with your product

NOTE: If you buy a spare power adapter for your working place or at home, make sure the output and

polarity is identical with the power adapter supplied!

Installation on a PC (Microsoft Windows)

Win2000 or WinXP with a USB or FireWire connection:

• Turn on your Computer and start Windows

• Connect the Fire800 and turn it on

• Let Windows search and install the driver automatically

• Open “My Computer” to see your external hard drive **

WiebeTech LLC

F i r e 8 0 0 U s e r M a n u a l - 6 -

Win98SE with a FireWire connection:

• Turn on your Computer and start Windows

• Connect the Fire800 and turn it on

• Let Windows search and install the driver automatically

• Open “My Computer” to see your external hard drive **

Win98/SE with a USB connection:

• Turn on your Computer and start Windows

• Insert the driver CD into your CD-ROM

• Connect the Fire800 and turn it on (in some cases the driver must be installed before connecting the

device, see note on CD or readme file)

• Follow the onscreen instructions and install the drivers

• Open “My Computer” to see your external hard drive **

Unplug Procedure:

• Click on the taskbar icon for external hardware

• Choose your external hard drive and confirm to remove it

** For factory new drives and formatting, see “Partitioning & Formatting”

NOTE: If the system doesn’t recognize the drive, turn on the power first, before connecting the

USB/FireWire cable. Win98 does not support FireWire, you need to upgrade your OS to Win98SE or

higher. The Fire800 does not support Win98/SE, you need to upgrade your OS to WinME or higher.

For safe removal of your drive and to assure that no data is lost, always follow the unplug procedure. If

not, an error message will show up.

Installation on a Macintosh (Apple Mac OS)

Mac OS 9.x or Mac OS 10.x with a FireWire or USB connection:

• Turn on your computer and start Mac OS

• Connect the Fire800 and turn it on

• No driver installation required

• The external drive will mount and show up on your desktop**

Mac OS 10.2 or 10.3 with a FireWire 800 or USB 2.0 connection:

• Turn on your computer and start Mac OS

• Connect the Fire800 and turn it on

• No driver installation required

• The external drive will mount and show up on your desktop**

Unplug Procedure:

• Drag the external hard drive icon into the trash bin

• Turn off your device

** For factory new drives and formatting, see “Partitioning & Formatting”

NOTE: If the system doesn’t recognize the drive, turn on the power first, before connecting the

USB/FireWire cable. For Mac OS 8.6, the USB extension has to be at least v1.41. For Mac OS 8.6, the

FireWire extension has to be at least v2.6. For save removal of your drive and to assure that no data is

lost, always follow the unplug procedure. If not, an error message will show up.

Mac Screen

WiebeTech LLC

F i r e 8 0 0 U s e r M a n u a l - 7 -

Partitioning & Formatting

Be aware that this will destroy all your existing data on the drive, so make sure you have a backup! This

step is usually only required the first time you install a factory new hard drive, if you change the format or

want to erase all data on your drive.

PC running Win98/SE or WinME:

MS-DOS command “fdisk” (press Enter to confirm)

• Type “fdisk” and press Enter

• Select ”Y” and press Enter

• Enter "5” to change the drive

• Select the drive you want to format

• Choose “1” and follow the onscreen instructions

NOTE: You can choose to create several

partitions but be aware that if you want to

change this at a later point, it’s required to

format the drive again or use 3rd party

software. Win98/SE and WinME do not

recognize NTFS formatted drives, so if

you want to use your drive on those

platforms, we recommend you to use

FAT32 instead. If you use this device to

backup your data using a 3rd party

software running MS-DOS, we

recommend you to format the drive using

FAT32.

PC running Win2000 or WinXP:

Disk Management Program

• Right click on “My Computer” and choose “Manage”

• Select “Disk Management”

• Choose the drive you want to format and right click on it for further commands (Choose New Partition)

• Follow the Partition Wizard

NOTE: Mac OS does not

recognize NTFS formatted

drives, to use your device on

both platforms, we

recommend you using

FAT32. If you use Win2000

or WinXP and FAT32, the

biggest single partition you

can create will be 32GB. To

create larger partitions, you

need to use the DOS

command under Win98SE or

WinME or change to NTFS

format. If you can not see the

drive, make sure the jumper

settings of your hard drive

are correct, the drivers are

installed and the power is

turned on!

WiebeTech LLC

F i r e 8 0 0 U s e r M a n u a l - 8 -

Mac OS:

Mac OS9.2 and earlier, does not support creating partitions on an external drive. To do that, you would

need to purchase additional 3rd party software. Initializing is no problem on all Operating Systems.

For Mac OS X, use the Disk Utility to format and create partitions on your external disk.

• Select “Disk Utilities” in the utilities folder

• Choose your external drive and format it according to your requirement

NOTE: If you want to use

your drive on a PC running

Microsoft Windows as well

as on your Mac, we

recommend you to use a PC

to format the drive. Choose

FAT32 when formatting and

do not change anything on

the partition or format on

your Mac, otherwise the PC

will not be able to recognize

the drive anymore.

If you can not see the drive,

make sure the jumper

settings of your hard drive

are correct, there are no

extension conflicts and the

power is turned on!

Technical Questions:

For RMA and other questions, please see our online support area!

About this Manual:

This manual covers all interfaces and combinations for the Fire800 Enclosure. Images and descriptions

might therefore slightly vary between this manual and the actual product you have.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels WiebeTech Stockage

WiebeTech

WiebeTech G5JE Manuel utilisateur

WiebeTech

WiebeTech RTX220-QJp Manuel utilisateur

WiebeTech

WiebeTech SDGB Manuel utilisateur

WiebeTech

WiebeTech FCD-BP Manuel utilisateur

WiebeTech

WiebeTech FWDD Manuel utilisateur

WiebeTech

WiebeTech TDKES2 Manuel utilisateur

WiebeTech

WiebeTech ProSATA SS8 Manuel utilisateur

WiebeTech

WiebeTech RTX400-IR Manuel utilisateur

WiebeTech

WiebeTech MGB Manuel utilisateur

WiebeTech

WiebeTech ToughTech mini Manuel utilisateur

WiebeTech

WiebeTech RTX400-UR Manuel utilisateur

WiebeTech

WiebeTech CGB Manuel utilisateur

WiebeTech

WiebeTech RTX400H-QJ Manuel utilisateur

WiebeTech

WiebeTech RTX400-NJ Manuel utilisateur

WiebeTech

WiebeTech Forensic UltraDock FUDv6 Manuel utilisateur

WiebeTech

WiebeTech BayDock 800 Manuel

WiebeTech

WiebeTech RT5E Instructions d'installation et d'utilisation

WiebeTech

WiebeTech FOD Manuel utilisateur

WiebeTech

WiebeTech NVMe WriteBlocker Manuel utilisateur

WiebeTech

WiebeTech RTX400-SV Manuel utilisateur

WiebeTech

WiebeTech DBD4 Manuel utilisateur

WiebeTech

WiebeTech SIS4-SJ Manuel utilisateur

WiebeTech

WiebeTech RTX400-QR Manuel utilisateur

WiebeTech

WiebeTech SIS2-FH Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur