Weider PRO 9930 Manuel utilisateur

USER’S MANUAL

Model No. WESY99300

Serial No.

The serial number is found in the

location shown below. Write the

serial number in the space above.

CAUTION

Read all precautio s a d i struc-

tio s i this ma ual before usi g

this equipme t. Save this ma u-

al for future refere ce.

Serial

Number

Decal

www.weiderfit ess.com

Visit our website at

QUESTIONS?

We are committed to providi g

complete customer satisfactio .

If you have questio s, or if there

are missi g parts, we will guar-

a tee complete satisfactio

through direct assista ce from

our factory.

TO AVOID UNNECESSARY

DELAYS, PLEASE CALL DIRECT

TO OUR TOLL-FREE CUS-

TOMER HOT LINE. The trai ed

tech icia s o our customer hot

li e will provide immediate

assista ce, free of charge.

CUSTOMER HOT LINE:

1-888-936-4266

Mo .–Fri., 8 a.m.–6:30 p.m. EST

(excludi g holidays)

LIMITED W RR NTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORT NT PREC UTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

C BLE DI GR MS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

DJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

TROUBLE-SHOOTING ND M INTEN NCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

WEIGHT RESIST NCE CH RT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

ORDERING REPL CEMENT P RTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Note: P RT LIST/EXPLODED DR WING and a P RT IDENTIFIC TION CH RT are attached in the center of

this manual. Remove the P RT LIST/EXPLODED DR WING and the P RT IDENTIFIC TION CH RT before

beginning assembly.

TABLE OF CONTENTS

WEIDER is a registered trademark of ICON Health & Fitness, Inc.

ICON OF/DU C N D INC., (ICON), warrants this product to be free from defects in workmanship and mate-

rial, under normal use and service conditions, for a period of one (1) year days from the date of purchase.

This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to

replacing or repairing, at ICON's option, the product at one of its authorized service centers. ll products for

which warranty claim is made must be received by ICON at one of its authorized service centers with all

freight and other transportation charges prepaid, accompanied by sufficient proof of purchase. ll returns

must be pre-authorized by ICON. This warranty does not extend to any product or damage to a product

caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not pro-

vided by an ICON authorized service center, to products used for commercial or rental purposes, or to prod-

ucts used as store display models. No other warranty beyond that specifically set forth above is authorized

by ICON.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connec-

tion with the use or performance of the product or damages with respect to any economic loss, loss of prop-

erty, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequen-

tial damages of whatsoever nature. Some provinces do not allow the exclusion or limitation of incidental or

consequential damages. ccordingly, the above limitation may not apply to you. The warranty extended here-

under is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a

particular purpose is limited in its scope and duration to the terms set forth herein. Some provinces do not

allow limitations on how long an implied warranty lasts. ccordingly, the above limitation may not apply to

you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-

chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.

This warranty gives you specific legal rights. You may also have other rights which vary from province to

province or so specified by the retailer of your equipment.

ICON OF/DU CANADA, 900 de l’I dustrie, St-Jérôme, QC J7Y 4B8

LIMITED WARRANTY

IMPORTANT PRECAUTIONS

WARNING:To reduce the risk of serious i jury, read the followi g importa t precau-

tio s before usi g the weight system.

1. Read all i structio s i this ma ual a d i

the accompa yi g literature before usi g the

weight system.

2. It is the respo sibility of the ow er to e sure

that all users of the weight system are ade-

quately i formed of all precautio s.

3. The weight system is i te ded for home use

o ly. Do ot use the weight system i a com-

mercial, re tal, or i stitutio al setti g.

4. Use the weight system o ly o a level sur-

face. Cover the floor or carpet be eath the

weight system to protect the floor or carpet.

5. Regularly i spect a d tighte all parts.

Replace a y wor parts immediately.

6. Make sure that the cables remai o the pul-

leys at all times. If the cables bi d while you

are exercisi g, stop immediately a d make

sure that the cables are o all of the pulleys.

7. Keep childre u der the age of 12 a d pets

away from the weight system at all times.

8. Always wear athletic shoes for foot protec-

tio while exercisi g.

9. Keep ha ds a d feet away from movi g parts.

10. Always sta d o the foot plate whe perform-

i g a exercise that could cause the weight

system to tip.

11. If you feel pai or dizzi ess while exercisi g,

stop immediately a d begi cooli g dow .

12. Never release the press arm, butterfly arms,

leg lever, lat bar, or ylo strap while weights

are raised. The weights will fall with great

force.

13. Always disconnect the lat bar or nylon strap

from the weight system when performing an

exercise that does not use the attachments.

14. The war i g decals show below have bee

attached to the weight system i the loca-

tio s show . If a decal is missi g or illegible,

please call our Customer Service Departme t

at the umber o the fro t cover of this ma -

ual to order a free replaceme t decal. Apply

the ew decal i the appropriate locatio .

WARNING:Before begi i g this or a y exercise program, co sult your physicia . This

is especially importa t for perso s over the age of 35 or perso s with pre-existi g health problems.

Read all i structio s before usi g. ICON assumes o respo sibility for perso al i jury or property

damage sustai ed by or through the use of this product.

SSEMBLED

DIMENSIONS:

Height: 198 cm

Width: 165 cm

Depth: 86 cm

Low Pulley

Station

Foot Plate

Press rm

Backrest

Curl Pad

djustment

Knob

Butterfly

rms

Weight

Stack

Leg Press

Lever

Thank you for selecting the innovative and versatile

WEIDER®PRO 9930 weight system. The WEIDER®

PRO 9930 offers a unique selection of weight stations

designed to develop every major muscle group of the

body. Whether your goal is to tone your body, build

dramatic muscle size and strength, or improve your

cardiovascular system, the WEIDER®PRO 9930 will

help you to achieve the results you want.

For your be efit, read this ma ual carefully before

usi g the weight system. If you have additional

questions, please contact our Customer Service

Department toll-free at 1-888-936-4266, Mon.–Fri., 8

a.m.–6:30 p.m. EST (excluding holidays). To help us

assist you, please note the product model number and

serial number before calling. The model number is

WESY99300. The serial number can be found on a

decal attached to the weight system (see the front

cover of this manual).

Please use the drawi g below to familiarise your-

self with the major parts of the weight system.

BEFORE YOU BEGIN

Backrest

Seat

High Pulley

Station

Lat Bar

ASSEMBLY

Make sure you have the followi g tools:

• Two adjustable wrenches

• One standard screwdriver

• One phillips screwdriver

• One rubber mallet

• You will also need grease or petroleum jelly, a

small amount of soapy water, and clear tape or

masking tape.

Note: ssembly will be more convenient if you have

a socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

How to Ide tify Parts

To help you identify the small parts used in assembly,

we have included a P RT IDENTIFIC TION CH RT

in the center of this manual. Place the chart on the

floor and use it to easily identify parts during each

assembly step. Note: Some small parts may have

bee pre-attached. If a part is ot i the parts

bag, check to see if it has bee pre-attached.

How to Orie t Parts

s you assemble the weight system, make sure that

all parts are oriented exactly as shown in the draw-

ings.

Tighte i g Parts

Tighten all parts as you assemble them, unless

instructed to do otherwise.

Questio s?

If you have questions after reading the assembly

instructions, please call our Customer Service

Department at 1-888-936-4266.

Assembly Requires Two Perso s

For your convenience and safety, assemble the

weight system with the help of another person.

Set Aside E ough Time

Due to the many features of the weight system, the

assembly process will require about six hours. By

setting aside plenty of time and by deciding to

make the task enjoyable, assembly will go smoothly.

You may want to assemble the weight system over

a couple of evenings.

Select a Locatio for the Weight System

Because of its weight and size, the weight system

should be assembled in the location where it will be

used. Make sure that there is enough room to walk

around the weight system as you assemble it.

How to U pack the Box

To make assembly as easy as possible, we have

divided the assembly process into four stages. The

parts needed for each stage are found in individual

bags. Importa t: Wait u til you begi each stage

to ope the parts bag for that stage. Place all

parts of the weight system in a cleared area and

remove the packing materials. Do not dispose of

the packing materials until assembly is completed.

Make Assembly Easier for Yourself

Everything in this manual is designed to

ensure that the weight system can be assem-

bled successfully by anyone. Before begi -

i g assembly, make sure to read the

i formatio o this page. This brief i tro-

ductio will save you much more time tha

it takes to read it.

The Four Stages of the Assembly Process

Frame Assembly—You will begin by assembling

the base and the uprights that form the skeleton of

the weight system.

Arm Assembly—During this stage you will

assemble the arms and the leg lever.

Cable Assembly—During this stage you will

attach the cables and pulleys that connect the

arms to the weights.

Seat Assembly—During the final stage you will

assemble the seats and the backrests.

1. Before begi i g, make sure that you have read

a d u derstood the i formatio o page 5.

Locate a d ope the parts bag labelled “FRAME

ASSEMBLY.”

Press a 2” Square Inner Cap (38) into the Butterfly

Base (61). Press two 2” Square Inner Caps into the

Press Base (60).

Insert four 5/16” x 2 1/2” Carriage Bolts (1) up

through the indicated holes in the Butterfly Base (61)

and the Press Base (60). Note: If the Bolts fall out,

secure them by putti g a small piece of tape over

the head of each Bolt. Place the Butterfly Base and

the Press Base flat on the floor.

ttach the Press Base (60) to the Butterfly Base (61)

with two 5/16” x 2 3/4” Bolts (20), two 5/16” Flat

Washers (19), and two 5/16” Nylon Locknuts (2).

2. Position the Butterfly Upright (62) as shown. Place

the bracket on the lower end of the Butterfly Upright

over the indicated 5/16” x 2 1/2” Carriage Bolts (1) in

the Butterfly Base (61). Hand tighten two 5/16” Nylon

Locknuts (2) onto the Bolts. Do ot tighte the

Nylo Lock uts yet.

Place the bracket on the lower end of the Press

Frame Upright (59) over the indicated 5/16” x 2 1/2”

Carriage Bolts (1) in the Press Base (60). Hand tight-

en two 5/16” Nylon Locknuts (2) onto the Bolts. Do

ot tighte the Nylo Lock uts yet.

Frame Assembly 1

19 20

Position

with the

bracket

on this

side

3. Place two Weight Bumpers (84) over the indicated

holes in the Butterfly Base (61). Slide the Weight

Guides (58) into the indicated holes.

ttach the Weight Guides (58) to the Butterfly Base

(61) with two 3/8” x 2 1/2” Bolts (6), four 3/8” Flat

Washers (17), and two 3/8” Jam Nuts (18).

Slide the eight Weights (8) onto the Weight Guides

(58). Make sure that the Weights are tur ed so the

pi grooves are o the bottoms of the Weights.

4. Press a Weight Tube Bumper (76) into the lower end

of the Weight Tube (77). Slide the Weight Tube into

the center hole in the Weights (8).

Lubricate the holes in the Top Weight (78). Slide the

Top Weight onto the Weight Guides (58).

5. Press two 2” Square Inner Caps (38) into the Butterfly

Top Frame (64). Press two 1” Round Inner Caps (41)

into the top of the Butterfly Top Frame.

ttach the Butterfly Top Frame (64) to the Press Top

Frame (63) with two 5/16” x 2 3/4” Bolts (20), two

5/16” Flat Washers (19), and two 5/16” Nylon

Locknuts (2).

Press a 2” Square Inner Cap (38) into the Press Top

Frame (63).

1884

Lubricate

Grooves

7. Turn the Seat Brace (75) so the nut is on the side

shown. ttach the Seat Brace to the Butterfly Base

(61) with the indicated 5/16” x 2 1/2” Carriage Bolts

(1) and two 5/16” Nylon Locknuts (2). Do ot tighte

the Nylo Lock uts yet.

6. ttach the Butterfly Top Frame (64) and the Press

Top Frame (63) to the indicated brackets on the

Uprights (59, 62) with four 5/16” x 2 3/4” Bolts (20),

two Top Plates (46), and four 5/16” Nylon Locknuts

(2). Note: Before attachi g the Top Frames to the

Uprights, make sure that both Weight Guides (58)

are i side of the i dicated holes. Do ot tighte

the Nylo Lock uts yet.

Secure the Weight Guides (58) to the Butterfly Top

Frame (64) with two 3/8” x 2 1/2” Bolts (6), four 3/8”

Flat Washers (17), and two 3/8” Jam Nuts (18).

8. Hold the Seat Bar (74) between the Seat Brace (75)

and the Butterfly Upright (62) so that the hole that is

closest to a welded plate is toward the Seat Brace.

ttach the Seat Bar to the Seat Brace with two 5/16”

x 2 3/4” Bolts (20), two 5/16” Flat Washers (19), and

two 5/16” Nylon Locknuts (2). Do ot tighte the

Nylo Lock uts yet. Note: Be careful ot to over-

tighte the Nylo Lock uts, or the curl post

attached i step 38 will ot slide freely.

ttach the Seat Bar (74) to the Butterfly Upright (62)

with two 5/16” x 2 3/4” Bolts (20), two 5/16” Flat

Washers (19), and two 5/16” Nylon Locknuts (2).

Tighte all ylo lock uts used i steps 1

through 8.

17 17

161

Nut

46 46

17 17

Holes

62 19

74 Hole

220

11. Press a 1 1/2” Square Inner Cap (79) into the Press

Seat Frame (52).

Slide the bracket on the lower end of the Press Seat

Frame (52) onto the indicated 5/16” x 2 1/2” Carriage

Bolts (1) in the Press Base (60). Tighten two 5/16”

Nylon Locknuts (2) onto the Bolts.

ttach the Press Seat Frame (52) to the Press Frame

Upright (59) with two 5/16” x 2 3/4” Bolts (20), two

5/16” Flat Washers (19), and two 5/16” Nylon

Locknuts (2).

9. Locate a d ope the parts bag labelled “ARM

ASSEMBLY.”

Press a 1” x 7/8” Plastic Bushing (29) onto each weld-

ed spacer on the Press Frame (53). Slide the Press

Frame onto the Press Base (60). (See the inset draw-

ing for proper orientation.) Note: The Plastic

Bushi gs should fit o to the e ds of the tube i

the Press Base. This will be a tight fit.

Lubricate the 3/8” x 8” Bolt (30). ttach the Press

Frame (53) to the Press Base (60) with the Bolt and a

3/8” Nylon Locknut (4). Do ot overtighte the Nylo

Lock ut; the Press Frame must pivot easily.

10. Press a 1 3/4” Square Inner Cap (37) into the top of a

Press rm (54). Press a 1” Inner Cap (80) into the

indicated hole in the Press rm.

ttach the Press rm (54) to the bracket on the Press

Frame (53) with two 5/16” x 2 1/2” Bolts (3) and two

5/16” Nylon Locknuts (2).

Repeat this step to assemble the second Press rm

(54).

Arm Assembly

19 22

30 Lubricate

Tube

14. Ope the parts bag labelled “CABLE ASSEMBLY

AND PULLEYS.” For cable ide tificatio a d routi g

duri g steps 14–32, refer to the CABLE DIAGRAMS

a d CABLE ID CHART o pages 19 a d 20.

Insert two 3/8” x 1” Bolts (15) into the welded brackets

on the Left and Right Butterfly rms (67, 68). Secure

each Bolt with a 3/8” Jam Nut (18).

Ide tify the Short Cable (71). It has a closed loop o

each e d. Slide one end of the Cable onto each of the

3/8” x 1” Bolts (15). Secure the Cable to the Bolts with

3/8” Jam Nuts (18). Do ot overtighte the Jam Nuts.

Remove both 3 1/2” Pulleys (5) from the pre-assembled

djustable Pulley Plates (44). Wrap the Short Cable (71)

around a Pulley in the direction shown. ttach the Pulley

and a Cable Trap (39) to the top hole in the two

djustable Pulley Plates with a 3/8” x 2” Bolt (35) and a

3/8” Nylon Locknut (4). Make sure that the Cable Trap

a d the Pulley Plates are orie ted as show .

12. Press two 1 1/2” Square Inner Caps (79) into the Leg

Lever (49). Insert a Bumper (33) between the brackets

on the Leg Lever. ttach the Bumper to the Leg Lever

with a #10 x 1” Screw (32).

Slide the bracket on the Leg Lever (49) onto the Press

Seat Frame (52). ttach the Leg Lever to the Press Seat

Frame with a 5/16” x 2 1/4” Bolt (81) and a 5/16” Jam

Nut (90). Do ot overtighte the Jam Nut. The Leg

Lever must pivot easily.

ttach a 3/8” x 2 1/2” Eyebolt (83) to the Leg Lever (49)

with a 3/8” Flat Washer (17) and 3/8” Nylon Locknut (4).

13. Press a 1 3/4” Square Inner Cap (37) into each end of

the Right Butterfly rm (68). Wet the lower end of the

rm with soapy water. Slide a 10” Pad (65) onto the

lower end of the rm.

Lubricate the indicated axle on the Butterfly Top Frame

(64). Have a second person slide the Right Butterfly rm

(68) onto the axle, as shown. Refer to the i set draw-

i g. Place two 1” Retai ers (25), with the teeth dow -

ward, o top of a i verted 1” Rou d Cap (26). Usi g

a hammer, tap the 1” Rou d Cap a d the Retai ers

o to the axle to secure the Right Butterfly Arm.

Repeat this step to assemble the Left Butterfly rm (67).

Cable Assembly

68 67

Lubricate

25 37

Teeth

Autres manuels pour PRO 9930

Table des matières

Autres manuels Weider Salle de sport à domicile

Weider

Weider Pro 315 Bench Manuel utilisateur

Weider

Weider Master12 Position Bench Manuel utilisateur

Weider

Weider Body Works Pro 2.0 Bench Manuel d'utilisation et d'entretien

Weider

Weider 190 Tc Bench Manuel du système

Weider

Weider 195 Tc Bench Guide de configuration

Weider

Weider 4990 I Manuel du système

Weider

Weider Pro 290 W Bench Manuel utilisateur

Weider

Weider WEBE37330 Manuel utilisateur

Weider

Weider 831.153921 Manuel utilisateur

Weider

Weider Clubsepper SM10E Manuel utilisateur

Weider

Weider 831.159360 Manuel utilisateur

Weider

Weider Victory SM11 Manuel utilisateur

Weider

Weider Flex 8960 Guide de l'utilisateur

Weider

Weider PowerGym 15601 Manuel utilisateur

Weider

Weider Pro 340 L Bench Manuel utilisateur

Weider

Weider Platinum Xp 800 Manuel utilisateur

Weider

Weider WEBE07790 Manuel utilisateur

Weider

Weider FLEX-CTS WESY20318.0 Manuel utilisateur

Weider

Weider PRO 4250 Manuel utilisateur

Weider

Weider 350 Bench Manuel utilisateur

Weider

Weider Precision 200 Manuel utilisateur

Weider

Weider Muscle 129 Manuel utilisateur

Weider

Weider 184 Bench Manuel d'utilisation et d'entretien

Weider

Weider 2uprtw/leg Curlcobra Bench Manuel utilisateur

Manuels Salle de sport à domicile populaires d'autres marques

Horizon Fitness

Horizon Fitness OXFORD 6 Manuel utilisateur

Energetics

Energetics Multi Trainer 5.1 Manuel utilisateur

Matrix

Matrix MG-PL Series Manuel utilisateur

Reebok

Reebok Tbr2i Manuel d'utilisation et d'entretien

Pure Fitness

Pure Fitness 8526HE Manuel utilisateur

Bowflex

Bowflex Sport 001-6961 Manuel utilisateur

NordicTrack

NordicTrack E8200 Competition Bench Guide de démarrage rapide

Body Solid

Body Solid GHYP-345 Manuel utilisateur

Evo

Evo TAHOE 5105 Manuel utilisateur

cardiobull

cardiobull RA17 Manuel utilisateur

ParaBody

ParaBody 40 Manuel utilisateur

JLL

JLL Ventus Pro Air Power Manuel utilisateur

Trojan

Trojan Colorado 370 Manuel utilisateur

Octane Fitness

Octane Fitness xRide xR650 Manuel utilisateur

Precor

Precor Discovery Series Manuel utilisateur

Insportline

Insportline RW600 Manuel utilisateur

Stamina

Stamina 55-1532 Manuel utilisateur

Tunturi

Tunturi R25 Manuel utilisateur