Waveshare SIM7600 Series Manuel utilisateur

SIM7600X 4G DONGLE

Introduction

SIM7600X 4G DONGLE is an industrial-grade 4G dongle, which features up to 150Mbps

downlink rate and 50Mbps uplink rate, supports operating systems including

Windows/Linux/Android. By simply connecting it to a laptop, PC, Raspberry Pi, drone,

industrial computer, or other IoT host device, it is easy to use a 4G network connection on

the go.

Features

Supports 2G/3G/4G network connection

Driver provided, for operating systems including Windows/Linux/Android

Supports TCP/UDP/FTP/FTPS HTTP/HTTPS protocols

Supports network protocols such as

TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS

Onboard USB port, for directly connecting with ARM/X86 hosts or other industrial

computers

Onboard UART port with hardware flow control, for connecting with host boards

like Arduino/STM32

Nano SIM card slot; supports 1.8V / 3V nano-SIM card

3x LED indicators, easy to monitor the working status

Portable customized enclosure, mini size, nice looking

Baudrate support: 300bps ~ 4Mbps (115200bps by default)

Baudrate auto-negotiation: 9600bps ~ 115200bps

Hardware Connection

Prepare：

SIM7600X 4G DONGLE

A 4G Nano SIM card（The card should be workable and 4G accessible）

Assemble the 4G antenna;

Open the SIM card buckle, pull the SIM card slot according to the arrow as below;

Plug the 4G SIM card and LOCK the SIM card slot according to the arrow, then

close the buckle.

Connect the USB port of the DONGLE to your PC. Raspberry Pi or other devices

If you want to use GPS, please make sure that the DONGLE you bought is the

SIM7600G-H version. You should set the receiver on the outside for GPS testing.

4G Connecting

Networking in Windows PC

1. Hardware Connection

2、Driver Installation

Download the driver：SIM7600X Driver

Connect the DONGLE to Windows PC (Hereafter we use Windows 10 PC as example)）

Open Device Manager—>Other Devices—>“SimTech, Incorporated”—>Update

driver—>Browse my compute for driver software—>Choose the driver according to your

OS—>Install it

After installation, all the devices should be recognized normally as below:

3、Dailing up

Connect the 4G DONGLE to Windows 10 PC ，install drivers as the guide

above.Then most of the PC will auto-connect to 4G network.

If your PC cannot auto-connect, you can try with PPPoE method:

In theory, the uplink speed of 4G network is up to 150Mbps and the downlink speed is up

to 50Mpbs.

However, the actual speed is influenced by the Network coverage rate, time, network

situation and the base station, etc.

Therefore, the actual speed of the 4G network will be slower than the expected data. In

this case, you can change the area test it again or try it at other times.

Setup 4G Connection for Raspberry Pi (Raspbian)

1、Hardware connection

2、Setting

The driver of SIM7600X has been pre-installed in Raspberry Pi OS (Raspbian), you need to

install it again. You can following the following guide to set up 4G network connection.

There are three ways:

Raspberry Pi networked via RNDIS ——（Simplest）

SIM868 PPP Dail-up Networking ——（Simple）

Setup wwan0 interface for 4G network （Related code）——（Complicated）

Set up Network for Jetson Nano

1、Hardware connection

2、Setting

Please connect all the hardware and start Jetson Nano.

Check and make sure that the module work normally by demo codes above.

Open minicom by command

sudo minicom -D /dev/ttyUSB2

Type the following command to check

AT+CNMP=38

AT+CSQ

AT+CREG?

AT+COPS?

AT+CPSI?

Download driver

wget https://www.waveshare.com/w/upload/4/46/Simcom_wwan.zip

tar zxvf Simcom_wwan.zip

cd Simcom_wwan

sudo make

Use root permission to install driver

sudo su

insmod simcom_wwan.ko

lsmod

dmesg

Check if the wwan0 interface is recognized

ifconfig -a

Enable the wwan0 interface

ifconfig wwan0 up

Dailing by minicom

minicom -D /dev/ttyUSB2

AT$QCRMCALL=1,1

Allocate IP

apt-get install udhcpc

udhcpc -i wwan0

Now you can use 4G network

If you get dns error, please fix it by this command

route add -net 0.0.0.0 wwan0

GNSS

GPS Positing

1、Hardware connection

Note：SIM7600CE-CNSE 4G DONGLE doesn't feature GPS function. If you want to

use GPS, please purchase SIM7600G-H 4G DONGLE and GPS antenna separately.

Remove the case, assemble the GPS antenna and replace it and close.

When testing,You should set the receiver of GPS antenna in outside and please

test it in sunny day., Power on and waiting for several minuts to get the postion;

2、AT Commands for GPS

Commands and test result：

AT+CGPS=1 //Open GPS

AT+CGPSINFO //Print GPS information to serial port

AT+CGPS=0 //Close GPS

3、Obtain GPS data by software

Send SMS

1. Assemble SIM card, LTE antenna。Connect DONGLE to PC and power on it;

2. Check if the indicators work normally, PWR keep lighting and NET is blinking;

3. Set local SMS center: AT+CSCA="+8613800755500"+ ENTER，It will response OK。

Note: the number of SMS center is different among different areas, please confirm

your local SMS center and modify it;

4. AT+CMGS="phone number"<ENTEER>, Set the target phone number, it will

response:“>”, input the content and send, for example:“Send massage test!”, Add

1A in hex in the end of the content to confirm the SMS content and send it without

ENTER (You can also send 1B in hex to cancel the sending), Module response

+CMGS：15 if SNS is sent properly

Receive Message

1. Send a message from phone to the SIM7600 DONGLE: “This is a receive test for

SIM7600X！”

2. The serial port will print data when receiving, for example: “SM”，20，it means

that there are 20 messages in SM and the last message received is the 20th

message.

3. Read message：AT+CMGR=20 Read the 20th message 读（AT+CMGL="ALL" to read

all messages）

4. Delete message：AT+CMGD=20

5. Convert the message to string by convertor.。

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Waveshare Matériel informatique

Waveshare

Waveshare WM8960 Manuel utilisateur

Waveshare

Waveshare DVK512 Manuel utilisateur

Waveshare

Waveshare XNUCLEO-F030R8 Manuel utilisateur

Waveshare

Waveshare Music Shield Manuel utilisateur

Waveshare

Waveshare E9 Manuel utilisateur

Waveshare

Waveshare Accessory Shield Manuel utilisateur

Waveshare

Waveshare Pico-BLE Manuel utilisateur

Waveshare

Waveshare DVK512 Manuel utilisateur

Waveshare

Waveshare High-Precision AD/DA Board Manuel utilisateur

Waveshare

Waveshare XNUCLEO-F030R8 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur