TEE NUT FROM TURNING (USE A 3/16 HEX NUT WRENCH – NOT
INCLUDED)
-AT TIMES THE BOLT MAY BE LONGER THAN YOU NEED TO
SECURITY THE DOOR FRAME, IT SO, YOU CAN SHORTEN THE
BOLT BY CUTTING IT TO THE DESIRED LENGTH. ANOTHER
OPTION WOULD BE TO INTALL WASHERS BEHIND THE BOLT OR
TEE NUT TO SHORTEN THE LENGTH AS WELL, BUT MAY NOT
LOOK ASTHETICALLY PLEASING.
2) INSTALLATION ON TO A BLOCK WALL:
-USE PROVIDED TAMPER RESISTANT SCREWS & ANCHORS.
-YOU WILL ALSO NEED A 3/8” MASONARY DRILL BIT AND FLAT
HEAD SCREWDRIVER OR BIT (NOT INCLUDED).
3) INSTALLATION ON TO A WOOD CLAD:
-USE PROVIDED TAMPER RESISTANT SCREWS.
-YOU WILL ALSO NEED A 3/8” MASONARY DRILL BIT AND FLAT
HEAD SCREWDRIVER OR BIT (NOT INCLUDED).
-IT IS BEST TO PILOT THE SCREWS WITH A 3/32” WOOD OR
METAL DRILL BIT (NOT INCLUDED).
4) INSTALLATION ON TO A STUCCO CLAD SURFACE:
-USE PROVIDED TAMPER RESISTANT SCREWS & ANCHORs
-YOU WILL ALSO NEED A 3/8” MASONARY DRILL BIT AND FLAT
HEAD SCREWDRIVER OR BIT (NOT INCLUDED).
-----------------------------------------------------------------------------------
INSTALLATION OF YOUR NEW WATCHDOG SECURITY PET DOOR COVER
FOR THE BEST RESULTS, THE WATCHDOG SECURITY PET DOOR COVER
MUST FIT FLUSH TO THE WALL OVER THE EXISTING PET DOOR FRAME.
