Wasp WWS800 Manuel

Portal > Knowledgebase > Hardware > Scanners > WWS800/850 > WWS800 or WWS850 scanner setup instructions

WWS800 or WWS850 scanner setup instructions

Sicaro Burnett - 2017-07-14 - in WWS800/850

Notes & steps for getting the WWS800 or WWS850 to work with a Bluetooth base:

A. Look at the bottom of the base. If there are 2 barcode labels (1 with Set Connection and 1 serial number) this is the Bluetooth

base, and it is the easiest base to work with. There is another base which is charging only, and it does not have a Set Connection

barcode. If it's charging-only, a separate Bluetooth adapter (or built-in Bluetooth) will need to be used.

B. The base has an AC adapter that needs to be plugged in so the base is powered on, with red or blue LEDs lit up.

C. The data communication cable has an HD15 plug at one end that connects to the base. Usually the other end of that cable is

USB. If it's PS2 (round) or serial (9-pin trapezoid), a USB cable can be purchased from Wasp since it is by far the easiest to work

with.

Steps to pair a WWS800 or WWS850 scanner to its Bluetooth base station:

1. From the bottom of the base, scan the Set Connection barcode. If it beeps 3 times, go to Step 4.

Note: If you have trouble scanning this one, you can scan Set Connection from page 1 of the Reference Guide; these are identical.

2. Then scan the serial number barcode next to it.

3. Test the connection by opening Notepad, MS Word, or some other application that accepts text input from a keyboard, then

scan a barcode from the Test Symbols section of the manual, or a UPC barcode from a product. The application should show the

data from the barcode.

If it's not working, we need to set the scanner to defaults. If you don't have a hardcopy already, print a page from the Reference

Guide PDF. Usually this is PDF page 3, which will show pages 1 & 2 at the bottom of the printed page.

4. From page 2 at the bottom, scan the Enter Setup barcode.

5. From page 1 at the top, scan the Restore Default Settings barcode.

6. From page 1 at the bottom, scan the Update barcode.

7. Go back to step 1.

Scanner User Manuals, Programming Reference Guides, Quick Reference Guides, Quick Start Guides (multiple models)

How to set the WWS800 or WWS850 to factory default

Autres manuels pour WWS800

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Wasp Lecteur de codes-barres

Wasp

Wasp WDI4500 Manuel utilisateur

Wasp

Wasp WDI9600 Manuel utilisateur

Wasp

Wasp WWS550SBR Manuel utilisateur

Wasp

Wasp WWS500 Mode d'emploi

Wasp

Wasp WLP 4170 Mode d'emploi

Wasp

Wasp WPL308 Manuel utilisateur

Wasp

Wasp WWS750 Manuel utilisateur

Wasp

Wasp WLS9600 Manuel utilisateur

Wasp

Wasp WWS800 Manuel utilisateur

Wasp

Wasp WWS110i Manuel utilisateur

Wasp

Wasp WWS550i Manuel utilisateur

Wasp

Wasp WWS800 Manuel utilisateur

Wasp

Wasp WWS150i Manuel utilisateur

Wasp

Wasp WLS8600 Manuel utilisateur

Wasp

Wasp WWS650 Manuel utilisateur

Wasp

Wasp WDI4600 Manuel utilisateur

Wasp

Wasp WWS110i Manuel utilisateur

Wasp

Wasp CCD Scanner Mode d'emploi

Wasp

Wasp WLR8950 Manuel utilisateur

Wasp

Wasp N1181 Mode d'emploi

Wasp

Wasp Wasp WDI7500 Manuel utilisateur

Wasp

Wasp Wasp WDI7500 Manuel d'installation et d'exploitation

Wasp

Wasp WPL25 Manuel utilisateur

Wasp

Wasp WLR8950 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur