Waring WPB Manuel utilisateur
Models WPB, PBB, MBB
Professional food and
Beverage Blender series
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.
WPB PBB MBB
IMPORTANT UNPACKING INSTRUCTIONS
1. Place the gift box containing your Waring Pro®
Blender on a flat, sturdy surface before unpacking.
2. Open corrugated flap. Remove blender container
assembly, instruction booklet and other printed
materials from top of corrugated box. Please use
caution not to tip the container when removing.
CAUTION: Sharp blade inside blender jar.
3. Next, remove the top corrugated insert. Carefully lift
blender base from box and set aside.
4. Replace all corrugated inserts in the box and save
the box for repacking.
NOTE: for WPB Series blenders, follow instructions, How
to Assemble Containers with Removable Blades, page 5.
REPACKING INSTRUCTIONS
1. Place the unit on a large, sturdy flat surface.
2. Carefully place blender base in bottom of box.
3. Place corrugated insert over base.
4. Place blender container assembly over corrugated
insert and cover with corrugated flap.
5. Close box for shipping.
CONTENTS
Important Safeguards.............................2
Grounding Instructions............................3
Important Hot Blending Instructions .................4
Operating Instructions ............................4
How To Assemble Containers With Removable Blades ..5
How To Disassemble And Clean Containers With
Removable Blades ...............................6
How To Clean Containers With Nonremovable Blades ...6
How To Clean Unit Base ..........................7
Recipes........................................7
IMPORTANT: Always unplug the Waring Blender from
outlet when disassembling and assembling.
1
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. READ ALL INSTRUCTIONS.
2. To protect against risk of electrical shock, do not put
appliance in water or other liquid.
3. This appliance should not be used by or near children
or individuals with certain disabilities.
4. Unplug from outlet when not in use, before putting on
or taking off parts, and before cleaning.
5. Avoid contact with moving parts.
6. Do not operate the Waring Blender or any other
electrical appliances with a damaged cord or plug, or
after the unit malfunctions, or is dropped or damaged
in any manner. Return it to the nearest authorized
service facility for examination, repair, or adjustment.
7. The use of attachments, including canning jars, not
recommended or sold by Waring may cause fire,
electric shock, or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter,
or touch hot surfaces.
10. Keep hands and utensils out of jar while blending
to prevent the possibility of severe personal injury
and/or damage to the blender. A rubber spatula may
be used, but must be used only when the blender is
not running.
11. Blades are sharp. Handle carefully.
12. To avoid injury, never place blade assembly on the
base without container properly attached.
13. Always operate blender with cover in place.
2
14. When blending hot liquids, remove center piece
of two-piece cover. Begin processing with only one
cup (8 oz.). Always begin processing at the lowest
speed setting. Keep hands and other exposed skin
away from the lid opening to prevent possible burns.
See Hot Blending instructions, next page.
15. Screw on container bottom firmly. Injury can result if
moving blades accidentally become exposed.
16. Do not leave blender unattended while it is running.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
For your protection, Waring Blenders are equipped
with a 3-conductor cordset that has a molded 3-prong
grounding-type plug, and should be used in combination
with a properly connected grounding-type outlet as shown
in Figure A. If a grounding-type outlet is not available, an
adapter, shown in Figure B, may be obtained so that a
2-slot wall outlet can be used with a 3-prong plug.
Referring to Figure C, the adapter must be grounded by
attaching its grounding lug under the screw of the outlet
cover plate. CAUTION: Before using an adapter, it must
be determined that the outlet cover plate screw is properly
grounded. If in doubt, consult a licensed electrician. Never
use an adapter unless you are sure it is properly grounded.
Note: Use of an adapter is not permitted in Canada.
3
IMPORTANT: HOT BLENDING INSTRUCTIONS
To minimize possibility of scalding when blending hot
ingredients, the following precautions and procedures must
be observed:
1. Limit amount of material processed to one cup (8 oz.).
2. Completely remove the lid insert of the two-piece
container lid before starting motor. (This will allow
venting of the rapidly heated and expanding air
present inside container when blender is running.)
3. Start blending on low speed.
4. While blender is running, up to 11⁄2cups (12 oz.) of
additional liquid can be added. Pour liquid slowly
through the opening in the lid.
OPERATING INSTRUCTIONS
1. When placing the container on the unit base, make sure
that the unit is turned off and is at a complete stop. Do
not put the container on or take it off while the unit is
running. Doing so may damage the drive shaft or blade
assembly. For best results, do not fill container above
3-cup level.
2. Be sure the switch is in the off position and plug the
blender into a convenient outlet.
3. The Waring Blender is ideal for blending ice drinks.
A hint when mixing ice drinks: keep the blades in the
container covered with liquid, turn the unit on, remove
the lid insert on top of the jar lid, and feed the ice cubes
slowly into the jar. NOTE: Never use containers other
than Waring®Blender containers with your Waring unit.
4. Put ingredients into container, then put on cover.
Always add liquid ingredients first, unless otherwise
specified in recipe. Always hold container with one hand
while blending.
4
5. CAUTION: To avoid damage to your blender, do not run
the blender if the blades become blocked or jammed
during use. Turn the blender off immediately, remove
the container from the blender base and dislodge the
material that is blocking or jamming the blade.
HOW TO ASSEMBLE CONTAINERS WITH
REMOVABLE BLADES
1. Before starting, make sure that the blender cord is
unplugged and that the switch is in the off position.
2. Refer to Figure 1. The following
points are important to note when
putting together the container
assembly:
3. Container gasket must be
between the blade assembly
and the container.
4. Container collar must not be mis-
threaded onto the container.
5. Container collar must be securely
tightened onto the container
before placing food or liquid in
the container.
6. Tighten the container collar by holding the container
upside down and turning the container collar
counterclockwise.
7. Place container assembly on unit base so that it is
firmly seated and not tilted to one side. Never place the
container collar or the blade assembly on the unit base
unless the container has been completely assembled
and securely tightened.
5
Fig.1
HOW TO DISASSEMBLE & CLEAN
CONTAINERS WITH REMOVABLE BLADES
1. Be sure the switch is in the off position.
2. Remove the container assembly from the unit base and
empty the contents.
3. To disassemble the Waring Blender container assembly,
turn container collar clockwise.
4. The glass container, container collar and blade
assembly are dishwasher safe. The plastic container,
lid, measuring cup lid insert and gasket must be
washed by hand. Allow all parts to air dry, and
reassemble for next use.
5. When assembling container after cleaning, be certain
all components are in the proper position.
6. It is particularly important to place the container gasket
between the blade assembly and the container.
7. Wash and rinse container prior to initial use, and
immediately after each use.
HOW TO CLEAN CONTAINERS WITH
NONREMOVABLE BLADES
1. Remove the container from the unit base. Remove the
lid. Add a cup of cleaning solution, made by adding a
few drops of dishwashing detergent to 1 cup of cool
water, to the container. Scrub and flush out the interior
of the container and the lid to dislodge and remove as
much residue as possible. Empty the container.
2. Add more cleaning solution. Put lid on container, place
container on unit base, and run on high speed for
two minutes.
6
3. Empty the container and repeat as above, using clean
rinse water in place of cleaning solution. Empty, rinse
and dry, prior to storing unit.
4. Wash and rinse container prior to initial use, and
immediately after each use.
HOW TO CLEAN UNIT BASE
1. To clean the unit base, unplug the power cord.
Wipe the exterior surfaces with a soft cloth or sponge
dampened with cleaning solution. Rinse with clean
water. Do not immerse the base in cleaning solution
or water. Wipe the base with dry towel.
RECIPES
Shakes
Chocolate Malted Shake – 2 servings
½cup whole milk
1 tablespoon chocolate syrup
1 cup chocolate ice cream
3 tablespoons malt powder
1 teaspoon vanilla
Place ingredients in blender jar in order listed. Blend for
2 minutes on HI.
Nutritional information per serving:
Calories 335 (31% from fat) • carb. 51g • pro. 8g • fat 12g • sat. fat 7g
chol. 37mg • sod. 242mg • calc. 239mg • fiber 0g
Power Shake – 2 servings
½cup orange juice
1 ripe banana
1½ cups fresh or frozen strawberries
1 tablespoon sugar (optional)
6-8 ice cubes
7
Place ingredients in blender jar in order listed. Blend for
1-2 minutes on HI.
Nutritional information per serving (with sugar):
Calories 138 (5% from fat) • carb. 34g • pro. 2g • fat 1g • chol. 0mg
sod. 5mg • calc. 28mg • fiber 4g
SMOOTHIES
Strawberry Banana Smoothie – 2 servings
¾cup nonfat milk
1 cup strawberries, hulled, cut in half
½cup banana slices (½-inch slices)
1 tablespoon plain fat-free yogurt
10 ice cubes
Place ingredients in blender jar in order listed. Cover and
blend on LO for about 20 seconds, then on HI for another
40 seconds. Serve immediately.
Nutritional information per serving:
Calories 84 (6% from fat) • carb. 17g • pro. 4g • fat 1g • chol. 2mg
sod. 56mg • calc. 139mg • fiber 2g
Mango Lime Smoothie – 4 servings
2 mangoes, peeled, pitted, and cut into 1-inch pieces
½cup lime juice
¼cup apple juice
¼cup mango juice
6 tablespoons sugar
9 ice cubes
¼cup rum (optional)
Place all ingredients in blender jar in order listed, cover, and
blend for 1-2 minutes on HI.
Nutritional information per serving:
Calories 196 (2% from fat) • carb. 43g • pro. 1g • fat 0g • chol. 0mg
sod. 6mg • calc. 16mg • fiber 2g
8
Citrus Julius - 2 servings
1 cup milk
¼cup tangerine juice
¼cup orange juice
2 tablespoons sugar
10 ice cubes
½egg white
½teaspoon vanilla
Place all ingredients in blender jar in order listed, cover, and
blend for 1-2 minutes on HI.
Nutritional information per serving:
Calories 175 (21% from fat) • carb. 24g • pro. 10g • fat 4g
chol. 17mg • sod. 151mg • calc. 162mg • fiber 0g
BREAKFAST
Oatmeal Banana Waffles – makes 8 - 10 waffles
1 cup old-fashioned oatmeal (not instant)
1 cup flour
1 tablespoon baking powder
½teaspoon baking soda
½teaspoon cinnamon
1/8teaspoon nutmeg
3 tablespoons brown sugar
1½ cups buttermilk
2 large eggs
2 medium size ripe bananas
4 tablespoons butter (melted)
1 tablespoon vanilla
Pinch salt
Blend ½ cup oats on HI until they reach a powdery con-
sistency. Put blended oats into a bowl with remaining oats
and set aside. Blend the remainder of dry ingredients until
thoroughly mixed. Add to oats.
Blend milk, eggs, vanilla, banana, butter and vanilla on LO
until smooth.
9
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Waring Mixer
Waring
Waring 800ES Manuel utilisateur
Waring
Waring WSB33XE/K Manuel utilisateur
Waring
Waring 4 Litre Blender Manuel utilisateur
Waring
Waring Torq 2.0 TBB145S6 Manuel utilisateur
Waring
Waring PRO WPB Manuel utilisateur
Waring
Waring PRO MEGAMIX HPB300 Guide rapide
Waring
Waring Xtreme MX1500XTS Manuel du propriétaire
Waring
Waring BB300 Manuel utilisateur
Waring
Waring PRO MEGAMIX HPB300 Manuel utilisateur
Waring
Waring Ellipse MXE2000 Manuel utilisateur
Waring
Waring BB155 SERIES Manuel utilisateur
Waring
Waring LB10 Manuel utilisateur
Waring
Waring Mx series Manuel utilisateur
Waring
Waring Xtreme MX1000XTX Manuel utilisateur
Waring
Waring Xtreme MX1000XTX Manuel utilisateur
Waring
Waring NuBlend BB180 Manuel utilisateur
Waring
Waring HGB140 Manuel utilisateur
Waring
Waring WSB35 Manuel utilisateur
Waring
Waring MX1000XT Manuel utilisateur
Waring
Waring BB185SK Manuel utilisateur
