Voxelab Aquila Manuel utilisateur
3D Printer User Manual
Aquila
V1.3.3-20210302
Note: Each device must be tested before leaving factory. If there are some
residues in extruder or some tiny scratches on the build plate, it is normal and
won’t affect the printing quality.
Content
Notes
How to assemble Aquila
Use The 3D Printer
Product Introduction
Spare Parts
Start Printing
Wire connection
Printing Notice
Trouble Shooting
Thank you for choosing and using the products of Voxelab Technology.
For your convenience, please read this manual carefully before use and
follow the manual strictly. The Voxelab team is always ready to provide
you with the perfect service. Please contact us by email listed, if you have
any problems.
Email：support@voxelab3dp.com
You can also get operational knowledge of the equipment from the
following way:
Voxelab website: www.voxelab3dp.com
Users can get the software, firmware, device maintenance and relevant
contact information via Voxelab website.
A
B
C
01
Notes
Please pay attention to the sharp edges and corners of the profile.
Do not make any modifications to the device. To avoid personal injury or property damage please ensure your operation as followed as the Guide.
Dress properly. Do not wear loose clothing or jewelry. Keeping your hair, clothing and gloves away from moving parts.
Do not directly touch the nozzle and build plate to avoid high-temperature burn.
Do not operate the Aquila in flammable liquid, gas or dust environment (The high temperature generated by Aquila operation may react with dust,
liquid, and flammable gas in the air to cause a fire.)
Do not put the Aquila into the situation in which an unstable environment. The printer quality will be affected.
Children and untrained personnel are not allowed to operate the Aquila alone.
Operate the device in a well-ventilated environment. Some materials may produce odors during the printing process.
Do not manually move the nozzle and printing platform mechanism while booting up, otherwise the device will be damaged.
Never use the device for illegal activities.
Never use the device to make any food storage vessels.
Never put the model into your mouth.
To lower the build plate before loading/unloading filament. The distance between the nozzle and build plate should be kept for at least 50mm.
Keep the device with regular maintenance, to wipe with a dry cloth to remove dust and adhered printing items.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
02
Product Introduction
XE-axis kit
X-axis limit switch
Build plate
Y-axis tensioner
Extruded kit
Material rack and spool holder
Z-axis passive block
1.
2.
3.
4.
5.
6.
7.
X-axis tensioner
Screen
Knob switch
Machine base
Power supply
Voltage regulator
Y-axis limit switch
8.
9.
10.
11.
12.
13.
14.
Y-axis motor
E-axis motor
X-axis motor
Coupling
Z-axis limit switch
Z-axis motor
Power switch and socket
15.
16.
1 7.
18.
19.
20.
21.
14 15
1
2
3
4
5
7
8
9
10
6
11
12
13
16
17
21
20
19
18
03
Equipment Parameters
Model
Print size
Forming technology
Number of nozzle
Layer thickness
Nozzle diameter
XY axis precision
Filament
File format
Working mode
Compatible slicing software
Power specification
Total power
Hotbed temperature
Nozzle temperature
Resume printing function
Filament sensor
Dual z-axis screws
Language switch
Computer operating system
Print speed
Voxelab Aquila
220*220*250mm
FDM
1
0.1mm - 0.4mm
Standard 0.4mm
±0.2mm
φ1.75mm PLA
STL / OBJ / AMF
Memory card offline printing or online printing
Cura / Simplify 3D / VoxelMaker
Input：AC 115/230V 50/60Hz Output：DC 24V
350W
≤100℃
≤250℃
Yes
No
No
English / Chinese
Windows 7/10 / Mac OS
≤180mm/s，30-60mm/s normally
04
Spare Parts
Screen kit *1Printer base *1 Extruder kit *1 Z-axis passive block *1
X-axis tensioner *1 Z-axis motor kit *1 X-axis limit switch kit *1 XE axis kit *1
Z-axis profile(left) *1 Z-axis profile(right) *1 Gantry profile *1 X-axis profile *1 T-shaped screw rod *1
05
Spare Parts
Material rack *1 Material pipe and
nut *1 2020 profile cover *2 Synchronous belt *1
Remove tool *1 Cable tie *1 Needle *1 Storage card and
card reader *1
M6 Pneumatic joint *2 Power cable *1 Wrenches and
screwdrivers *1
Hexagon socket countersunk
head screw M4x20 *2
Hexagon socket head spring
washer combination screw
M5x25 *5
M4 T nuts *6
Hexagon socket head spring
washer combination screw
M4x8 *2
Nozzle *1
Screen bracket *1
Filament *1
Hexagon socket flat round
head screw M4x6 *2
Hexagon socket head spring
washer combination screw
M5x45 *5
Hexagon socket head spring
washer combination screw
M4x12 *4
Hexagon socket flat round
head screw M5x14 *6
06
Installation of Z-axis limit switch kit and Z-axis profiles
Printer base *1
1
Step: Use the four pieces screws M5x45 to fix Z-axis with the base.
Z-axis profile(right) *1
Hexagon socket head spring
washer combination screw
M5x45 *4
M5x45
Z-axis profile(left) *1
07
Installation video can be found on Voxelab Youtube channel
Install Z-axis motor kit and T-shaped screw rod
2
Step: Lock the T-shaped screw rod on the Z-axis motor component, and then use two M4x20 screws
to slightly lock the Z-axis motor component on the profile (as showed above).
Z-axis motor kit *1
T-shaped screw rod *1
Hexagon socket countersunk
head screw M4x20 *2
M4x20
08
Install pneumatic joint, XE-axis kit
X-axis profile
3
Tighten the tube connector by opening end wrench. And fix the XE-axis kit with two pieces M5x14 screws.
XE axis kit *1 X-axis profile *1
M6 Pneumatic joint *1
Open-end wrench *1
Hexagon socket flat round
head screw M5x14 *2
M5x14
09
Table des matières
Autres manuels Voxelab Imprimante 3D
Voxelab
Voxelab Proxima Manuel utilisateur
Voxelab
Voxelab Polaris Manuel utilisateur
Voxelab
Voxelab Proxima 8.9 Manuel utilisateur
Voxelab
Voxelab Aquila C2 Manuel utilisateur
Voxelab
Voxelab Proxima 6.0 Manuel utilisateur
Voxelab
Voxelab Aquila S2 Manuel utilisateur
Voxelab
Voxelab Aries Manuel utilisateur
Voxelab
Voxelab Aquila X2 Manuel utilisateur
Voxelab
Voxelab Aquila X2 Manuel utilisateur
Voxelab
Voxelab Aries Manuel utilisateur
