VOGELS PFW6857 Manuel utilisateur

www.vogels.com

9531-060-Z02-01

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PFW6857

www.vogels.com

Refer to

Step:

9531-060-Z02-01

M16 x 35mm

x1x4

Included components

Required for installation

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PFW6857

14mm

1/4” / 6.5mm

M10 1/2”/13mm

5/16” x 3” 5/16” M6 x 12mm M8 x 10mm M5 x 6mm

x6 x2 x4 x1 x1

2.5mm

5/32”

Stud Finder

Drill Template

Note: It is extremely important that this installation be

carried out by well qualified installation personal and the

mounting surface capable of supported the weight of the

display mount together through out the articulating range of

the PFW6857 series mount.

www.vogels.com

9531-060-Z02-01

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PFW6857

2 3

1/2”/13mm

1/4” / 6.5mm

4 5

With minimum two people place the PFW6857 wall plate

assembly and secure to the wall using the top center hole of

the wall plate.

With a spirit level place on top of the wall plate level the

mounts than secure the remaining bolts through the wall

plate to the wall.

Take the mounting template supplied insure the template

is centered and level at the desired height on the mounting

surface. Mark the mounting hole (six recommended) three

on top and three on bottom.

Note: drill mounting pilot holes to a proper depth to insure

the lag or wedge anchor bolts are fully engaged into the

hole.

www.vogels.com

9531-060-Z02-01

Make sure to keep space between

the bracket and display.

x4 x4 x4

M8 x 16 mm M8 x 20 mm M8 x 30 mm

or or

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PFW6857

1/2”/13mm

8 9

5/32”

Remove the two security screws from the right and left side

of the mounting bracket crossbar and slide the two mounting

brackets inside the left and right side security screw hole

and reinstall the two security screws.

Remove the two security screws from the right and left side

of the mounting bracket crossbar and slide the two mounting

brackets inside the left and right side security screw hole

and reinstall the two security screws.

www.vogels.com

9531-060-Z02-01

11B

11A

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PFW6857

5/32”

Remove the 6mm knurl knob safety screw and set it aside.

Once the mounting brackets are secured to the rear of the

display alighn the round portion of the cross bar so it is on

dead center of the display from left to right side.

Secure the cross bar to the bracket using the four Allen

head screws suppliedv

Invert the flat panel display and place it on a smooth flat

surface so the back of the display panel is facing up.

Align the two mounting bracket to the four mounting points

on the rear of the display and secure them bracket to the

display with the proper “pitch” supplied hardware. Check the

owners manual to determine correct pitch hardware recom-

mended.

www.vogels.com

9531-060-Z02-01

1615

13 With the cross bar fully seating into the receiver

reinstall the 6mm safety knurl knob.

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PFW6857

Power and signal cables may be conveniently run through

the arms of the mount between the display and the power

and signal source to assist in the clean look of the cable

installed.

Note: Once cables have been installed carefully check the

movement of the mount and cables together to insure their is

no “pinching of the cables” when the mount is articulated.

Once all mounting points and level of the display have been

confirmed, remove the plastic covers to route cable from the

wall to the display.

Note: appropriate number of personal and possible installa-

tion lift aids lift and insert the round portion of the crossbar

with display attached and safely insert the round portion of

the cross bar into the open round receiver portion on the

wall mount.

www.vogels.com

9531-060-Z02-01

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PFW6857

M2.5

M10

The PFW6857 has a unique “load offset adjustment” feature

that allow for the heavier weight displays to be tilt corrected

past base center back to level from top to bottom. With

personal lifting gently “out “ on the bottom of the display a

9/16” (14mm) socket may be used to increase or decrease

the tilt feature of the mount.

The two side mounted screws in the receiver head of the

mount can be adjusted to add or subtract tension in the rota-

tion of the display in the mount.

With the 2.5mm Allen head wrench supplied, install the two

each M5 x 6mm mini adjustment Allen head screws supplied

to both sides of the “rotation” stop bar. Slowly turn the display

to the level position in each direction and adjust the two adjust

screw to set max rotation in each direction to level.

M5 x 6 mm

=14mm wrench socket

www.vogels.com

9531-060-Z02-01

ITEM NO.

PART NUMBER

DESCRIPTION

QTY.

3106-000-036-XX

MOUNTING BRACKET WELD ASSEMBLY

(ELLIPTICAL)

6095-PSD-E-E

PLASTIC CAP (ELLIPTICAL TUBE 3.149 X

1.574 )

3106-000-034-XX

SWIVEL TUBE ASSEMBLY

0474-061-104-6X

SCREW PAN PHILLIPS COMB (M6X1.0 X 12)

1658-079-091-6X

SET SCREW CUP POINT ( M8 X 1.25 X 10 )

1658-052-061-6X

SET SCREW CUP POINT ( M5 X 0.8 X 6 )

ITEM NO.

PART NUMBER

DESCRIPTION

QTY.

3106-000-037-XX

MOUNTING BRACKET ASSEMBLY LARGE

(ELLIPTICAL)

3106-000-035-XX

SWIVEL TUBE ASSEMBLY (LARGE)

6095-PSD-E-E

PLASTIC CAP (ELLIPTICAL TUBE 3.149 X

1.574 )

0474-061-104-6X

SCREW PAN PHILLIPS COMB (M6X1.0 X 12)

1658-079-091-6X

SET SCREW CUP POINT ( M8 X 1.25 X 10 )

1658-052-061-6X

SET SCREW CUP POINT ( M5 X 0.8 X 6 )

ITEM NO.

PART NUMBER

DESCRIPTION

QTY.

3106-000-035-XX

SWIVEL TUBE ASSEMBLY (LARGE)

6095-PSD-E-E

PLASTIC CAP (ELLIPTICAL TUBE 3.149 X 1.574 )

0474-061-104-6X

SCREW PAN PHILLIPS COMB (M6X1.0 X 12)

3106-000-038-XX

MOUNTING BRACKET ASSEMBLY XLARGE (ELLIPTICAL)

1658-079-091-6X

SET SCREW CUP POINT ( M8 X 1.25 X 10 )

1658-052-061-6X

SET SCREW CUP POINT ( M5 X 0.8 X 6 )

108 6

415

ITEM NO.

QTY.

PART NO.

REV

DESCRIPTION

1 2

3106-000-032-XX

WALL BRACKET TUBE WELDED ASSEMBLY (ELLIPTICAL)

2 2

3106-000-031-XX

DOUBLE ARM TUBE WELDED ASSEMBLY

3 2

3106-000-033-XX

00 SHORT ARM WELDED ASSEMBLY (ELLIPTICAL)

4 2

2482-21-AM3

SHAFT .75 X 12" LONG

5 2

2482-22-AM3

SHAFT .75 X 20" LONG

6 26

2482-23-AM3

COVER,OBLONG HOLE COVER (PLASTIC)

7 10

0700-205-226-XX

TUBE/PIPE END CAP COVER 1.181 X 1.375 X .616

8 8

6095-PSD-E-E

PLASTIC CAP (ELLIPTICAL TUBE 3.149 X 1.574 )

9 12

0477-087-147-6X

HEX FULLY THREADED 3/8"-16 x 3/4"

10 20

2482-36-AM3

BUSHING FLANGE DIE CAST .750 ID X 1.180 OD X 1.395 FLANGE .

11 10

204X-57A-L00-69

3/8" WASHER NON-STD (.405 ID) X (1.062 OD) X (.098 THK)

12 2

204X-578-502-10

3/8" WASHER NON-STD (.406 ID) X (.748 OD) X (.066 THK)

13 12

204X-86B-N00-28

WASHER DELRIN (.765 ID) X (1.400 OD) X (.020 THK)

14 1

3106-000-022-XX

ROTATIONAL MOUNT ASSEMBLY

15 2

3106-000-013-XX

SHAFT .75 X 6.67" LONG

16 10

2270-45A-E01-45

1" X .3 VINYL FEET

17 10

0548-061-077-6X

SCREW TRUSS HEAD COMBO PHILLIPS (M6X1.0X8)

18 2

3106-000-003-XX

INTERNAL ROTATION TUBE

19 8

1658-061-077-6X

SET SCREW CUP POINT ( M6 X 1.0 x 8 )

20 1

3106-000-024-XX

ROTATIONAL STOP

21 2

0422-061-104-6X

SCREW FLAT 90 DEGREES PHILLIPS (M6 x 1.0 x 12)

22 1

0562-061-077-6X

SCREW KNURL KNOB PHILLIPS (M6X1.0 X 8)

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PFW6857

Table des matières

Autres manuels VOGELS Support et étagère

VOGELS

VOGELS EFW 8205 Manuel utilisateur

VOGELS

VOGELS EFW 6105 Manuel utilisateur

VOGELS

VOGELS 6VO PFW 6851 Manuel utilisateur

VOGELS

VOGELS EFWE 6455 RC - MOUNTING Manuel utilisateur

VOGELS

VOGELS MOMO Motion+ Manuel utilisateur

VOGELS

VOGELS WALL 2105 Manuel utilisateur

VOGELS

VOGELS PFW 6858 Manuel utilisateur

VOGELS

VOGELS WALL 3115 Manuel utilisateur

VOGELS

VOGELS SOUND 1250 Manuel utilisateur

VOGELS

VOGELS EFW 8145 Manuel utilisateur

VOGELS

VOGELS EFF 1140 - BLACK PACKAGING STICKER Manuel utilisateur

VOGELS

VOGELS EFW 8405 Manuel utilisateur

VOGELS

VOGELS TVM 5405 Series Manuel utilisateur

VOGELS

VOGELS WALL 2325 Manuel utilisateur

VOGELS

VOGELS THIN RC 355 Manuel utilisateur

VOGELS

VOGELS PFW 185 Manuel utilisateur

VOGELS

VOGELS WALL 1325 Manuel utilisateur

VOGELS

VOGELS PFW 185 Manuel utilisateur

VOGELS

VOGELS EFW 6205 - 6000 SERIES Manuel utilisateur

VOGELS

VOGELS EFW 8145 Manuel utilisateur

VOGELS

VOGELS EFW 8105 Manuel utilisateur

VOGELS

VOGELS THIN 245 Manuel utilisateur

VOGELS

VOGELS EFW 8305 Manuel utilisateur

VOGELS

VOGELS VFW 465 - MOUNTING Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur