Vivotek IP7133 Manuel utilisateur

P/N:625007400G

EN - 1

English

Power off the Network Camera as

soon as smoke or unusual odors are

detected.

Contact your distributor in the event of

occurrence.

Keep the Network Camera away

from water. If the Network Camera

becomes wet, power off immediately.

Do not place the Network Camera

around heat sources, such as a

television or oven.

Refer to your user’s manual for the

operating temperature.

Keep the Network Camera away from

direct sunlight.

Do not place the Network Camera in

high humidity environments.

Contact your distributor in the event of

occurrence.

Warning Before Installation

EN - 2

Do not place the Network Camera on

unsteady surfaces.

Do not touch the Network Camera

during a lightning storm.

Do not disassemble the Network

Camera.

Do not drop the Network Camera.

Do not insert sharp or tiny objects

into the Network Camera.

EN - 3

English

Camera Stand

IP7133 / IP7134

Warranty Card

Screws

Quick Installation Guide

Power Adapter

Package Contents

Software CD

EN - 4

Network Deployment

Physical Description

Front Panel

Back Panel

Status LED PPrivacy Button

Lens

Built-in Microphone

ETHERNET

RESET

1234 General I/O

Terminal Block

Recessed Reset Button

Power Cord Socket Ethernet 10/100

RJ45 Socket

POWER COLLISION

LINK

RECEIVE

PARTITION

12345

3. Connect the supplied power cable

from the camera to a power outlet.

2. Connect the camera to a switch

via Ethernet cable.

●Use Category 5 Cross Cable

when Network Camera is directly

connected to PC.

1. If you have external devices such as sensors and alarms,

make connections from general I/O terminal block.

1: Power

2: Digital output

3: Digital input

4: Ground

EN - 5

English

MAC:0002D1533318

Assembled from tested components

Complete system not tested

FCC ID: RRK2005100093

IP7133

1. Install “Installation Wizard 2” from the Software Utility directory on the software CD.

2. The program will conduct an analysis of your network environment. After your network is

analyzed, please click on the “Next” button to continue the program.

3. The program will search for VIVOTEK Video Receivers, Video Servers, and Network

Cameras on the same LAN.

4. After searching, the main installer window will pop up. Click on the MAC that matches the

one labeled on the bottom of your device to connect to the Network Camera via Internet

Explorer.

0002D1533318

Installation

Wizard 2

Assigning an IP Address

5. Retrieve live video through a web browser or recording software.

EN - 6

For further setup, please refer to the user's manual on the software CD.

Conﬁgure the Wireless Connection (IP7134 only)

1. Check the SSID for your wireless access point (AP).

2. Go to the IP7134 Conﬁguration page > Wireless LAN.

3. Type in the SSID the same as your AP.

4. Select the Wireless mode as "Infrastructure".

5. Click Save. The Network Camera will reboot.

POWER COLLISION

LINK

RECEIVE

PARTITION

12345

ADSL/Cable/Hub

6. Wait for the live image to be reloaded to your browser. Then, unplug the power cable and

Ethernet cable from the Network Camera.

7. Replug the power cable to the camera. The Network Camera will now operate in wireless

mode.

Note:

1. SSID, abbreviated from Service Set Identiﬁer, is the name assigned to the wireless

network. The IP7134 factory SSID setting is set to "default".

2. Select "Ad-Hoc" wireless mode if you want the IP7134 to communicate without using an

AP or wireless router.

Autres manuels pour IP7133

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Vivotek Caméra de sécurité

Vivotek

Vivotek Supreme SD8363E Manuel utilisateur

Vivotek

Vivotek PZ7151 Manuel utilisateur

Vivotek

Vivotek FE8180 Manuel utilisateur

Vivotek

Vivotek FD7141 Manuel utilisateur

Vivotek

Vivotek SUPREME IP9172-LPC Manuel utilisateur

Vivotek

Vivotek FD816B-HF2 Manuel utilisateur

Vivotek

Vivotek fd8371v Manuel utilisateur

Vivotek

Vivotek IP6114 Manuel utilisateur

Vivotek

Vivotek FD8164V Manuel utilisateur

Vivotek

Vivotek FD8152V Manuel utilisateur

Vivotek

Vivotek FE8174 Manuel utilisateur

Vivotek

Vivotek IP7130 Manuel utilisateur

Vivotek

Vivotek IP3136 Manuel utilisateur

Vivotek

Vivotek Supreme IP8151 Manuel utilisateur

Vivotek

Vivotek SUPREME IP9165-HP Manuel utilisateur

Vivotek

Vivotek 3GPP IP7131 Manuel utilisateur

Vivotek

Vivotek FD8156 Manuel utilisateur

Vivotek

Vivotek PZ6114 Manuel utilisateur

Vivotek

Vivotek FD8361L Manuel utilisateur

Vivotek

Vivotek FD9391-EHTV Manuel utilisateur

Vivotek

Vivotek SD9161-H Manuel utilisateur

Vivotek

Vivotek FE8171V Manuel utilisateur

Vivotek

Vivotek IP8361 Manuel utilisateur

Vivotek

Vivotek IP7361 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur