Vivo STAND-V002L Manuel utilisateur

Dual Monitor Stand

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v002l

[email protected]om www.vivo-us.com 1-800-371-5654

SKU: STAND-V002L

PACKAGE CONTENTS

WARNING!

A (x2)

VESA Plate

B(x2)

Clamp

C(x1)

Base

M-A (x8)

M4x12

M-D (x8)

M5x16

J (x3)

Bolt

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

M-F (x8)

Spacer

M-E (x8)

D5 Washer

D(x1)

Pole

E(x1)

Pole

F (x1)

Pole Cap

G(x1)

Pole Connector

H (x2)

Cable Clip

I (x2)

Fastener

M-C (x8)

M5x12

M-B (x8)

M4x16

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

K (x1)

3mm Allen

Wrench

L (x1)

4mm Allen

Wrench

M (x1)

6mm Allen

Wrench

ASSEMBLY STEPS

STEP 1

Insert pole cap (F).

TOOLS NEEDED

Phillips

Screwdriver

STEP 2

Use allen wrench (L) on bolt (J) to secure the bottom pole (D) to the base (C).

22 lbs

Per Arm

(10 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

STEP 3

Slide the cable management clip (H) down the pole followed by a single clamp (B). Choose your

desired height and secure the clamp to the pole with allen wrench (M).

STEP 4

Screw the pole connector (G) to the threads on top of pole (D) then add pole (E). Use allen wrench (K)

to tighten down the two screws inside the pole connector.

STEP 5

OPTION A: Flat Back Monitor

Secure VESA plate (A) to the back of your monitor. Layer VESA plate on top of washer (M-E), then insert

correct size bolt to fit the holes in your monitor.

STEP 6

Add the second single clamp (B) to desired height and secure to the pole with allen wrench (M).

M- A

M- C

M- E

STEP 6 (Continued)

STEP 7

Slide the monitors onto (B) clamps. Use fasteners (I) to secure them.

OPTION B: Curved Back Monitor

Secure VESA plate (A) to the back of your monitor. Layer spacers (M-F), VESA plate, washers (M-E),

then insert correct size bolt to fit the holes in your monitor.

M- B

M- D

M- E

M- F

STEP 8

Adjust tilt angle with allen wrench (M).

STEP 9

Route wires through the cable management clips. Place allen wrenches into the cable management

clips for easy accessibility.

Last Updated: 04/26/2019

If any parts are received damaged or defective, please contact us. We are happy to

replace parts to ensure you have a fully functioning product.

For more VIVO products, check out our website at:

www.vivo-us.com.

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

[email protected]om www.vivo-us.com 1-800-371-5654

Table des matières

Autres manuels Vivo Support et étagère

Vivo

Vivo MOUNT-DLMM1 Manuel utilisateur

Vivo

Vivo STAND-TV00Y Manuel utilisateur

Vivo

Vivo DESK-V000ME Manuel utilisateur

Vivo

Vivo STAND-V102AF Manuel utilisateur

Vivo

Vivo MOUNT-PLAY3B Manuel utilisateur

Vivo

Vivo STAND-V102SF Manuel utilisateur

Vivo

Vivo MOUNT-VP01W Manuel utilisateur

Vivo

Vivo STAND-V001OU Manuel utilisateur

Vivo

Vivo STAND-PAD1 Manuel utilisateur

Vivo

Vivo STAND-V002F Manuel utilisateur

Vivo

Vivo MOUNT-VP01B Manuel utilisateur

Vivo

Vivo MOUNT-VW080L Manuel utilisateur

Vivo

Vivo STAND-V003P V003P Manuel utilisateur

Vivo

Vivo STAND-SP03C Manuel utilisateur

Vivo

Vivo DESK-AC01P-B Manuel utilisateur

Vivo

Vivo MOUNT-KB08SW Manuel utilisateur

Vivo

Vivo STAND-V001R Manuel utilisateur

Vivo

Vivo STAND-V012F Manuel utilisateur

Vivo

Vivo STAND-VRH1B Manuel utilisateur

Vivo

Vivo MOUNT-VP01B Manuel utilisateur

Vivo

Vivo MOUNT-AR02 Manuel utilisateur

Vivo

Vivo STAND-V003P Manuel utilisateur

Vivo

Vivo STAND-V104Z Manuel utilisateur

Vivo

Vivo STAND-V003D Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur