Vivo MOUNT-DLMM1 Manuel utilisateur

Mount Designed for Dell OptiPlex Micro

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-dlmm1

SKU: MOUNT-DLMM1

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual

and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect

assembly, or inappropriate use.

PACKAGE CONTENTS

WARNING!

A (x1)

Mounting Plate

TOOLS NEEDED

Phillips

Screwdriver

B (x1)

Locking Plate

D (x2)

Cable Strap E (x4)

Pads

C (x1)

Clamp

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

S-A (x1)

Thumscrew

S-B (x2)

M4x6mm

Screw

S-C (x8)

M4x10mm

Screw

S-D (x4)

M5x6mm

Screw

S-E (x4)

M4 Washer

S-F (x4)

M4 Nut

S-G (x4)

M5 Washer

ASSEMBLY OPTIONS:

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury. 5lbs

(2.4kg)

Desk Clamp

pg. 3-5

Allows micro PC to clamp

to a desktop surface with a

thickness of 10mm to 50mm.

VESA Plate

Monitor Arm

pg. 6-8

Mount installs between

monitor and monitor

mount arm.

VESA Plate

Freestanding Monitor

pg. 9-11

Utilizes VESA holes in

freestanding monitor to

hold micro PC

ASSEMBLY OPTION A: Desk Clamp

STEP 2

STEP 1

For Desktops with a 10mm to 40mm Thickness:

Dissemble Clamp (C) using a Phillips screwdriver. Turn Lower Clamp (C1) upside and reassemble

Clamp (C) as shown below.

*For Desktops with a 15mm to 50mm Thickness:

Proceed to Step 2.

Choose desired mounting orientation and connect Mounting Plate (A) to back side of Clamp (C) at

desired height using M4x6mm Screws (S-B) and a Phillips screwdriver.

S-B

STEP 4

Place assembly onto desktop and tighten hand bolt to secure.

STEP 3

Secure Locking Plate (B) to back side of Mounting Plate (A) using M5x6mm Screws (S-D),

M5 Washer (S-G), and a Phillips screwdriver.

AS-D

S-G

STEP 5

Attach Pads (E) to the PC to procect against accidental damage, then securely place the PC into

the mount. Secure using Thumbscrews (S-A).

Attach Cable Straps (D) to slots on underside of assembled mount to secure charging cord

power brick.

S-A

ASSEMBLY OPTION B: VESA Plate - Monitor Arm

STEP 1

STEP 2

Secure Mounting Plate (A) to VESA holes on the back of the monitor using M4x10mm Screws (S-C)

and M4 Washers (S-E) and a Phillips screwdriver.

Attach Locking Plate (B) to the front side of the VESA Plate from your monitor mount using M4x10mm

Screws (S-C), M4 Nuts (S-F) and a Phillips screwdriver.

S-C

S-F

S-C

S-E

STEP 3

STEP 4

Secure Locking Plate (B) to Mounting Plate (A) using M5x6mm Screws (S-D), M5 Washers (S-G), and

a Phillips screwdriver.

S-D

S-G

Attach Pads (E) to the PC to procect against accidental damage, then securely place the PC into

the mount. Secure using Thumbscrews (S-A).

S-A

STEP 5

Attach Cable Straps (D) to slots on underside of assembled mount to secure charging cord

power brick.

Secure VESA plate to monitor mount using manufacturer guidelines.

ASSEMBLY OPTION C: VESA Plate - Freestanding Monitor

STEP 1

Secure Locking Plate (B) to Mounting Plate (A) using M5x6mm Screws (S-D), M5 Washers (S-G),

and a Phillips screwdriver.

Secure Mounting Plate (A) to VESA holes on the back of the monitor using M4x10mm Screws (S-C)

and M4 Washers (S-E) and a Phillips screwdriver.

S-C

S-E

S-D

S-G

STEP 2

Attach Pads (E) to the PC to procect against accidental damage, then securely place the PC into the

mount. Secure using Thumbscrews (S-A).

S-A

Table des matières

Autres manuels Vivo Support et étagère

Vivo

Vivo DESK-V000VLEW Manuel utilisateur

Vivo

Vivo STAND-V002C Manuel utilisateur

Vivo

Vivo MOUNT-VP06B Manuel utilisateur

Vivo

Vivo STAND V004M Manuel utilisateur

Vivo

Vivo STAND-V001JB Manuel utilisateur

Vivo

Vivo STAND-V011W Manuel utilisateur

Vivo

Vivo STAND-V100F Manuel utilisateur

Vivo

Vivo STAND-TV01B Manuel utilisateur

Vivo

Vivo STAND-TV07 Manuel utilisateur

Vivo

Vivo MOUNT-CAR02 Manuel utilisateur

Vivo

Vivo STAND-TV65A Manuel utilisateur

Vivo

Vivo DESK-V000VE Manuel utilisateur

Vivo

Vivo MOUNT-E-UP44 Manuel utilisateur

Vivo

Vivo STAND-RACE1A Manuel utilisateur

Vivo

Vivo MOUNT-PC02S Manuel utilisateur

Vivo

Vivo MOUNT-VW02A Manuel utilisateur

Vivo

Vivo MOUNT-V00MIC Manuel utilisateur

Vivo

Vivo STAND-V002 Manuel utilisateur

Vivo

Vivo STAND-V002 Manuel utilisateur

Vivo

Vivo STAND-TS38C-T Manuel utilisateur

Vivo

Vivo STAND-V003V Manuel utilisateur

Vivo

Vivo STAND-V004Y Manuel utilisateur

Vivo

Vivo STAND-VAD3 Manuel utilisateur

Vivo

Vivo STAND-SIT1BW Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur