Vivo STAND-PAD1 Manuel utilisateur

Anti-theft Kiosk for Apple iPad Pro

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-pad1

SKU: STAND-PAD1

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

TOOLS NEEDED

WARNING!

Phillips

Screwdriver

A (x1)

Anti-the Box

B(x1)

Pole

C(x1)

Base

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

D(x4)

Rubber Pad

E(x1)

Decorative Cover

F (x2)

6.3x55

G (x2)

Concrete Anchor

H (x1)

Key

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

I(x4)

M5x6

J(x4)

M8x20

K (x1)

4mm Allen

Wrench

L (x1)

6mm Allen

Wrench

M (x1)

Button

ASSEMBLY STEPS

STEP 1

Attach rubber pads (D) to underside of base (C).

STEP 2

Slide decorative cover (E) onto pole (B). Then, attach base (C) to pole (B) using screws (J) and 6mm

allen wrench (L).

STEP 3

OPTION A: Floor Stand

For free standing use, simply place the mount on the floor.

OPTION B: Wood Floor Installation

Place stand in desired location and li cover (E). Use pencil to mark drilling locations. Drill 2.2”

(55mm) deep holes using 3/16” (4.5mm) drill bit, then use 6.3x55 screws (F) to secure base to floor.

Replace cover (E).

STEP 3 (Continued)

OPTION C: Concrete/Brick Installation

Place stand in desired location and li cover (E). Use pencil to mark drilling locations. Drill 2.4” (60mm)

deep holes using 3/8” (10mm) drill bit, press concrete anchors (G) into holes, then use 6.3x55 screws

(F) to secure base to floor. Replace cover (E).

STEP 4

Attach anti-the box (A) to pole (B) using M5x6 screws (I), making sure the lock is facing down for

correct orientation.

STEP 5

STEP 7

Place 12.9” iPad Pro in anti-the box (A) and connect

charging cable.

STEP 6

Attach anti-the box cover by hooking latches into slots on the top of the box.

Lock anti-the box (A) with key (H). Adjust tilt and rotation with 4mm allen key (K).

For accessible Home button, use rubber button pre-installed in the anti-the box cover. For

inaccessible Home button, remove the rubber button and replace with the plastic button (M). Please

note that the button should be installed on the inside of the box cover.

STEP 8

Adjust as Desired

LAST UPDATED: 03/06/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table des matières

Autres manuels Vivo Support et étagère

Vivo

Vivo STAND-V001C Manuel utilisateur

Vivo

Vivo STAND-V101Q Manuel utilisateur

Vivo

Vivo STAND-V006 Manuel utilisateur

Vivo

Vivo STAND-V001H Manuel utilisateur

Vivo

Vivo STAND-V001M Manuel utilisateur

Vivo

Vivo STAND-V102OW Manuel utilisateur

Vivo

Vivo STAND-HS03B Manuel utilisateur

Vivo

Vivo STAND-TV01L Manuel utilisateur

Vivo

Vivo MOUNT-VW01 Manuel utilisateur

Vivo

Vivo MOUNT-KB05E Manuel utilisateur

Vivo

Vivo MOUNT-PC04A Manuel utilisateur

Vivo

Vivo STAND-VRH1B Manuel utilisateur

Vivo

Vivo MOUNT-PC10BU Manuel utilisateur

Vivo

Vivo STAND-V100A Manuel utilisateur

Vivo

Vivo STAND-V000D Manuel utilisateur

Vivo

Vivo STAND-TV17-S Manuel utilisateur

Vivo

Vivo STAND-RACE1A Manuel utilisateur

Vivo

Vivo STAND V003M Manuel utilisateur

Vivo

Vivo MOUNT-PC05C Manuel utilisateur

Vivo

Vivo STAND-V106A Manuel utilisateur

Vivo

Vivo MOUNT-VW00 Manuel utilisateur

Vivo

Vivo MOUNT-KB03D Manuel utilisateur

Vivo

Vivo STAND-V002F Manuel utilisateur

Vivo

Vivo MOUNT-HP02M Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur