Viotek H270 Manuel utilisateur

H270

LED MONITOR

USER MANUAL

In order to continue serving our customers and providing the best products, our product information

including our user manuals may receive updates from time to time. Please check our website for the

latest user manuals and product materials.

Table of Contents

Section 1: Safety Precautions..................................................... 4

Section 2: Box Contents.............................................................. 4

Section 3: Product Overview....................................................... 5

3.1 – Monitor Buttons ............................................................... 5

3.2 – Monitor Ports................................................................... 5

Section 4: Stand Installation ....................................................... 6

Section 5: Wall Mounting............................................................. 7

Section 6: Connectivity Options................................................. 8

6.1 – Connecting the Power Cable........................................... 8

6.2 – VGA Connectivity............................................................ 8

6.3 – HDMI Connectivity .......................................................... 8

Section 7: Basic Operation.......................................................... 9

Section 8: Indicator Light ............................................................ 9

Section 9: OSD Setup................................................................... 10

9.1 – OSD Menu Functions ...................................................... 11

Section 10: Troubleshooting ....................................................... 12

Section 11: Speciﬁcations ........................................................... 13

Section 12: 1 Year Limited Hardware Warranty......................... 14

Section 1: Safety Precautions

Read and observe the following warnings and information below.

1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or

lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp

cloth, wait for your monitor to completely dry before plugging it in again.

2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor.

3. This monitor features ventilation openings on the back of the unit. Avoid blocking these

openings to prevent the monitor from overheating.

4. Avoid placing this monitor near any heat sources e.g: portable heaters or heating vents,

as this may cause damage to your monitor.

5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen or any

part of the monitor.

6. Do not insert anything into any part of the monitor especially the ventilation openings.

7. Always make sure your monitor is placed on a secure, level surface to prevent it from

falling and sustaining damage.

8. Unplug your monitor during any extended periods of non-use.

9. Do not place heavy items on the monitor or monitor cables.

10. Do not attempt to disassemble or remove parts from the monitor. Any disassembly or

modication etc. not performed by an authorized technician can result in damage to the

monitor and/or possible exposure to high voltage electricity which may lead to serious

injury or death.

VIOTEK®shall not be held responsible for injury or damage of products or persons due to

failure to adhere to the aforementioned precautions or any others noted hereafter.

Section 2: Box Contents

Monitor x 1 Stand Stem x 1 Stand Base x 1

HDMI Cable x 1 User Manual x 1Power Cable x 1

(12v, 3A)

Section 3: Product Overview

3.1 – Monitor Buttons

6 HDMI Connector: Insert one end of the HDMI cable into the computer’s HDMI output

and connect the other end to the monitor’s HDMI port.

7 VGA Connector: Insert one end of the VGA cable into the computer’s VGA output and

connect the other end to the monitor’s VGA port.

8 DC IN Power connector: Insert the power cable to supply power to the monitor.

6 7 8

2 3 4 51

1 M Menu Button: Press to display the OSD menu or enter sub-menus.

2 Button: Press to move down in the menus.

3 Button: Press to move up in the menus.

4 E Exit Button:Press to exit current menu.

5 Power Button: Press to turn the monitor on/off.

3.2 – Monitor Ports

Section 4: Stand Installation

1. Open the package, take out the product with the foam still attached, and gently place it on

a desktop or table.

2. Take out the two parts of the stand and remove the foam covering the back of the monitor.

Attach the stem to the base by inserting it into the opening and turning it to lock it in place.

Opening

3. Attach the stand to monitor via the opening on the back. It should click into place. Make

sure the stand is securely attached to the back of the monitor then remove the monitor from

the remaining foam section and stand it up on the desired surface.

If needed, the stand can easily be detached from the monitor by pressing the button

on the back of the monitor just above the stand. Make sure the monitor is laid on a at

surface then press the button and pull the stand away to remove it.

Button

Section 5: Wall Mounting

VESA and/or mounting accessories not included.

1. Open the package, take out the product with the foam still attached, and gently

place it on a desktop or table. If the monitor is attached to the stand, remove the

stand.

2. At the back of the monitor, attach a 75x75mm VESA adapter using 4x screws.

Adapter and screws not included.

75mm

VESA Adapter 75 x 75 mm

(Not included)

Screws x 4 (Not included)

3. Follow the directions that came with your mounting base (not included) and

install the monitor on the wall.

Wall

Mounting Base

(Not included)

Section 6: Connectivity Options

6.1 – Connecting the Power Cable

Connect the included power cable into the DC IN port in the back of the monitor, then plug the

other end into a wall outlet.

Power Cable

6.2 – VGA Connectivity

In order for the monitor to receive VGA signals from the computer, use the VGA cable to

connect the monitor to the computer.

VGA OUTPUT

VGA Cable (Not included)

6.3 – HDMI Connectivity

In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to

connect the monitor to the computer.

HDMI OUTPUT

HDMI Cable (Included)

Section 7: Basic Operation

1. Insert one end of the HDMI cable into your PC’s graphics card. VGA may also be used.

VGA cable not included.

For optimal refresh rate (or “performance”), it is recommended to use an HDMI cable with

the monitor’s corresponding connector.

2. Connect the other end of the cable to the corresponding connector on your monitor. See

the image below.

HDMI Connector

VGA Connector

3. Connect the power cable to your monitor then connect the other end to your power

source. It is recommended that you use a surge protector with adequate voltage if a wall

outlet cannot be reached directly.

4. Locate the power button on the monitor and press it to turn the monitor on.

If you cannot locate the power button, please refer to Section 3.1.

Section 8: Indicator Light

This light is located on the bottom of the monitor.

Indicator Light

Solid blue light indicates the power and the monitor is operating normally. Flashing blue

light indicates no video source has been detected or the monitor has entered standby mode.

Please ensure your computer is on and all video cables are fully inserted and/or connected.

Section 9: OSD Setup

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings

and appears on screen after turning on the monitor and pressing the Mbutton.

When using the monitor for the rst time, settings will automatically adjust to

optimal settings according to your computer’s conguration and parts etc.

1. Press Mbutton to enter the OSD menu.

BRIGHTNESS

CONTRAST

ECO

DCR

STANDARD

OFF

3. Press or to browse functions.

• Highlight the desired function, then press Mto enter the sub-menu.

• Press or to browse sub-menus, then press Mto highlight the desired

function.

• Press or to highlight an option, then press M to conrm the settings and exit

the current screen.

4. Press Eto exit the current screen.

Table des matières

Autres manuels Viotek Moniteur

Viotek

Viotek GNV27CB Manuel utilisateur

Viotek

Viotek NBV24CB2 Manuel utilisateur

Viotek

Viotek GFI27QXA Manuel utilisateur

Viotek

Viotek GN27DW Manuel utilisateur

Viotek

Viotek GNV30CBXA Manuel utilisateur

Viotek

Viotek GFI24CBA Manuel utilisateur

Viotek

Viotek GN32DR Manuel utilisateur

Viotek

Viotek GNV32DB Manuel utilisateur

Viotek

Viotek GFV22CB Manuel utilisateur

Viotek

Viotek SUW49DA Manuel utilisateur

Viotek

Viotek GFV24C Manuel utilisateur

Viotek

Viotek GFV27DAB Manuel utilisateur

Viotek

Viotek GNV34DB Manuel utilisateur

Viotek

Viotek GN35LD Manuel utilisateur

Viotek

Viotek GNV34CB Manuel utilisateur

Viotek

Viotek GFT27CXB2 Manuel utilisateur

Viotek

Viotek GN35DA Manuel utilisateur

Viotek

Viotek GNV30CB Manuel utilisateur

Viotek

Viotek H250 Manuel utilisateur

Viotek

Viotek NB32CW Manuel utilisateur

Viotek

Viotek LinQ Manuel utilisateur

Viotek

Viotek GN32DA Manuel utilisateur

Viotek

Viotek GN27CB Manuel utilisateur

Viotek

Viotek GN34C Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation