Viessmann VITOPLEX 100 Mode d'emploi

Service instructions

for contractors

VIESMANN

Vitoplex 100

Type PV1, 780 to 2000 kW

Oil/gas boiler

For applicability, see the last page

VITOPLEX 100

5692 667 GB 3/2013 Please keep safe.

Please follow these safety instructions closely to prevent accidents and mate-

rial losses.

Safety instructions explained

Danger

This symbol warns against the

risk of injury.

!Please note

This symbol warns against the

risk of material losses and envi-

ronmental pollution.

Note

Details identified by the word "Note" con-

tain additional information.

Target group

These instructions are exclusively inten-

ded for qualified contractors.

■ Work on gas installations must only be

carried out by a registered gas fitter.

■ Work on electrical equipment must

only be carried out by a qualified elec-

trician.

■ The system must be commissioned by

the system installer or a qualified per-

son authorised by the installer.

Regulations

Observe the following when working on

this system:

■ Statutory regulations regarding the

prevention of accidents

■ Statutory regulations regarding envi-

ronmental protection

■ Codes of practice of the relevant trade

associations

■ All current safety regulations as

defined by DIN, EN, DVGW, TRGI,

TRF, VDE and all locally applicable

standards

■ Gas Safety (Installation & Use) Regu-

lations

– the appropriate Building Regulation

either the Building regulations, the

Building Regulation (Scotland), Build-

ing Regulations (Northern Ireland),

– the Water Fittings Regulation or

Water Bylaws in Scotland,

– the current I.E.E. Wiring Regula-

tions.

If you smell gas

Danger

Escaping gas can lead to explo-

sions which may result in serious

injury.

■ Do not smoke. Prevent naked

flames and sparks. Do not

switch lights or electrical appli-

ances on or off.

■ Close the gas shut-off valve.

■ Open windows and doors.

■ Evacuate any people from the

danger zone.

■ Notify your gas or electricity

supply utility from outside the

building.

■ Shut off the electricity supply to

the building from a safe place

(outside the building).

Safety instructions

5692 667 GB

If you smell flue gas

Danger

Flue gas can lead to life-threat-

ening poisoning.

■ Shut down the heating system.

■ Ventilate the installation site.

■ Close all doors in the living

space.

Flue systems and combustion air

Ensure that flue systems are clear and

cannot be sealed, for instance due to

accumulation of condensate or other

causes. Ensure a sufficient supply of

combustion air.

Instruct system users that subsequent

modifications to the building characteris-

tics are not permissible (e.g. cable/pipe-

work routing, cladding or partitions).

Danger

Life-threatening poisoning

caused by carbon monoxide in

the flue gas occurs as a result of

leaking or blocked flue systems

or an insufficient supply of com-

bustion air.

Ensure the flue system is in

proper working order. It must not

be possible to close apertures for

interconnected combustion air

supply.

Extractors

Operating appliances that extract air to

the outside (cooker hoods, extractors, air

conditioning units, etc.) can create neg-

ative pressure. If the boiler is operated at

the same time, this can lead to reverse

flow of the flue gas.

Danger

The simultaneous operation of

the boiler and appliances that

extract air to the outside can

result in life threatening poison-

ing due to reverse flow of the flue

gas.

Fit an interlock circuit or take suit-

able steps to ensure a sufficient

supply of combustion air.

Working on the system

■ Where gas is used as the fuel, close

the main gas shut-off valve and safe-

guard it against unintentional reopen-

ing.

■ Isolate the system from the power sup-

ply (e.g. by removing the separate fuse

or by means of a mains isolator) and

check that it is no longer 'live'.

■ Safeguard the system against recon-

nection.

!Please note

Electronic assemblies can be

damaged by electrostatic dis-

charge.

Prior to commencing any work,

touch earthed objects, such as

heating or water pipes to dis-

charge static loads.

Repair work

!Please note

Repairing components that fulfil a

safety function can compromise

the safe operation of your sys-

tem.

Defective components must be

replaced with genuine

Viessmann spare parts.

Safety instructions

Safety instructions (cont.)

5692 667 GB

Auxiliary components, spare and

wearing parts

!Please note

Spare and wearing parts that

have not been tested together

with the system can compromise

its function. Installing non-author-

ised components and making

non-approved modifications or

conversions can compromise

safety and may invalidate our

warranty.

For replacements, use only orig-

inal spare parts supplied or

approved by Viessmann.

Safety instructions

Safety instructions (cont.)

5692 667 GB

Product information

Intended use......................................................................................................... 6

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance.......................................... 7

Further details regarding the individual steps....................................................... 9

Parts lists............................................................................................................ 19

Water quality

Water quality requirements.................................................................................. 22

Using antifreeze in boilers.................................................................................... 24

Commissioning/service reports........................................................................ 26

Specification....................................................................................................... 27

Certificates

Declaration of conformity...................................................................................... 28

Keyword index.................................................................................................... 29

Index

5692 667 GB

The appliance is only intended to be

installed and operated in sealed unven-

ted heating systems that comply with

EN 12828, with due attention paid to the

associated installation, service and

operating instructions as well as the

details in the datasheet.

It is only designed for the heating up of

heating water.

Commercial or industrial usage for a pur-

pose other than the heating up of heating

water shall be deemed inappropriate.

Intended use presupposes that a fixed

installation in conjunction with permissi-

ble components designed for this pur-

pose has been carried out.

Every other use will be deemed to be

inappropriate. Any resulting losses are

excluded from the manufacturer's liabil-

ity.

Any usage beyond this must be

approved by the manufacturer for the

individual case.

Intended use also includes the adher-

ence to maintenance and inspection

intervals.

Product information

Intended use

5692 667 GB

For further information regarding the individual steps, see the page indicated

Commissioning steps

Inspection steps

Maintenance steps Page

••• 1. Commissioning the system........................................... 9

• • 2. Shutting down the system............................................. 10

• • 3. Opening the boiler door and cleaning cover............... 11

•4. Cleaning the turbulators, heating surface, flue outlet

and flue pipe.................................................................... 12

••• 5. Checking all gaskets and packing cords on the flue

gas side

••• 6. Checking the thermal insulation components on the

boiler door

•7. Inserting the turbulators................................................ 13

• • 8. Securing the boiler door and cleaning cover............... 13

••• 9. Checking all connections on the heating water side

and the sensor well for leaks

••• 10. Checking the function of the safety equipment........... 14

••• 11. Checking the expansion vessel and system pressure 14

••• 12. Checking the firm seating of electrical plug-in

connections and cable grommets

••• 13. Checking the thermal insulation for firm seating

• • 14. Checking the water quality............................................ 16

• • 15. Cleaning the sight glass in the boiler door.................. 17

••• 16. Checking the mixer for ease of operation and

tightness.......................................................................... 17

••• 17. Checking the function of the return temperature

raising facility (if installed)

••• 18. Checking the installation room ventilation

••• 19. Checking the flue pipe for tightness

• • 20. Adjusting the burner...................................................... 17

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance

5692 667 GB

Commissioning steps

Inspection steps

Maintenance steps Page

•21. Operating and service documents................................ 18

Commissioning, inspection, maintenance

Steps - commissioning, inspection and… (cont.)

5692 667 GB

Commissioning the system

Operating and service instruc-

tions for the control unit and the

burner

01. Check that the turbulators are fully

pushed into the hot gas flues (see

page 13); for this, open the boiler

door and close the gas shut-off

valve.

02. Check that the installation room

vent is open.

03. Fill the heating system with water

and vent the system.

Permissible operating pressure:

6 bar (0.6 MPa)

!Please note

Scaling and boiler damage

may result if the system is

not operated with fully soft-

ened heating water.

Operate boilers only with

softened water.

Observe the instructions in

chapter "Water quality

requirements".

04. Enter the amount of fill water and the

water hardness into the table in

chapter "Checking the water qual-

ity".

05. Check the system pressure.

06. Check the oil level or the gas supply

pressure.

07. Open the flue gas damper (if instal-

led).

08. Check that the cleaning aperture on

the flue outlet is closed.

09. Open the shut-off valves in the oil or

gas line.

10. Switch ON the mains isolator, the

switch for the heating circuit pump

and the burner ON/OFF switch in

this order (observe the burner man-

ufacturer's instructions).

11. When heating the system from cold

(also when restarting after mainte-

nance and cleaning work), prevent

all heat supply to heat consumers,

in order to clear the dew point range

as quickly as possible.

!Please note

During boiler heat-up,

unpleasant fumes and

odours can result from out-

gassing from the thermal

insulation, the heating block

and the paint.

Vent the room during com-

missioning.

Commissioning, inspection, maintenance

Further details regarding the individual steps

5692 667 GB

12. After the flow temperature has been

reached, switch ON the heat con-

sumers in sequence and change the

burner over to automatic mode.

!Please note

When testing the flue gas for

CO, internal gases being

expelled from the heating

block can cause higher val-

ues.

Continue to operate the

boiler until a decline can be

clearly recognised.

13. Check all gaskets and plugs, and

retighten if necessary.

14. Check the boiler door and cleaning

cover after approx. 50 hours run and

retighten all screws.

Shutting down the system

1. Switch OFF the mains isolator or the

power supply, and safeguard against

unauthorised reconnection.

2. Interrupt the burner power supply.

For this, pull plugs fA and lÖ from

the burner, if installed.

3. Close the gas shut-off valve.

Danger

Heating water escaping under

pressure can cause personal

injury.

Only open the connections on the

heating water side after the boiler

has been depressurised.

!Please note

Draining the boiler with a suction

pump will create negative pres-

sure inside the boiler.

Drain the boiler with a suction

pump only when the air vent

valve has been opened.

Commissioning, inspection, maintenance

Further details regarding the individual steps (cont.)

5692 667 GB

Autres manuels pour VITOPLEX 100

Table des matières

Autres manuels Viessmann Chaudière

Viessmann

Viessmann Vitocrossal 300 CA3B Instructions d'installation

Viessmann

Viessmann Vitodens 200-W B2HA series Manuel utilisateur

Viessmann

Viessmann Vitodens 242-F Guide rapide

Viessmann

Viessmann VITOROND 200 Manuel utilisateur

Viessmann

Viessmann Vitodens 100-W WB1B Series Guide rapide

Viessmann

Viessmann KOB Pyromat ECO Mode d'emploi

Viessmann

Viessmann Vitocrossal Manuel utilisateur

Viessmann

Viessmann VITODENS 200 Manuel utilisateur

Viessmann

Viessmann Vitocell 200 Cylinder Guide de l'utilisateur

Viessmann

Viessmann VITROND 200 Manuel utilisateur

Viessmann

Viessmann Vitodens 200-W WB2B Series Mode d'emploi

Viessmann

Viessmann VITOROND 200 Manuel d'utilisation original

Viessmann

Viessmann Vitodens 200-W System Mode d'emploi

Viessmann

Viessmann Vitolig 300 Mode d'emploi

Viessmann

Viessmann VITOCROSSAL 200 Mode d'emploi

Viessmann

Viessmann Vitodens 100-W Guide rapide

Viessmann

Viessmann VITOCELL 100-U Mode d'emploi

Viessmann

Viessmann Vitola 200 Manuel utilisateur

Viessmann

Viessmann Vitoflame 300 VHG III Mode d'emploi

Viessmann

Viessmann VITOGAS 100 Mode d'emploi

Viessmann

Viessmann Vitodens 100-W Manuel utilisateur

Viessmann

Viessmann Vitocrossal Manuel utilisateur

Viessmann

Viessmann VITORONDENS 200-T Mode d'emploi

Viessmann

Viessmann Vitodens 222-F Manuel d'instructions

Manuels Chaudière populaires d'autres marques

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur

Radijator

Radijator BIO max 23.1 Manuel utilisateur

Brunner

Brunner BSV 20 Manuel utilisateur

Buderus

Buderus Logamax GB062-24 KDE H V2 Manuel utilisateur

Potterton

Potterton 50e Fiche technique

UTICA BOILERS

UTICA BOILERS TriFire Manuel utilisateur

Joannes

Joannes LADY Series Manuel

ECR International

ECR International UB90-125 Manuel d'instructions

Froling

Froling FHG Turbo 3000 Manuel utilisateur

Froling

Froling P4 Pellet 8 - 105 Manuel utilisateur

U.S. Boiler Company

U.S. Boiler Company K2 Manuel utilisateur

Henrad

Henrad C95 FF Manuel utilisateur

NeOvo

NeOvo EcoNox EF 36 Manuel utilisateur

Potterton

Potterton PROMAX SL 12 Manuel utilisateur

Eco Hometec

Eco Hometec EC 25 COMPACT Manuel utilisateur

Baxi

Baxi Prime 1.24 Manuel utilisateur

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuel utilisateur

Radiant

Radiant R2K 55 Manuel